OfficeJet pro 8100: run dll error message

Similar Questions

• OfficeJet Pro 8600: Run DLL error

  There was a problem starting C:\Program HP HP Officejet Pro 8600\bin\HPStatusBl.dll

  Hello
  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts 8600 printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• Run DLL Error Message

  I have a Dell Inspiron 1545 with Vista. I receive the message of DLL to run after starting:

  c:\users\charlotte\AppData\Local\Smartcrtlog\oleWITime.dll

  I used the Microsoft Malicious Software Removal Tool, but nothing was found. I did audits of viruses and malware, but still nothing.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I get a run dll error message and its saying that something is not found

  When I restart my computer, an error message appears and it says this: C:\users\appdata\local\iboromazizofero.dll

  In addition, the computer has bad to restart

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• OfficeJet pro 6830: 08024200 × b error message

  I was not able to find any help on the HP site for the error message 08024200 b × for the software update failed. This happened, unbeknownst to me, almost every day since June this year.  I have no message from HP or MS about the situation.  Any help?

  Hey @freddy42,.

  Help is here! I am happy that you have joined the community of Forums of HP Support to ask for help. I read your post and you understand that you receive the error 08024200 × b code. I'll do my best to help you to resolve the error code. Please, try the following steps:

  • Go to settings
  • Open devices
  • Open devices
  • Click on Device Manager
  • Search for the unknown printer
  • Right click on the unknown printer
  • Click on properties
  • Go to the driver tab
  • Click on delete

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems.

  Take care

• Officejet Pro 8600 print head error message

  I get an error message "print head seems to be missing, not detected, or incorrectly installed. Printhead missing or failed. "I followed the solutions provided on the printer as printer be disconnected and reconnected. out of the cartridges as demo showed. Everything was going well. Reconnected to the router wireless system. All to nothing does not. I bought this printer in February of this year and had no problems until this has happened in the last few weeks. It is still under warranty. I need this fixed or replaced immediately. What should I do? Thank you for your help.

  Hello

  Please click HERE to access the procedure which should solve the problem.

• OfficeJet Pro 8500 'in paper' error message

  Someone had the same problem?  Brand new printer, but continue to receive the same message 'in paper' after a few cycles of impression - even though the bin is full.  I take the paper and the restacks.  Usually works after that, but never fails to do it again.  Same paper that I use in all other printers - Xerox.  Good quality.  The problem seems to be that the rolls are not delivered in the paper in the tray.  I went to Costco, it's the second printer - same problem.  Any ideas to fix? Very frustrating.

  What does not and has worked for me... Partial Reset, printer replacement, different paper, fanning and otherwise setting paper, parameters, all did not help.  However, cleaning the paper feed rollers tray up to fix the problem.  My first camera was not often, but I was too stubborn to clean the rollers on a new printer.  The second unit was very bad, fails on almost every multi-page print job.  What is strange is that the first sheet feed almost always correctly and the second sheet or later version doesn't have to feed, which suggests a software problem (vs dirty rollers).  After a lot of time in Chat with HP, I finally gave and clean the paper feed rollers tray and power (so far) problems disappeared.  Cleaning was not as strong an I thought it might be.  I used a damp lint and feel achieved in forward into the cavity of the paper tray and wiped the rolls through several rounds of each.  I really hope that this is the solution because it is a very nice printer otherwise.

• Can not use msconfig to Windows 7, download 2 dll error messages run at startup. C:\Progra~3\7ber.dat.

  I get 2 dll error messages run at startup. C:\Progra~3\7ber.dat. I'm going to the Start button to run msconfig & get the same message. Thank you.

  I could not use msconfig in Start button so I opened the window run and used there. Are went to msconfig tab and disabled startup. Now it's working.

• HP Officejet Pro 8100: HP Officejet 8100 N811a - network connection is not possible

  Hello community,

  I have a pretty standard network with 3 points of access, WPA - PSK authentication, TKIP/AES encryption, running on channels 1-11. I made the MAC filtering is off and DHCP is on.

  The printer connects to the network, or via the software of HP Doc or the EWS settings.

  It's however possible to connect the city nearby networks so I must be overlooking something.

