OfficeJet pro 8600: how to stop hp network communicator has not stopped working message

Similar Questions

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• OfficeJet Pro 8600: How to stop a current scanning application

  While trying to scan a new document, I get an error message saying that the scanner is in use.  How to stop an open scanning application.

  Hello
  
  Thank you for using the HP Forums. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not help, we recommend uninstalling and reinstalling the software FULL of features.

  Hope that helps.

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• OfficeJet Pro 8600 - How do I 'create and print a copy to one side of a duplex ID '?

  How do I "Create and print a copy to one side of a duplex ID" which is advertised as a feature in the commercial documentation for HP OfficeJet Pro 8600?

  I read the community forums help and documentation of the printer without result.   Any help would be appreciated.

  simple.
  1. press on copy
  2. click on settings
  3. click on 'Copy ID' and select 'on '.
  4 OK

• OfficeJet Pro 8600 Plus: PC stopped communicating with wireless Officejet Pro 8600 more

  My HP printer has been connected to my PC via my home wireless network and work without problem, for 18 months.  A few weeks ago the printer stop appearing in the printer dialog box when I went to print a document.  The printer continues to operate wireless for all my mobile devices without problem.

  I went through all the HP process and tools for troubleshooting, downloaded and installed all updates, nothing helps.  I uninstalled my PC off and now it will not reinstall.  The installation process see the printer on the network, but when I try to install it it said "cannot be installed on the network" and it goes no further. I lost hours and hours trying to get to the bottom of it, nothing helps.

  What is the problem?

  Hi @Layli,

  Welcome to the HP Forums!

  I noticed that your PC has stopped communicating with your HP Officejet Pro 8600 wireless connection more. I'm sorry to hear that, but happy to help!

  Out of curiosity, what happens if you install the printer using the USB method wireless configuration? Check out this guide, your wireless printerand select Configuration USB wireless.

  Also, if this does not work, able to install the printer are you using a USB connection? In this way, we can see if the problem could be the connection itself or not.

  You see error messages on the control panel of the printer at all?

  Thanks for posting and hope to hear from you soon!

• OfficeJet Pro 8600: How to load an envelope #10 in the status bar and align it for quality printing.

  How can I charge a #10 envelope in the tray to print.

  Welcome to the Community Forum of HP.

  Series of e-all-in-one-HP Officejet Pro 8600 User Guide

  See Page 25

  Don't forget to select the media Type in your printer preferences when you go to print the envelope, so the printer knows that he has to wait for the thicker paper of your envelope #10.  This allows the printer the well-positioned rollers and ink and the drying time, too.

  Printing options

  Reference:

  HP Officejet Pro 8600 e-all-in-one printer - support N911a

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• HP Officejet Pro 8600 won't stop printing.

  My HP Officejet Pro 8600 bought aproximatelly 4 months after doing some copies of web pages today all a süden after extinction of the last impression continues on its own to spew more than 25 pages of text without a showdown on his own pages.  The printer worked perfectly so far.

  My lap top is a Windows 7 operating system and 64-bit.

  I was not able to stop it until I disabled the printerl.  Can you help me please.  Thank you very much.

  Hi Jabzi, thank you very much for your answer.

  Your answer was correct is an ACCEPTABLE SOLUTION.

  Also I forgot to give a KUDOS then please mark it for me since I was not able to return to the page before this one.

• HP Officejet Pro 8600 Plus doesn\ ' impression on network t...

  Two weeks ago, I set up a HP Officejet Pro 8600 more using two USB & ethernet cable connections... Everything works very well on all devices - iPad, iPhone, MacBook Pro, Win7 desktop PC and portable Win7... until the printer goes to sleep.  We does not display every day, so it may be a few days between printing / scanning.

  As I kept an eye on to do this, it has happened twice now, it may take a few days before the printer is unresponsive.  When laptops Windows 7 need to print, the printer does not respond until what feed us the cycle.  The INVESTIGATION period has not changed on the printer and the software HP Update says that everything is up-to-date.

  From what I can tell, other devices - Win 7 Desktop, iPad, iPhone, and MacBook Pros seem to be the problem.

  Win 7 laptop 1 - connection WiFi AP w / cable for printer

  Win 7 laptop 2 - cable ethernet to AP w / cable for printer

  Win 7 Desktop - USB cable for printer

  MacBook Pro - cable ethernet to AP w / cable for printer

  iPad/iPhone - WiFi connection AP w / cable for printer

  Printer Firmware Version - CLP1CN1232AR

  Set a static IP address in the printer out of the router's DHCP range.  Use a channel wireless fixed like 1.6 or 11 never 'auto '.   Power at the same time.  Power on router wait 2 minutes.  Please turn on printer and connect.  Try now.

