OfficeJet Pro 8500 A909n: Fax e-mail digital configuration, but always print incoming faxes

Similar Questions

• HP Officejet Pro 8500 best has come out very low but the printer works fine.

  I was always able to make great copies.  The quality of the document that I copy is excellent and I've copied before.  Now everything I copy is very low and cannot be read.  The printer works without any problem.

  Hey 1265yankee,

  I see that you have a problem of quality of the copy with your Officejet Pro 8500 (A910) a model-all-in-one.  Have you tried to reset the printer hard and ensured that the device is connected to a wall outlet directly?

  • Unplug the printer while on
  • Unplug the other end of the power cord from the wall jack directly
  • Wait 30 to 60 seconds
  • Plug the unit back to

  Also, take a look at the steps in the document found here.  The document is not directly applicable in the present case, but the steps are the same for your question.

  Let me know how it goes.  If this does not solve your problem, then I have the steps to perform a factory reset on this product to see if an internal reset will be able to get the device to work as expected.

• HP Officejet Pro 8500 A909n: HP Officejet Pro 8500 A909n - heads will not snap.

  HP Officejet Pro 8500 A909n - heads don't align.

  -replace the heads-get green light in the HP utility on both

  -replace the ink

  -reset printer.

  He's still not the alignment - mires look OK (2 and 3) with the exception of the verticle (focal 1) lines

  second line 3 game are a little out of the middle (vertical)

  Anything else I can try?

  Hey @bgflyer,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the alignment of your Officejet 8500 first all-in-One printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve problems of alignment with your printer.

  If after the above, that you can't always line up, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8500 A909n

  I have a HP Officejet Pro 8500 A909n I've had for a while.  Recently it from printing in pink even though my settings was to black ink only.  Then he stopped and started printing in black.  Want to know what caused this.

  Also, I wanted to know if in order to print in black so the color cartridges have ink inside.  I read somewhere that the carridges themselves must be in place, but he said not that the color cartridges must have ink inside.  I do not use color and don't want to buy new cartridges of color if I have to.

  Would like to help on these 2 points.  They can even be linked to the problem.

  Thank you.

  Hello @JCooper615!

  Thanks for posting on the HP Forums!

  You mentioned that the printer printed pink when you had selected only black print cartridge.  I'm not exactly sure what caused this, but I can provide a few suggestions that can prevent it from happening again.

  Its possible to print to the printer head needs to be cleaned.  To perform a printhead, cleaning the printer just tap the "setup" on the screen of the printer.  Once your menu setup press "Tools", and then press "clean printhead".  The printer will run the print head cleaning and print a report.

  Another thing that I suggest is to remove the printheads and clean them manually.  Sometimes the ink can fog up on the copper of the print head contacts.  This can cause a bad electrical contact and may result in poor print quality.  For instructions on how to clean the printhead manually, click on: http://support.hp.com/us-en/document/c01609042

  The printer takes 4 cartridges and 2 print heads.  The print heads are making to put ink on the page and they need to be replaced at any time.  If the problem persists, you may need to install a new print head.

  You also want to confirm if the printer needs color cartridges to print.  The printer requires all of the ink must be installed to be able to print.  If a color cartridge is empty, then the printer displays a message that it is unloaded.  The message will not disappear until this new cartridge is installed and will prevent you from printing.  When printing in black the printer still uses a small amount of color.  This is to ensure to don't clog the tubes of ink and the print heads do not dry out a lack of use.

  Some printers cartridges that have integrated print heads.  Some printers as the ENVY 5530 and Officejet 4630 do not require the color cartridge too be installed to be able to print.  They can print mode single cartridge.  So if you exhaust your colors you can just take it off and continue to print in black and white.

  Thanks again for the display on the HP Forums!

  Enjoy your day!

• OfficeJet Pro 8500 A909n Firmware update froze

  I was trying to update my firmware on my HP Officejet Pro 8500 A909n. During installation, the installation froze. I was connected via my USB to the printer. There was a progress screen on the LCD of the printer that shows the numbers 1-5 with small squares under each of the numbers that were either low-light or highlight according to what stage or the status of the update on that. There was also a progress under the numbers bar. The update in the impasse with the square under the number four was highlighted and bar ceased under the number one growth. After 3.5 to 4 hours waiting for the update to complete, I had to kill the process of updating. Try the update again the model search engine can not find my printer and the printer lcd displays a circle with a helping hand to 12:00 and below is a string "B8084644". I'm stuck. Have mercy on my soul... to help

  Sent you a private message.

• OfficeJet Pro 8500 a Fax Copier Scanner has streaks dark on most of the page but exit the printer seems

  HP OfficeJet Pro 8500
  Series # {information}

  CM755A model

  The printer prints using the printer and the output looks fine. However, when you use scan, copy or fax characteristic of the printer, there is gray stripes dark page that covers almost the entire page. Have tried resetting, cleaning all areas and still have the problem. What is the problem? Is there a diagnosis of the printer that I could run? No error code will appear. Any guidance is appreciated - thank you!

  Looking at your attachment, the unit seems to have a bad scanner and must be replaced. If your in the United States, contact the HP support @ 1800-474-6836 to see what alternative options are available

• HP Officejet Pro 8500 A909a series e-mail address to print from an ipad

  Where can I find the e-mail address for my HP Officejet Pro 8500 A909a series so I can use my new HP app on my ipad to my ipad on my printer printing?

  Tina

  The printer Officejet 8500 A909 series does not work with ePrint. You can use the House ePrint and Biz app for Android and Semien devices or application ePrint for iOS devices. However, you cannot use ePrint itself. Sorry for the confusion. Here are links to the ePrint and FAQ Mobile applications compatibility list. Hope that helps.

