OfficeJet Pro 8600: copies too light

Similar Questions

• "HP Officejet Pro 8600. Too light scans for faxes. Recipient cannot read the content of the page.

  It would be nice if someone answered my question in due TIME!

  I had a simular problem.  ONLY when scanning with the help of the charger the scans would come out too light, could hardly read them.  This also happened when making copies using the feeder.  I called HP and THEY WERE USEFUL.  They claim that it be plugged into a surge protector can cause problems with feeding.  I unplugged the protector and went directly to the wall outlet.  Problem solved.  They say he is a surge protector integrated the maching, so no need to plug it into one.

  Seems a bit weird to me, but I don't like. It works now.

• OfficeJet Pro 8600: Officejet Pro 8600 copies are almost completely black

  Copies of the Officejet Pro 8600 are almost completely black.  The party central - perhaps an ich in width - is somewhat readable.  Printed documents are okay. This printer is 2.5 years old and worked fine in what concerns all the until today.  Thank you.

  Hello @Tim1943 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you use in the copy output problems.  I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest you then plug the power to the printer into a different wall outlet.

  Another recommendation would be updated the firmware of the printer:

  Printer updates for HP Officejet Pro 8600 (N911), 6600 (H711) Officejet and Officejet 6700 Premium (H711) e-all-in-One Printer Series

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Officejet Pro 8600 copies more

  My machine made it perfectly clear copies of the glass. However, when I use the document feeder the copies come out with several lines running down the middle of the page.  What can cause this and I can it fix it myself?  Maybe it's too simple to clean something?

  I hope that solves your problem. http://support.hp.com/us-en/document/c02881567. Do not forget to connect the printer directly to the walloutlet.

• OfficeJet Pro 8600: Small panel light fading

  The small light panel that allows me to choose to fax, copy, scan etc is fading and becomes hard to see. How can I fix to this please?

  Hi @JM178,

  Welcome to the Forums of HP Support! I see that you have problems with the light on the screen. I want to help you. If this helps you to find a solution, please click on the button "accept as a Solution.

• HP Officejet Pro 8600: Copies of black stripes

  My printer is printing and scanning no problem, but when I copy something, it comes out covered with vertical black lines on the content.  How can I fix?

  HI - try following the steps described in this document the problem.

  Hope that helps.

• HP OfficeJet Pro 8600 N911a - two-sided copies

  I'm eager to take a two originals face and make a copy of both sides.  When I press the ECO button it says that this option is disabled.  I can't understand how to turn it on.

  Hello chogan

  The ADF on the Officejet Pro 8600 N911a doesn't have the possibility to make a double-sided copy. This is because the ADF doesn't have a duplex unit to get the original in paper and flip so that the other side can be copied.

  You can make copies front and back of the dumpster by setting the option and flipping the page once the first side is copied.

• HP Officejet Pro 8600 n11a - print multiple copies

  I use a MAC desktop computer.  I never had a problem with a printer this one up.

  It prints several copies, even if only is selected.  I put it to facotry settings, nothing helped.

  Hello SaMac2,

  I understand that you have found several printed copies when you use your Officejet Pro 8600 and Mac. If you make a copy and select only one copy, it print multiples also?

  You can try to uninstall the printer software, repair disk permissions on the Mac, put the Apple icon updated, restart the computer and download / install the software again. (since I don't know the installed Mac version, click on the 'Download' link, select your operating system and then hit next, click driver - product Installation software then download).

  I'll check for your response.

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• prints too far to the bottom of the page - officejet pro 8600

  Have an officejet pro 8600.

  Recently, when printing, two problems occur...

  (1) the document printing starts printing about 1.5 "to 2" further down the page then it should. This translates into the lower part of the document is not printing.

  (2) there is a crease/fold about 3 "from the top of the sheet.

  It seems that the paper is loaded too soon or that actual printing is delayed.

  We have cleaned all rollers and check the wheel star - no damage

  Thanks for your help

  Hello

  I suggest you rework the printer.

