OfficeJet Pro 8500 depleted a color ink cartridges - printer will print not except if replaced

Similar Questions

• OfficeJet pro 8500 a: records being cluttered when printing

  the printer was working a few months when I printed something. and today I had to print something for the first time in months and paper ceases to be cluttered.

  and when I try the align print heads, it not aligned correctly and right side rear of the document that has been printed keep getting scrumbled for some reason any.

  can someone help me with this?

  HI @miniminS,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you used an Officejet Pro 8500 HP e-all-in-one printer with a Windows 10 computer but it is now blocking paper. I would like to help with that.

  Here is the document of support with this problem - a "paper jam" message for HP Officejet Pro 8500 (A910) a e-all-in-one printer series.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.

   

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• HP Officejet Pro 8500 A910: why can I only print in black when a color cartridge is empty?

  my yellow ink is empty.  I have a new 8610 to install but to print in black only to use this ink.

  The Officejet Pro 8500 (like the Officejet Pro 8610) has separate printheads and ink supplies, with "plumbing" to connect.  You have color ink available to keep the print head and plumbing butcher, even if you are printing black only (and in your case you don't care is if the color print heads clogged).

  See here for more information on how the ink is used.  Officejet Pro printers are IIC in the terminology of this document.

• HP Officejet Pro 8500 has more stalls now displaying "printing".

  Hi, in the Office I work in that we have 2 HP Officejet Pro 8500 A910 Series. It is on a network with 3 PCs running WIndows 7 and the other is connected via wifi to a PC that is also running Windows 7.

  The problem is that the printer is on a network often stalls displaying "print now" on the screen of the printer. The only way to continue to print is to turn off the computer, and then on again once, wait that he do his cleaning etc. then press print. It's normally ok for this work print, but as soon as other print jobs are added must be reset to zero and the cycle repeats endlesly all day. Until recently the other printer connected via wifi was working fine but now that is also exactly the same as described above.

  Recently, I searched the forums and have discovered that it is a common problem with this type of printer.

  I did the resets partial or total of the two printers without result.

  Bothe printers currently use the firmware version: LRP1FN1126AR, which I believe is the latest firmware.

  Please someebody can explain how to make these printers are working properly? Thank you very much

  Opening and closing the door of cartrdge seem to generate an interrupt that resets the connection and unlocks the pending print job.

  While not solving the underlying abnormality, it is much faster and esier on you and the printer.

• OfficeJet Pro 8600 always in color ink

  I have 4 computers, printing on this printer and I put printing preferences on all levels of grey: black ink only, yet I am still uses ink of color for a reason any.  All faxes and copies that are made on the machine are in BLACK.  Please help me understand this.  Y at - it a setting I'm missing?

  There are a few things to check.  Some ink will be used to keep the "plumbing" and clear print heads.  If you never run cleaning cycles (in the front panel or computer palette) ink will use black and all colors.  If the printer is off of an external switch that will serve the most ink - the printer must always be connected to a live outlet.  Finally, when you automatically print duplex some color ink will be used on the first page to set the ink more quickly so that the ink will not smear when the page is pulled back into the printer.

  The document described here how the ink is used.  In the terminology of this document the 8600 Officejet Pro is an IIC printer.

• HP Officejet Pro 8500 won't recognize change cartridge

  Replaced by just bought new (out-of-the-box) Cyan XL requested ink cartridge but always error message to replace the cartridge.  Message will not change any I've tried:

  printer a. be able to turn off/on several times.

  b. deleted/returned all four cartridges

  For everyone who has this problem with the rejection of 8500 ink cartridges known good.  I finally found a solution from a third party.

  (1) remove the ink cartridge the printer is rejected.  Look inside the printer ink cartridge and see a small rectangular plastic button to halfway between the ink tube and the drive of chips.  This sensor plastic is causing the printer to reject the cartridge.

  (2) look at the cartridge to the side coupling of the plastic button and a bulb rubber at the end of the ink cartridge.  The pressure in this PEAR rubber is supposed to press the plastic button in the printer. But for various reasons, it does not define the sensor to 'off '.

  (3) to fix the problem, place a small piece of rigid Ribbon on the end of the ink cartridge to cover rubber pear.  DO NOT cover the ink tube or the well sensor chip.  The Ribbon should be about three inches long and ¾ in. wide.  Use the stiff Ribbon and tape.  Not flexible table.  The goal is that the Ribbon increase the pressure of the PEAR rubber is supposed to confer on the probe plastic button in the printer.

  (4) replace the ink cartridge in the printer. Problem resolved 98% of the time.  If this is not the case, there is something wrong with the sensor inside the printer switch and this solution will not work.

  (5) good luck.  See you soon!

• Set up printer M451 to deplete its color ink cartridges

  My M451 color laser printer is currently set to force printing in black and white when one of its color toner cartridges falls to a very low level.  Could someone tell me how to put in place to keep just print in color?  This will allow me to decide when the color print quality gets bad enough that I want to change the cartridge.

  The other day someone here very usefully showed me how to do this with my M475, and hope for a repeat of this notice for the M451.

  Any thoughts appreciated.  Thanks in advance!