  Supported printers the HP ePrint Mobile App or HP ePrint home & Biz:
  http://goo.GL/sVIG8

  HP ePrint Mobile Apps FAQ:
  http://goo.GL/33WFq

• HP Officejet Pro 8500 A909n - Windows 7 Driver needed!

  Hello

  I just bought HP Officejet Pro 8500 A909, and he does it not install on my Windows 7 RC1 installation. An updated driver is needed.

  I wonder if there is no known workaround solution? I tried compatibility mode and run as admin, comes to about 90% ish and - error.

  How can I be sure that HP will make a Windows 7 driver for this model, if I need to return it as soon as POSSIBLE.

  Thank you

  Message edited by MiahX on 07/06/2009 10:20

  @ellirdad. I'm 100% agree with you want HP to solve the driver problem. It's quite maddening.

  If you download and use the basic driverset, it works very well (I use Windows 7 RC1 x 64).  This is after forcing it to run in compatibility mode, of course. You can scan, fax, etc. Works very well.

  I tried to install the driverset full and also had the problem where it would freeze at 96% and eventually times out. I was bored and deicided to make an investigation of the sound problem have is a file named flash9f.ocx. Apparently, he's trying to 'register' this file with Windows and she fails. I have not dug too deep, but I tried to download and manually save the flash9f.ocf and there still no, then who knows. I hope that HP will get on the ball and give us some Windows 7 drivers soon.

  Message edited by Method2Madness on 08/19/2009 10:53

• OfficeJet Pro 8500 Wireless: Hard reset after automatically adjustments between each printed page?

  I have a HP Officejet Pro 8500 Wireless, mainly connected with WiFi for PC Win7.

  The problem is that the printer automatically adjusts between each printed page! How can I fix it? Is this possible with a hard reset?

  Thank you for your answer!

  I think that the cable of the red ink has been blocked, but it's fixed now.

• OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

  I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

  I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

  Help, please.

  Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  

• OfficeJet Pro 8500 A909a 'Fax to PC' is on, but still prints faxes automatically when received

  Had a problem with the reception of faxes and reset the machine.  Since then I can not fax just save to the computer only.  It will save the fax to your computer, but it also prints when it is received.  I use XP Pro on a desktop computer.  I don't get any errors.

  Hi jb9522,

  Recheck your settings for the digital facsimile of the fax machine basic configuration of the control panel and check out the following document below.

  http://support.HP.com/us-en/document/c01619066

• HP OfficeJet Pro 8500 A909N: OfficeJet Pro 8500 power Module

  The printer does not turn on, the power adapter light flashes on and outside, light sweep under the glass of the scanner blinks in sync with the light adapter and the power button does not work. When the power cord is disconnected from the printer, but remains connected to the AC, the light on the adapter continues to pulse.  I was wondering if this indicates a failure of the power adapter or a more serious problem with the printer itself.

  Skulker wrote:

  The link you provided describes the problem experienced, but unfortunately the solution wasn't able to resolve the problem. When the module is plugged in AC, the light flashes on and off for the module seems to be defective, perhaps victim of a power surge or slump.  Thanks for your help.

  OK, so change the power adapter.

• HP OFFICEJET PRO 8500 a: fax without a landline

  Hello

  I ask this once again because I received an email from someone who says that there is a private message for me on this subject, but I could not find.

  Should I have a land line to send faxex with this printer.  I can't set it up without saying connect to landline.

  I think there's a been since I have a WIFI.

  Thank you

  Yes, you need a land line.

• OfficeJet Pro 8500 has more: document scanning

  Several pages to the computer and save it as a file, but now he won't, until Apple upgrades my Officejet Pro 8500 has more opportunity to scan the whole of a scan of the page at a time.

  How to scan a document of several pages under the name of a file?

  Hi @Pinnacleport,

  I read your post and to see that since the upgrade to El Capitan, you are no longer able to scan several copies of a file. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I checked the site and the drivers are installed by the Mac drivers preinstalled. HP printers - installing a printer driver Mac using Apple Software Update.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet Pro 8500 has more)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  What application are you using to scan with?

  The only way you can save several pages in a single file is in PDF format. JPEG and other formats will save multiple documents as separate pages. In the printing and scanning window, select PDF and check combine in one document below.

  I hope this helps. If there is anything else I can help you, let me know. Thank you.

• Assistant printer HP - Officejet Pro 8500 has

  I have a HP Officejet Pro 8500 a A190.  It is installed as a printer of cable network and I have the HP printer software installed on two different computers on the network.  Recently, when I open the uiltity of the printer, it seems to have changed.  I have 4 options to choose (Assistant to HP printer, see what's printing, set preferences, and customize your printer).  When I opened the consul of the printer, it used to take me directly in the wizard HP printer utility.   This in itself and is not a problem.

  The problem is that when I try to open the utility Wizard HP printer, nothing happens.    The Assistant HP printer utility allows me to perform maintenance on the printer (IE clean print heads), check the cartridge ink levels, scan and much more.  I opened the utility Wizard HP Print of computers.  I would say that something has changed in the last week or two.   This is impacting on both computers.  I even uninstalled all HP computers printer software and reinstalled.  Nothing has changed.

  Any thoughts?

  Hello

  Try to remove the software completely by clicking on start > all programs > HP > HP Officejet Pro 8500 A910 and follow the uninstall option.

  Then go to control Panl > programs and features > uninstall a program and remove reminders of the software (HP Customer Participation, Readi Iris OCR, etc.).

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109378-2&cc=us&DLC=en&LC=en...

  Then look for any change when access to the printing software.

  Please let me know if this is useful,

  Shlomi