OfficeJet pro 8550a: cannot install the software driver officejet pro 8550a on windows 10

Similar Questions

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• HP Deskjet 1050 (J410 series): impossible to install the software/driver of printer for laptop Windows 8

  Hi, I tried to connect my laptop (Windows 8.1-64-bit) on my printer (HP Deskjet 1050 all-in-One J410 series).  I tried to install the printer using the CD that came with it, but it shows a message "not compatible with this operating system". After reviewing previous questions here, I tried to download the software driver for this printer. None of these files have no effect with some presenting a message saying that the device must already be installed on the laptop for it to open. Anyone able to help?

  Thank you!

  Hello

  Please download the following installation package, save it on your computer (remember where) after this fight, click on the downloaded file and run as administrator.

  http://ftp.HP.com/pub/softlib/software12/COL32611/al-109412-3/DJ1050_J410_1313-1.exe

  Your printer has only USB connection:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03775352/

  So ONLY plug the USB cord/cable when the installation process asking.

  Kind regards.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Satellite M60-176: cannot install the graphics driver

  Greetings,
  I'm trying to reinstall the original driver from Toshiba site
  on a satellite M60-176 disabled ATI X 700 256 MB dedicated

  version is:
  Driver VGA (ATI M24C/M26P)
  V8.121.050322a - 021880C
  Driver VGA (ATI M24C/M26P)

  The error message occurs when I install the software: Setup copy dll, install some components and stop at the installation of the driver slide with message (translation from the french) "Setup was unable to complete the installation, try to configure your graphics card with vga standard it before running the Setup program.

  When I try to detect the card with control panel and chose the file CX_21880.inf in 2KXP_INF, the process copy the dll, but in the end complains that "a problem in installing Radeon X 700' and then the error is"ACCESS DENIED"

  I tried to follow the sequence as:
  uninstall all remove them, go in safe mode, video card (I can't put a good VGA card)

  I ' v tried a driver (Driver Cleaner pro) removal tool then restart XP and then try to reinstall the driver of toshiba original ATI: same problem

  TOSHIBA support put me to BIOS 1.60 level: same problem

  I cannot conclude that this original toshiba video driver cannot be installed on a toshiba...

  Actually I'm under standard with vga display 1152 x 864 32 bit colors with slow rendering

  I'm really ask for help, because I do not know how...
  Kind regards
  Ludovic

  Hello

  What happens if you install the operating system from the Toshiba Recovery CD?
  This CD also contains the ATI graphics driver.
  How about installation of the graphics driver on the site omegadrivers.net?

  But I must say that it is very strange question. The driver from the Toshiba site should work.

• Satellite A300D-17Z - cannot install the display driver for Vista

  Hello

  There is a big problem with my A300D-17Z.

  The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

  Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

  Hello!

  Have you tried to install the driver to display on the Toshiba site? You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

  You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

  Good bye

• Portege M400: Installtion Windows - cannot install the RAID driver

  Hello world
  I installed my original form of the system DVD Toshiba (60 GB partition).
  So, I bought the second system with my notebook (Windows XP Pro OEM PL) and I want to install it on my second partition. When installing WinXP installer asked me about RAID driver on drive A: (I USB floppy drive, so it's no problem)... next step - partitioning - no problem. But when Windows starts to copy files (after select and format partition), ask again on RAID driver disk A: - and that is the problem, because my floppy drive is not present (maybe disable it windows after formatting the partition, I don't know)...
  There is also no results:
  -J' tried to install Windows on USB HDD, but there are blue screen after the first reboot,.
  -J' have tried to compile the RAID driver in driver.cab, this does not (or I did wrong).
  Someone has an idea how to install my second system? It is OEM, and I don't want to lose him.
  .. Sorry for my poor English :)...

  Hello

  After installing the driver RAID you should not make any partition or format the HARD drive.
  If you do this, the RAID driver is deleted and you will get an error.

  So do all the changes on the HARD disk before you install the RAID driver.

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

• Satellite A50-109: cannot install the latest driver for card ghraphic

  Hello

  When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
  THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
  Please help me
  my graphics card: Intel 82852/82855 GM/graphics controller GME

  Please help me

  Hi Milad,
  Did you get the new driver from the web site of Toshiba or others.