  -Gary

  Looking for the control panel submenu: System Setup-online power settings-online black cartridge-online very low setting

• I have a HP officejet Pro 8500 a Premium all-in-one. It works great except for scanning.

  When I scan the docs come out with several MB in size.  I reduced the resolution of 300 DPI to 200 dpi and even smaller, but the docs are still very large.  I'm missing something here on the possibility to scan to a more normal size.  I also have a HP officejet 8500 which is a bit slower, but if I scan the same docs to 300 it might be 1 meg where the other is 10-12 megs.  Can help.  I could find no answer on the HP site.  Thank you.

  Hello DwaineHl

  Go to advanced... and put the file to the smallest size. You can refer to the image below.

  Also check the output Type. Black and white and grayscale will lower color.

  

• HP OFFICEJET PRO 8500 (CB022A) / Windows Vista 32 bit (printer appears in gibberish)

  I recently replcaed the this printer's magenta ink tank, but the screen has refused to accept it was sufficient ink in there. So I did a system reset, I thought. {The content removed}  However, this resulted in my words of choice display option is most read in English. Get the number of the option but not the word assigned with it. It literally reads like gibberish. I have a suspicion that the printer think that his memory is not for a tawianese or Japanese user but the police these languages stored inside.

  {The content removed} I got those on this forum site. While I got the #/ 3 (maybe answer.com, I think). I can probably take some pictures of the display with my iPhone and download them.

  Also when the printer prints a page additonal fate with a test pattern part when I print a page of a document is saved. My PC can not get the printer to scan more of Adobe Acrobat Pro and none of the software I have driver downloads HP can detect the printer or diagnose the problem of printers.

  I only resorted to this forum because I'm stuck.

  We do not have HP repair services, but you may be able to locate a repair shop that can help. Maybe a small possibility exists and believe me I hesitate to inform people that it would be in their best interest to get a new unit, but in this case, it's really my recommendation. At the time where efforts have been spent to find a way to get this device (not to mention the monetary costs) it would be simpler and more efficient to get a unit that could cost less than the price of the repairs.

  Have a great day!

• How can I connect my HP Officejet Pro 8500 Wireless to my ipad to print wireless

  I am trying to connect my ipad to the printer above and it tells me No Airprint Printers Found.  Can someone tell me how to get these two connected items.  Thank you very much

  Use it wireless setting in the iPad to connect to your printer. This will be an ad hoc connection.

  You may not be connected to your wireless router and the printer at the same time so unplug no matter what router you are connect to before you do...

  Once you have done this, you will be able to print documents and emails fror your iPad to your HP Offijet 8500 printer.

  If you want to use ePrint (your printer is capable of printing), follow the instructions in this document from HP web.

  Here is a link to the web portal for your printer support.

• HP Officejet Pro 8500 A909 all: sorftware HP installation program will not stop running

  I recently uninstalled the software and drivers for my printer as suggested here.  I installed the drivers and software the latest complete features of the HP customer service.  Now the program will not stop running even after it has completely installed. The disc in the picture will not stop running and the window does not close.

  Hey @David146,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the judgment of some installation of HP software to run on your PC of Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your PC, press CTRL, ALT and DEL keys at the same time.
  2. Click Start Task Manager.
  3. Select the HP software from the list.
  4. Click end task.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8500 has e-all-in-one printer A910a given to nine (Fax phone part short circuit)

  My phone service was interrupted (no dial tone) and I called my phone provider about the issue.  The dealer has diagnosed the problem and was told that the problem was with my printer. He tested the wiring and found that portion of phone of the printer has been bypass, pick up the phone line and do not hang up, which eliminated my phone service.  I had to unplug the printer telephone wire and wall split decision.  I now have the phone service and I can use the other features of my printer, but I can not use the fax feature.  Please advise... MSROZZIE

  Hi msrozzie,

  Have you tried to contact Verizon to check how they suggest you connect all the devices? One of your previous posts said you would contact them. I wonder what they suggest.

• : HP Officejet Pro 8500 A909g Pr: problem installing drivers printer Officejet Pro 8500 A909g

  He is a former printer who has worked for years, but whenever I attach a printer Epson Photo to my PC, use it, unplug it, my HP printer fails. I've always been able to reinstall and it works very well. This time it somehow uninstalled the drivers and when I try to install from the CD of HP, he will not reinstall. I get the yellow triangle on Device Manager and the devices and printers Gino PC. When the installation CD fails, I get a message problem found with your network problem may existwith network printer function. Try to fix the problem then clickretry or click next to continue.

  Rediscovery of detected printer problem. Your PC may not be mean track on the line of your printer status changes.

  If you use firewall software, check port427 UPD is unblocked from your printer to 192.168.1.5 to your pc. To solve this problem try to power your printer market.

  Powerinf the printer does nothing. I have disabled the firewall with no result. The UPD port, I don't know what to do. I tried all the fixes from HP and MS and they show the printer but no miracle car.  Does anyone have any ideas what to do next?

  Thank you E - roq,

  I tried everything you mentionrd sxcept msconfig. It did the trick. My printer prints and reset msconfig... One more question if I can - my printer will work with Windows 10 or do I have to buy a new 8630?