  Setup menu > tools > align printer

  Let me know the results.

• Beautiful copies. Print programs Officejet Pro 8600 N911a

  Just ran 20 copies without any problem. When I try to print from Access, Word, Excel, etc. printer behaves as if it's going to print, but then displays the message 'Out of Paper '. Windows 7 64-bit. HP Officejet Pro 8600 N911a. Is about to resume

  Hello raynos,.

  See if this troubleshooting article helps you resolve the problem you are experiencing.

  ' A ' Out of paper ' or 'Choose the motor at a standstill' Message is displayed and the product do not pick up or feeding the paper

• OfficeJet Pro 8600: Printing photos - too yellow

  Hello

  Whenever I try to print photos from my Mac to my officejet pro they have too warm/yellow.  I calibrated my monitor with a Spyder Elite 4.  Yes I know there is a difference between the light reflected and planned but this yellowing is great, people are not 'tired' looking - they grow soured range...

  Is there a way to specify the way a different ICC when printing on a Mac?  I'm trying to print from Lightroom CC edition is of no importance.

  Thank you.

  Hello

  Finally understood my problem.  My problem is that my monitor while it is calibrated, was not accurately reflecting the white balance of the picture.  Thus, while the photo looked GREAT on my screen, it was distorted "hot" which appeared in print.

  White balance setting solves the problem.

• HP Officejet Pro 8600 more: problem with HP Officejet Pro 8600 more light

  As soon as I turn on my printer after some time one get a short flash printerscreen code: B84D7A4. Subsequently, I get the massage that I have to powerdown the printen and turning the power on again. This repeat hisself without end. If I disconnect the network cable from the printer starts normal. As soon as I connect the network cable, I get the same error code.

  If I connect to another network port, I have the same problem.

  Who knows the solution for this.

  I can still print via USB cable in. But I don't get the option to the printerscreen: SW update.

  Greetings @HPofficejetPro,

  I saw your post about the problems you are having and I can find some things that you can try.

  Have you tried another ethernet cable?

  The same thing happens when you connect with a USB cable?

  HP regularly publishes updates of firmware that can also correct the problem you are experiencing. With the USB cable is connected, you can click on this link to download the firmware update for the. HP Officejet Pro 8600 more e-All-in-One Printer - N911g.

  Is the printer connected directly to a wall outlet or a surge protector or a power bar? We want to connect it to a wall outlet so that we can eliminate the source of energy as the primary cause. See this document for more information on the problems when connected to an uninterruptible power supply/Strip/surge protector power (Note: this document is not limited to printers Laserjet.)

  Please let me know the results, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Officejet Pro 8600 Premium: HP Officejet Pro 8600 Premium e-All-in-One - N911n

  My HP Officejet Pro 8600 Premium has worked great for years, but now the problem is that then adaptation pages in black ink in the table, the copies are exposed and too slightly inked to read.

  Printing is perfect in black and color of the computer.

  The probem has to do with the top of the table side only.

  Can anyone help with a solution?

  Thank you

  4TT

  Thanks to Mitch to HP technical support;

  Solution was to turn off the device, then reconnect.

  Yesterdays failure tempary must have played with the internal settings.

  Works great once again,

  Thank you

  4TT

• Do not feed paper for incoming faxes, officejet pro 8600 premium

  I have a HP Officejet Pro 8600 Premium.  Recently I started having a problem with my incoming faxes.  An incoming fax comes through, and when it will feed the paper to print, it shows on the screen that it is paper.  He goes through the process of trying to feed paper through and makes the sounds, it does usually when I am out of paper in the feeder, but I'm not.  It prints and copies fine.  Just having this problem with the incoming fax is not able to print.  Help!

  Too bad!  I found the problem.  This is a printer 2 bins and sort my incoming faxes were trying to feed from the 2nd drawer (which was empty).  I have no idea how the setting has been changed, or how to restore it, but I'm not worried about it, now that I know what it is.  I was able to print any faxes that never came through (all 24 of them, Ouch!)

  Thank you!