  After that under the HP Doc and he's trying to set up the printer I just get an exemption from the unknown error.

  The printer prints fine when connected by cable.

  The Network Configuration after the eroor HP Doc said

  Wireless on : Pass
  Wireless Working : Pass
  
  Connected : Not Run
  
  Network Name Found : Pass
  
  Printer Settings Consistent : Not Run
  No Filtering : Not Run
  Channel : Not Run
  Security : FAIL
  
  And in the Configuration it lists the SSID but IP Adress states : not applicable
  

  Ideas?

  Hi @NK10,

  Welcome to the Forums of HP Support!

  I see that you are unable to connect wirelessly with your HP Officejet Pro 8100 printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you mentioned that you have "3 APs, authentication WPA - PSK, AES/TKIP encryption, running on channels 1-11 I made sure MAC filtering is off and DHCP is on. »

  First, I'll assume means AP access point.

  • WPA2-PSK (TKIP) WPA2-PSK (AES) and WPA2-PSK (TKIP/AES) are all different encryption options. Which one do you use?
  • Do not use more than one type of encryption at the same time, what access points help.
  • The router is connected to one channel at a time, not 1 to 11. What channel are you on?
  • DHCP should only be enabled on the router and disabled on each access point.

  Looks like the access points are configured incorrectly. They should have the same type of encryption and be on the same channel as the router. If the printer works well on the wired connection the wireless network configuration is causing a conflict.

  Tips for a successful wireless connection:

  • Using a unique network name (SSID).
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  For troubleshooting purposes, follow these steps:

  1. Disable all access points.
  2. Connect the printer to the router wirelessly.
  3. Test print.

  If the printer works fine wireless connected access points, you must reconfigure the access points correctly. HP does not support the networks with access point, additional router or switch, etc. The complexity of the configuration.

  For more information, see print wireless Center.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro 8100: install officejet pro8100

  I try to install the software for this printer on a Vista Home Premium 64 bit computer.  The installation fails saying it cannot install the file HPDiscoPM5B12.DLL.  It sends the error to HP, but comes up saying that it does not find a solution.  No idea how to get the full software installation package?

  ERROR MESSAGE:

  3 = CopyFile (CBC: c8100\Bin\\HPDiscoPM5B12.DLL Files\HP\HP\HPOfficejt Pro rogram Dst: c:\Windows\system32\HPDiscoPM5B12.DLL)

  Thank you!

  Chuck

  This printer is a HP replacement for a Pro Offcejet 8000 defective.  I have the DVD of the old printer and he ran with it.  Apparntly, he had the OfficeJet Pro 8100 on it software and installed it without any error message.  So far, it seems to work well.  I have to think that there is something wrong with the 8100 to the HP Web site software.

• Change the SSID on a HP OfficeJet Pro 8100

  Hello world

  I've updated my router from WEP to WPA2 wireless and may not know how to upgrade the SSID on the OfficeJet Pro 8100.  I've updated my consoles of mobile games, televisions, thermostat etc to the new SSID and password.

  I don't have the installation CD.  I have the USB cable.  I run the HP 5.19.2 utility.

  When to connect the printer to the computer with the USB, I access the HP utility, click 'Network settings' to the program extracts information and provides the following error msg:

  "The task of network settings is not currently available.  Please make sure that the device is connected to a network. »

  Well, I know it is not connected to the network, I just need the screen to enter the new SSID and password.

  Other information that might be useful:

  Operating system: OS x Version 10.9.1

  Model: Officejet Pro 8100 N811a

  Service ID: 23267

  FW version: TSP1FN1148IR

  Driver version: HP inkjet 3 pilot 3.3.3

  Thanks in advance for any help you can provide.

