OfficeJet Pro 8210: Officejet Pro 8210 will not print - need to finish the setup message

Similar Questions

• OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

  I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

  Hi @thrandall,

  Thanks for getting back to me.

  My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

  Have you tried these steps in my previous post?

• Printe will not print. Says that 'the printer door is open', but no door is open

  Printe will not print.  Says that 'the printer door is open', but no door is open

  Hi ElliotBrahms,

  1. What is the brand and model of the printer?
  2. what operating system is installed on the computer?
  3. you have made no changes to the computer before the broadcast took place?
  4. when exactly you get this error message?
  5. What is the exact error message you get?

  Method 1
  Try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2
  Try the steps from the following link:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• HP Deskjet F2210 printer will not print my documents with the exception of my e-mail highlighted

  HP Deskjet F2210 printer will not print my documents with the exception of my e-mail address highlighted who is on the document, it is not cartrages, as it will print one page black and multicolor of the internet. Help, please.

  If you found problems with print quality with the only printer without printing from the computer, then it is a hardware problem.

  You may need to contact HP (1800-474-6836) support. Looks like a print head may be bad or needs to be cleaned manually. I don't think that this printer has a detachable printhead to clean manually.

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• HP officejet pro k550 will not print a test page using the printer buttons.

  How to print a test page to make sure that this printer is still operational?

  I tried all the instructions release possible jams printer, deleted and reinserted the printheads and clean the rollers.  When you press the keys on the front of the printer, it will not print a test page.  and no led error display.

  The printer has been connected to another computer and stopped working last summer.  The printer does not respond to commands from the computer, nor would he respond to the keys on the front of the printer itself.  I can get the printhead to move using the controls on the front of the printer, however.  The printer is not currently connected to any computer and the nearest computer has not installed the appropriate drivers.  Initially the printer is connected to a desktop computer Dell Windows XP (sp 3).

  Here's how to print a self-test of the control panel page.

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• HPofficejet pro 8000 will not print photos

  My printer will not print jpeg or tiff files, when I try deals just to save it to my documents. It will print other docs okay. such as word or e-mails

  Thanks for the reply.  I did try the print and scan doctor and any other help desk services, that I could find!  All said that my printer was ok my OS is windows7 32 bit.

  I've now solved!  I tried to print on windows photo gallery and I found that I had somehow "print to file" selected.  Maybe it will help other users who may not print photos.

  Concerning

• HP Officejet Pro 8620: HP Officejet Pro 8620Print will not print oversized envelopes

  I thought I had followed the instructions allegedly simple re plug my new printer HP Officejet Pro 8620 in turn. Something to do with the connection via ethernet? I plugged it with a money USB cord.

  Then, when I tried to print something printable HP, the site does not recognize or find my printer.

  I also can't seem to print envelopes of various sizes. The instructions to keep your printer drivers on the evolution of the saying.

  Can you please help? The saleswoman of Staples said it would be easy. HAH!

  Thank you for your time and let me ride my rants. I enjoy your site and it.

  Hello

  HP pads are only available in the network connection, and no USB connection.

  To connect the printer to the network yoru connect it to your router wirelessly or through an Ethernet cable to any of the router LAN port, then you can activate printable HP.

  You must reconfigure the printer by opening the HP Officejet Pro 8620 software, and then click the utilities tab.

  Click Printer Setup and software and follow the steps to connect to a network printer.

  To set a custom size support size envelope follow these steps to configure the size within the confiugration forms your system, then the size configured support will be available in the print driver.

  You can follow these steps to set a medium size custo:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5367613/document/c03890386/

  Note that the printer supports a size order of 76 to 216 mm (3.0 to 8.5 inches) wide and 127 to 356 mm (5.0 to 14.0 inches) long. any value higher or lower is not supported and is not listed by the print driver.

  Shlomi

• Now my HP Officejet Pro more will not print Photos or anything else!

  Here I am once more.  I finally solved the problem that I had been downloading the software for my HP printer after that I downloaded Windows 10.  I could not download any software without getting an error message 'download cancelled '.  I was able to print pictures and letters typed with WordPerfect X 6.  I'm embarrassed to say that I accidentally fell into the solution and now I can scan, send faxes again.  Yay!  Problem is NOW, I'm more able to print photos, or anything else!  I go through all the motions and send the message to the printer to print, but nothing happens.  I have already run the hppiw.exe and configure the printer.  When I try to run the HPPSdr.exe, he unzips the file, the printer appears as "installed" and click on the 'Next', I get a screen with 3 different ways to connect the printer to my computer - I choose USB because it'S the way I was connected.  Then I get a message telling me to do that my printer is on (it is)!  and try a different USB port (I have) or try another USB cable (I HAVE!)  OK, so FINALLY I get to the point where I am able to print on a HP Officejet Pro 8600 N911g series Print Page of Diagnostic quality, AND DOES IT!    But I also know there is a problem with the software and I need to uninstall and click the Support link and the Driver to download new software.  But when I click on the link, I'm told I'm not connected to the internet - here we are again.  I'm exhausted.  I am 65 years old and I've been at this for 96 hours.  I've corrected the problems of scanning, but now I can't print while yesterday I was able to do it!   Arrrrggggghhhhhh.