  The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

  HTH

• Satellite L300-01:00 PSLBGE - cannot install the graphics driver

  Hello everyone.

  I have a big problem with my laptop video driver.
  Yesterday, I started my windows and put Windows Vista on it.
  I got all the drivers from the toshiba site but ran into a problem with the graphics driver.

  When get it Setup starts and them it gives me an error "this computer does not meet the minimum requirements for installing the software. The Setup will exit. I must say that before the start, I also got Vista and it worked.

  So can you please help me because I don't know what to do to...
  I tried all the possibilities

  Thank you very much

  Teodora

  Hello

  You can try to install the graphics driver in Device Manager.
  Go to the Device Manager, choose graphics card, click on update driver, then point to the (ini files) graphics driver files stored on the HARD disk and complete the installation

  Try this usually it should help

• How can I fix this error 800703e6 invalid access to memory location tries to install the software driver high definition audio

  After installing windows vista sp2, lost all the sound elements, when I try to reinstall I have error "driver has been installed correctly, impossible to install the software for this driver... when I tried to use windows update, 800703e6, invalid access to memory location error I received...

  You will have the good idea after viewing this thread. http://www.Vistax64.com/sound-audio/291850-no-sound-error-800703e6.html

• Error 1904 - cannot install the Software Desktop for blackBerry Smartphones

  I also had similar problems I've read on previous posts. I have four boxes of different error that arises when you try to install the software. I tried everything that was recommended at the previous posters, nothing helps.  Becoming very frustrated. I have a blackberry 8330 and windows xp. All reference failure to check of the diff dll errors. Any other suggestions?

  You may think using DTM WITHOUT Media Manager. Use the procedures to uninstall/install sdgardne, but download DTM without Media Manager.  Once done,

  Go to options-support card on your BB
  The settings should be:

  Media card support: on
  Encryption mode: no
  Mass storage Mode support: on
  Auto enable mass storage Mode when connected: Yes

  Once activated, when you connect your BB via the usb port, a windows Explorer will open and show your device as another drive on your pc. Then, you can simply drag-and - drop your photos, videos, music, documents between your pc and the BB.

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Satellite L555-S7008 - cannot install the display driver Windows 7

  Hi guys

  I'm confused now
  I have a Satellite L555-S7008, I installed a Windows 7 ultimate edition, but unfortunately the display driver did not work. Now I have pain in my eys because of the resolution. What should I do to make it work?

  Hardware found "Mobile Intel (r) 4 Series Express Chipset Family", but it does not support this type of material

  (2) what driver should I I installed to the PCI network communication controller?

  Hi ROCO_1,

  I had a similar problem with the display driver I t could not install it. I put t know why it happened, but the solution is that you need to install the display driver through the Device Manager and not from the configuration file

  So go into Device Manager and right-click on the graphics card and select put to update driver. Do not choose the Advanced installation where you can choose the driver directory yourself. Select the files that you have unpacked the file downloaded and that s all.

  About the communication network PCI controller, it could be both: WLAN or LAN card. So, make sure that the two drivers are installed.

• Satellite A300D-11 t (PSAK0E) cannot install the video driver

  Hello!

  I can't find a video driver for my laptop (Win XP). Unfortunately I lost a CD I got with it. The drivers I found on the official website of Toshiba didn't work - display-20090925081024 or display-20071214163138.
  A user of the forum USA Toshiba (cee_64) advised me to install a driver of motherboard chipset, but I could not install a driver because the appropriate web page (http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK) says that, for the following parameters: short model No. = PSAK0E, Type of driver = "Chip Set Utility", country = all language = all , he could not provide any driver: "Sorry we could not find the drivers matching your search criteria", so I assumed that simply (and apparently unjustly) I don't have the drivers for my motherboard. A few other drivers (its LAN, WLAN,) are provided in the section of the conductors of the web page and I have successfully installed.

  Can someone help me? Please, I beg you! :-) For now, I use 1024 x 768 mode only... :-(

  Best regards, W.P.

  And what happen when you try to install THE display driver?