OfficeJet Pro 8600: Help: I changed the cartridges and they are locked (JO 6800)

Similar Questions

• OfficeJet Pro 8600: just installed new HP cartridges and ink colors are disabled!

  It's very expensive 4 950 XL and 951 cartridges XL that I bought at Staples a couple of months. I noticed right after installation that bright red in my images were now feel like dull brown. I printed a few pages from the control panel of the printer test. Cyan and yellow seemed pretty accurate, but magenta was a deep purple, not the lightest color pink or pink, I expected. I think that something was wrong with the series production of this cartridge. I hope I can find my receipt, but if not, always wait that HP would replace a full cartridge that was flawed in manufacturing. My HP printer has an accuracy of colors great until about a week ago, but is now almost useless for the work at home that I want to do - for example custom greeting cards, cards, posters, etc.. I printed the test pages don't show any problems with the alignment of the head, and the stripes of color show no scratches. Just a magenta that is close to her correct hue, based on my long experience with color ink jet printers.

  An HP service technician spent 1/2 hour on the phone with me yesterday, and we could not solve the problem. I had already worked through the steps that you referred me to. I have never known or heard of a problem like this, and had not the technology. When I printed the Diagnostic Page of print quality, I have absolutely perfect alignment and bars very clean black, gray and colors. Yellow and cyan looked quite right. Magenta was a deep, dark - purple not magenta I am familiar with years of work with inkjet printers. But it's printed cleanly, I started to believe that the new magenta cartridge, which had just been installed as well as 3 other XL cartridges, had somehow got filled with dark purple ink. However during our tests, asked me to remove the magenta cartridge and pick up some color from around the beak with a Q Tip. When I rubbed on the print paper, it was true magenta!

  Other theories were: (1) that somehow the circuit board of the printer and print head did not and triggers the two nozzles magenta and cyan times reported magenta printing. That seems the most likely answer. 3 the theory was that the ink in the print head channels had a leak between inks cyan and magenta. It seems less likely, because there is no impurity in the print cyan, as well as the color printing was absolutely consistent over several test pages. The tech asked me to remove the print head Assembly and clean the area around the nozzles. That did not help.

  In the end, I was offered a model of printer a HP refurbished more recent than mine. The price was very reasonable - much less than the cost of a printed circuit board or a feeling of head. He also used the same cartridges, so my XL series would be used later once provided with the new printer cartridges are consumed. I took that offer and hope to have a new printer from Tuesday. So I'm glad HP service.

• Office jet Pro 8600: how to change the folder for the scans on my Apple?

  Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

  Thanks for the help!

  Hi @jgossc,

  I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

  To change the destination please follow the steps below and let me know the results of your efforts:

  • Open HP utility
  • Select Scan to the computer
  • Click Scan tasks to change
  • Choose a shortcut to scan
  • Select Edition
  • In the options listed here, you should see scan destination

  If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

• HP Officejet Pro 8600 - Paper copy on the glass of the scanner, Officejet tries to copy the ADF

  I'm trying to copy a document on my HP Officejet Pro 8600.  I placed the original face down on the scanner glass.  There is no original in the ADF.  Then, I pressed "Copy" and "launch in black."  the Offficejet then "think" the original is in the ADF file and try to copy a non-existent original.  The Officejet then generates a paper jam «»
  in the ADF file' error message with instructions to clear paper jam and press 'OK' and spews a piece of paper from the paper tray. There is not an option for 'back '.  If I try to humor the Officejet by opening and closing the cover of the ADF and pressing 'OK', the Officeject generates a copy which is covered with black ink.  If I ask preview copy o, the document on the scanner glass is displayed.  I can adjust margins, etc.  When I select then 'copy' and 'Black start', the Officejet is trying to copy a nonexistent document in the ADF and generates the "Paper jam" message again.  Since there is not an option "go back", I turn the printer off, then turn it back on, and then try again.

  How do I train me or the Officejet for copy of the scanner glass when the original is located on the glass of the scanner NOT the ADF?

  Thanks for your help to solve this frustrating problem.

  Hi Knitter507,

  Try to do a hard reset as described in the following link.  Click here

  If that doesn't help, can you print a printer status report and give me the a.) Product # and B.) Version of the firmware of the printer?  To print the report, press on the arrow to the right on the screen of the printer control and then configure / reports / Printer Status Report.

  What is the operating system for your computer?

  You are able to make a hollow photocopy the ADF?

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• Hello. I do not understand what that error for Adobe Illustrator and Adobe Muse creative cloud products: I open the app and they are closed today. In the writing of Muse: app error #1009 in Illustrator just closed.

  Hello. I do not understand what that error for Adobe Illustrator and Adobe Muse creative cloud products: I open the app and they are closed today. In the writing of Muse: app error #1009 in Illustrator just closed.

  Please check:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  Adobe Flash Player Error #1009 Windows 8.1

  TypeError: Error #1009

  Flash Player ' TypeError: Error #1009: cannot access one - Microsoft Community

  It seems to be an error in the Flash Player rather than illustrator.

  Concerning

  Stéphane

• HP Officejet Pro 8600 + not to recognize the new real black and yellow ink cartridge

  HP Officejet Pro 8600 +, this machine is 1 year old, just out of warranty and is not recognizing the new yellow and black cartridges HP ink. Tried the hard reset and cleaning the parts set out in other posts in this forum without success.

  Disappointing that the colored inks run low if fast even when you do BLACK only printing and now that the mahine a work stoppage at its destination.

  Any help/ideas?

  Hello

  As you have tried with the new cartridges, I think it might be a problem with the printer or the print head.

  Please call the HP Technical Support for assistance.