  How I finally got to work on a Mac running 10.9:

  1 connected via USB to a Mac

  2. system preferences > Print & Fax > search for the printer in the list on the left > use the button + to add the printer if it is not there

  3. install an ethernet cable from the printer to the Mac even

  4. with the printer selected in system preferences, click Options & supplies

  5. click on the utility tab at the top

  6. click the button Open Printer Utility

  7. all the settings > network settings > Hello parameters

  8 select Hello if it is not enabled, click the URL next to your device to the URL address to access:

  9. to the web page for the URL, click on the network tab

  10. click on wireless configuration wizard, click OK, ignore SSL warnings, enter your printer admin password if you set one

  11 to run the Wireless Setup Wizard

• duplex unit is no longer an option in the print screen - hp officejet pro 8100

  I have a HP Officejet Pro 8100 that came with a duplexer. Until today, the duplexer has worked. Technically, I don't know that it does not work. But when I open the print screen in open office, adobe or any other program, it is no longer gives me the option to print double-sided. I have no idea what to do and there are no tutorials that explain how to fix this. Any help is appreciated.

  Discovered after trying to reinstall the printer software that because my updated OS updated to 8.1 of Windows 7, my printer is no longer compatible with my computer. Is - this ridiculous or what? I have messaged HP, so I have no guarantee so I don't know that they will refuse any product support. It's okay, if need be I will take my business elsewhere. I would not have to pay for support on a product that they have outdated on purpose. Companies used to be a quality product. Oh how times have changed. It is an expensive paper weight.

  @KKissmann, welcome to the community of HP

  I read your post and I would try to help. Your Officejet Pro 8100 is compatible with Windows 8.1, so we should be able to get through this problem. Maybe you've tried running the installation from the CD, which is perhaps not a Windows 8.1 driver loaded, what can happen and you need to download the driver online instead. We will eventually get there

  Please click here to access the full functionality of driver and software for Windows 8.1:

  Driver and complete software of HP Officejet Pro features

  Once the download is complete, run through the installation until it is completely finished. Subsequently, test print and check if you have the option to print double-sided.

  Let me know if you encounter any problems!

  Happy Monday

• OfficeJet Pro 8100 - new router - can't connect wireless

  Have an Officejet Pro 8100

  Has been configured on my home network for the USB connection or wireless printing before

  Old router has not installed this new router

  Cannot be configured for access through a new wireless router

  * When you run the installation of the printer asks to plug a USB cable - I plug in - then it passes to the ask for password wireless but then say errors

  "To configure the network settings for the selected device, please temporarily connect via USB. The device can be disconnected from the USB, once the network settings are transferred. »

  BUT the USB IS plugged

  Have tried completely uninstalling printer, software, drivers, etc and then make complete re-install-without success

  Router is an ASUS RT-N66U

  Wondering if there is a way to do a complete factory reset to clear the memory of the printers I've tried unplugging, wait 5 minutes and then plug it to a real reset without success complete.

  All of the suggestions that I am at a loss.

  Hi bketchy,

  This new router has two differnet built-in radio. You must ensure that you connect to the printer the correct SSID name for 2.4 GHZ radio. If you have both the 2.4 and 5.0 GHZ configured with the same SSID, you chnange the SSIP mame which should allow you to connect to the printer. Follow the steps outlined in the document below.

  Unable to connect to a wireless network

• OfficeJet Pro 8100: Utilities application does not start, Officejet Pro 8100

  The printer is working fine, except for the occasional streaks. The problem is when I try to access the cleaning utilities, etc.. When I try to open the app, I see a flash hourglass for a second or two, and it goes no further. I don't see any new task in the windows Task Manager. I completely uninstalled the printer and reinstalled, no luck. Any thoughts?

  Hi @dtbradio,

  Thank you for joining the HP Forums!

  I understand that the demand for public services will not start HP Officejet pro 8100 on Microsoft Windows 7. I'm happy to help you!

  Please first try our HP print and Scan Doctorand let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• Can I print in black and white with an empty cartridge on a printer HP Officejet Pro 8100?

  Only the cyan cartridge is empty, all the other 3 cartridges are fine. I ordered the cartridge cyan online but I need to print important documents today. The power button blinks when I try to print.

  I do not understand, black and white must not use a color cartridge to print.

  Is there something so I can print before receiving the cyan cartridge?

  The printer Officejet Pro 8100 has the same print mechanism like its counterpart of all-in-One Officejet Pro 8600.  This printer has a print head mechanism that contains 4 individual cartridges: CMYK (cyan, magenta, yellow, black).

  It will replace the cartridge if the unit provides a message from one of the colors being empty, until the unit will resume printing.  This is a retention mechanism to avoid the product from damage.  I hope this helps.