  Can someone tell me why I get the message 'not connected' when in fact I AM connected to the internet?  sigh/smh

  Hi @Galego,

  Welcome to the HP Forums!

  I see that you can not print with your HP Officejet Pro 8600, on 10 of Windows, and I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Then, run the HP print and Scan Doctor to verify that everything works.

  I hope these steps help!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP officejet pro 6830: will not print in color

  I just bought an officejet pro 6830 e al. in a printer and I can't seem to print in color. I can copy in color by manually typing the colors and all my test prints out ok too. I even tried to clean the print head.  My operating system is a Mac OS X 10.11 El capitan. Can anyone help with this problem.

  @mzacc, welcome in the community of HP,

  I saw your post about how you are unable to print in color, to your Officejet 6830 and I wanted to share my own suggestions with you. See the link and the steps below and judge. You should be able to print in color later.

  • Click on this link and try all the steps: color or black cartridge isn't printing
  • Here are some other suggestions, I have to try the Mac:
  1. Reset the printing system
  2. Restart the Mac.
  3. Download and install the complete driver: e-all-in-one HP Officejet Pro 6830 Printer series full feature software and drivers
  4. In addition, to download this driver: HP v3.1 for OS X printer drivers

  Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

  Have a nice day

• OfficeJet Pro 8620 will not print duplex

  I use an iMac and OS X v10.10. I can print duplex when I'm on the web using Safari, but when I'm offline and want to print from Acrobat, Word, or Excel, I can't - there is no option for double-sided printing in the print dialog box. What gives?

  Hello
  Please follow the steps below to automatically print double-sided print jobs:

  Open the file used to print, and then click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized. Click Show details to see all the available parameters.

  Open Adobe Reader print dialog box, then click the printer... button. the complete system shown print screen will allow other parameters such as printing duplex, bureau skip this step...

  Click on the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  Select layout from the drop-down.

  Set the duplex option as the binding edge (Portrait) Long or short edge (landscape) bond.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Kind regards
  Shlomi

• OfficeJet J3680, suddenly will not print. Blinking orange exclamation point, screen reads "cartridge error".

  Suddenly, my Officejet J3680 will not be printed.  Blinking orange exclamation point, screen reads "cartridge error".
  No troubleshooting of any help.  What should I do?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet J3680 - drivers - the value for your version of Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3441026&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet J3680 - troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3441026&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OfficeJet 8500 Prime will not connect to wireless for the scanning of email

  HP Officejet 8500 first.

  Western Digital N900 router

  Printer is connected to my home wireless network and wireless to my HP Pavilion laptop (which is in the same room).

  I felt for a few years and I do a LOT of scans to myself on my e-mail and rarely have problems.

  About a month ago, I got a new wireless router, and the problems started.

  I had the wireless configuration.  Printer connect to my home wireless.

  If I try to scan to e-mail, I get a message "unable to connect to the server. Check the address and the name of the server.

  I can print from my laptop very well (wireless)

  I have run the wireless network test report (which incidentially, does NOT use the default tray as specified in default values, so I have to remove the media in a status bar and replace them with paper to make turn this test).

  All passes.

  very good signal strength.

  no other network with the same ssid

  Wireless networkes detected: 3

  Channel 11

  everything looks great.

  I connect to my router (from my wireless laptop).

  My router says that the printer is on the network.

  I turned off/power on router to reset.

  I tried the reset network default printer and returning via the wireless Assistant.

  I tried another wireless (5g below)

  I got the preferred wireless network name and password several times.

  I turned the printer deactivation / activation.

  The SSID signal is using 2.4 Ghz (802.11 B + g + n) 20 / 40 mhz channel (auto) AND I ALSO tried with channel (11) just

  The router includes a 5 GHz (802.11 a + n), but the printer never sees this SSID, and tried manually enter the name and password as well.

  I get the same error every time.

  Sounds like you arehaving problems with scanning to email. Can you tell me first if you have tried all the other email accounts other than the one you are using. According to the security on the SMTP servers for the customer, you will have to go and try another account. I suggest to make a Gmail account and attempt to put in place the new feature.

  I would like to know how this happens, and I'll get back right with you!

  -Spencer

  PS I hope you had a great weekend and had a wonderful day!

• HP Officejet 6700 Premium will not print in color from Word or E-mail but copies in color

  How can I get my HP Officejet 6700 Premium to print in color from Microsoft Word or email.  It copies in color.

  Thank you.

  I would make sure that black ink is not enabled on your computer.

  1. Select Start menu
  2. go into devices and printers.
  3. right click on the printer, select printing preferences
  4. in the lower right corner, select Advanced
  5. then according to the characteristics of the printer print in grayscale as a drop-down list will appear select off if its turned on.

  Let me know how it goes.