  If you are in US , toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on "'Accept as Solution" if it has solved your problem, if others can find. "
  I work for HP

• HP officejet Pro 8600 +: Missing page in the «HP Print for Chrome» software orientation option

  I can print OK in the format default portrait of a model of Toshiba Chromebook CB30-B-104 for a HP Officejet Pro 8600 + using "HP Print for Chrome" (installed from the app store for Google Chrome), but I can't find an option anywhere to change the page orientation. So if I print a document/image oriented in landscape format, it occupies only half a page of A4 portrait oriented superior. I tried to turn the image/document in the print dialog, but the rotation is ignored when printing is performed.

  Is this a "bug" or am I missing something?

  Updated February 10, 2016

  My original statement was misleading. I should have checked my facts more in detail.

  I cannot find an option called "Layout" to select "Wonderful landscape" or "Portrait" page orientation when you try to print the PDF files. When you try to print from other sources, the 'Layout' option seems OK.

  Hello @JBL11.

  Welcome to the Forums of HP's Support. I understand that you have a problem with the page orientation when printing with HP for Chrome print Chromebook. I would like to help,

  When I tried printing of Chrome app I had an orientation option. I pull a document and press Ctrl + P.

  Then I double checked that Print of Chrome was my printer destination. (I also use Google Cloud Print to the same printer).

  My options going to the bottom of the list are Destination, Pages, and page layout. Put in page gives me the ability to change from portrait to landscape.

  Have you tried to uninstall and reinstall the application?

  1. Click on the list of apps icon in the launcher at the bottom of the screen.
  2. Find your application in the list and right-click (click with two fingers on a Chromebook) its icon.
  3. Select Delete chrome.

  Gives it a try and let me know how it works.

  If this solves your problem please click on accepted Solution so that other people with the same problem can find the easiest answer. If you want to say thank you, it's always nice when someone clicks Kudos. If you have any other questions let me know.

• OfficeJet Pro 8600: I got a new modem and the router. I uninstalled the HP software, but wizzard wireless configuration is locked.

  I uninstalled the software so I could start over.  Configuration Wizzard is locked and I can not understand how to get unlock.

  Hi @bobbalou,

  Thank you for visiting the Forums of HP Support for a solution to your printer problem.

  I understand that you replaced your modem and router, but could not connect your HP Officejet Pro 8600 e-all-in-one printer to the new network, because the wireless configuration wizard is locked. I would like to help with that.

  Try to restore the default network before attempting to run the Wireless Setup Wizard.

  1. on the touch screen of the printer, press the right arrow to display the second navigation screen.

  2. press on the installation program icon.

  3. tap network, then press the default network.

  If you are able to restore the default settings of the network is should allow you to run the Wireless Setup Wizard.

  If you're locked up because he had a password set in place on the printer, you will need the password to access the server (EWS) of embedded printer online web to change the settings of the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

• OfficeJet Pro 8600 Plus: cannot remove the pop-up windows deleted printer HP Pavilion p6-2014

  Hello

  I read the corrective action of 24/09/15 to HP Community@Felix_B to remove my HP printer previous (see the info solution reference below). He has worked to eliminate a group of print job corrupted. However, the pop-ups started continue. The two pop-ups State "there was a problem starting C:\Program HP HP Officejet Pro 8600\bin\HPStatusBL.dll. The specified module could not be found.  Can you please help me remove?
  
  Thank you-Chuck

  Re:

  Solution! Re: Unable to remove my printer
  Options
  24/09/2015-13:32
  Welcome to the community of HP @Felix_B,.

  Hello
  File Exploer type %appdata%\Microsoft\Windows\Start menu Startup into the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• HP officejet pro 8600 more random print the unreadable text

  Hello

  I have a problem with a newly acquired HP officejet pro 8600 N911g. When you print the document, some pages are filled with unreadable text instead of the original text (e.g. ' eft! bdujtop! dpssf-wcy TPQ! QSF"). It happens whenever I have print the same document, and sometimes on a few lines of certain pages.

  When the same issue occur on the same page, that's exactly the same gibberish (so it isn't random text).

  Here is an example of an impression goes wrong in the middle of a page.

  The printer is plugged in and the PC is wireless.

  I tried to launch HP print and scan of the doctor, he did not find any problem.

  He tried to print with another PC, same problem happened. My OS is Windows XP with SP2 32 b.

  The printer model number is N911g, the product number is CM750A and the number is 22241.

  Any advice would be helpful.

  Thanks in advance.

  Normally, this means that there is a problem with the radio wireless on the router. It may work fine for everything else for now, but it could be losing signal slowly, that would not be noticed by most of the things until the signal was almost gone. Signals of printing and scanning signal, for some strange reason, I've never even had explained to me, get back on it lose everything first and suffer the worst. I try to search for the firmware updates that may be available for your router, as it may just be a firmware issue that causes a light signal lose. If that does not resolve the problem, I would look in get a new wireless router.

• OfficeJet Pro 8600 more Scan to the computer

  OfficeJet Pro 8600 more "computer scan", "Save as editable text" computer PC with Win 7 and JO 8600 Pro installed and operating normally, JO 8600 Pro on a wired home network.

  How does the 8600 file names and how can I control the names.  My 8600 JO ProPlus is name my text files using a name I once attributed to a sweep of several weeks rather than use some name generic scan or the date!

  To change the settings of advanced scanning

  Function of your printer, advanced settings contain options to adjust the brightness, contrast, quality scan, set the OCR language and change the destination of digitization.

• HP Officejet Pro 8625: HP Officejet Pro 8625 impossible to change the order of printing back to the front and want to change

  HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change

  The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625.  You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here.  When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later."  After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done.  Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK.  The Page order option will be available in the Advanced Printer Options tab.

  

  

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">