• 8600 Officejet Pro 8600 no more stopped printing

  I have an Officejet Pro 8600 Plus 8600 that I installed on my home wireless router.  I use a Dell laptop with the Windows 7 operating system.  I have installed the printer without a problem when I bought it a month ago.  A few days ago, I tried to print a page before going to my work and could not operate.  I don't think much since I'm in a hurry, but later when I returned from work, that my printer was still not working.  I unplugged the printer and close the router and the laptop.  I rebooted everything and always the printer would not work.  No test page or anything.  I uninstalled the drivers and reinstalled and the Test of Fax report prints fine, but when I tried to run the printer test page, I got the error message "Unable to communicate with the printer."  I have worked on this for two days now and nothing I will work.  I used the doctor Print and evrything goes, but still no luck.  Help please?

  WEEL I finally thought to it.  My McAfee did an update that wiped out my ability to print.  I changed the settings for McAfee and I was able to print again.  Thanks for your help!

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi

• HP 8600 Pro - default is Fax - HP Officejet Pro 8600, how can I change the ordinary printer

  Running Win 8.  Under control panel, the print device only shown is Fax - HP Officejet Pro 8600.  In specific applications, I choose the HP Officejet Pro 8600 in the drop down menu, but this option in not avialable in the control panel to make the printer regularly by default.

  I hope I am explaining that properly.

  When you right-click on the Fax - HP Officejet Pro 8600 icon and browse to set a default done it gives the choice, if not
  Click on the printer icon and look for the properties of the server printer on the top of the page to go to tab drivers and check if it shows you only officejet Pro listed twice a 8600 8600 series and the other as a Fax.

  If you see the two that could be the problem of installation does not complete successfully. I would uninstall from Add/Remove programs to remove the entry from the server properties and install the lates SW of the website the link is below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4132&product=4323659&sw_lang=

• HP OfficeJet Pro 8600: the printer stops after printing

  Hello. I send a print job and it will print, but then he is hampers and says the feeling is 100% full, but it will not erase and move to the next item in the queue. I have to press DELETE to erase the previous job, it will then say opening printer connection and take forever to the next item in the print queue. Any suggestions are appreciated. Thank you.

  Hello @dawnbeb and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend to reinstall HP Officejet Pro Full Feature software and driver - OS X 10.7

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Officejet Pro 8600 printing very very slow - network printer

  Print very slowly.  For a document of several pages that can be printed a correct page followed by letters and random symbols on the following pages printed on a line at the top of the sheet of paper.

  Printing test page OK.  Using the Windows 7 on an Apple Mac operating system.   Impression was carry out well so far.  Tried stop, check the cartridges etc.  Nothing seems to work.

  I am using Bootcamp.  However this communication of computer printer works perfectly for months until this time.  I have tried everything, checked everything.  Ensured that I cancelled all printing of all laptops (our printer is connected via WiFi at home (Home Office).  Finally, I pulled out the mechanism of double-sided printing see if paper jams exist.  No jam.  Moved to the printer across the room, small room of 6 feet.  Plugged into an outlet different.   Restarted my computer under Mac OS, operating system, and print.  Print perfectly.  Restart Windows via Bootcamp and he continued to print perfectly.   Lost in the morning to try to make it work! But happy now. Can't really say that one thing has got to work.  (perhaps restarting the computer?)

• HO OfficeJet Pro 8600: how to remove a static ip address on my HP 8600, using mac 10.7.5 work with wifi

  I have trouble printing through my wifi network. How to remove a static ip address on my HP 8600, using mac 10.7.5 to work with wifi?

  With the help of my NetGear N900 / CG4500BD modem/router with DHCP, there are different IP addresses of the printer, if the printer is connected is 192.168.0.13, when the printer use wifi IP is 192.168.0.20, and on the printer, it shows 192.168.1.142 I think is a static IP address, because it can cause the confussion.

  I appreciate your help, thank you, the Job Dr.

  Hello

  Please go to system-> Network Preferences. Select the airport on the left, and then click Advanced in the bottom right. Switch to TCP/IP and select "using dhcp". Click ok, and then click on apply. After a few seconds, you should get an IP address from the router.