OfficeJet Pro 8600 more: printer will not recognize this yellow cartridge has been refilled.

Similar Questions

• HP Officejet Pro 8600 more print but not scan

  I have an Officejet Pro 8600 and I use Windows 7 Ultimate (64 bit) and it print and copy but will not scan. I had a hell of a time trying to get this thing to scan - I even spent an hour and a half with HP technical support and they could not fix it and finally gave up and call me Micro$ oft said that it must be a windows problem (Windows is up to date, incidentally).

  I tried to open the scanner software and nothing happens when I click the icon - the loading icon flashes for a second, then only the mouse pointer. Nothing happens if I try to boot from all programs. Nothing happens if I try to scan to the computer of the other printer told me the failure of sweeping and that there could be reasons of severalpossible (unrelated, software used, etc.).

  I have installed and uninstalled. A couple of times he was having trouble with the installation, but finally got it connected. Once it would not uninstall in Control Panel until I did it directly from the HP folder. I connected it by USB and wireless. I installed the version of bloatware. I cleaned that out and I tried the only version of drivers. The HP support person had me go and removed a bunch of stuff in the registry. I tried to run as an administrator. Nothing works. I even tried to scan using Windows Fax and scan. I disabled Kaspersky and made sure that my firewall is turned off.

  I am at my wits end with this and certainly regret my purchase at the moment. Help!

  Hello, it happens to the analysis of Windows (WIA) and generates an error:

  "The Windows Imaging service does not work... If the problem persists, you will not be able to scan using the applications that use this service, such as Microsoft Paint. Scanning software HP could still work. »

  It asked me to restart, and then re-run the diagnostic tests, but I got the same result.

  Then, I jumped to HP Scanner Twain and got another error:

  "The Twain component is not working properly because the product is used by another process. Save your work and close all applications. Turn the product off, turn it on again, and then click on restart and repeat the test. »

  He told me then the problem persists to uninstall the software, then reinstall the Full Feature software (I did, but available).

  * EDIT

  Problem solved!  After you had me run the diagnostic tool I googled the WIA problem and found that many other people had the same problem. A person has a response from Micro$ oft saying that it was a Windows 7 issue and how to fix it - this is the text I found:

  To start the WIA service, you need start all services of dependence. To start the dependency services, please follow the steps mentioned below:

  -> > click on start-> type "services.msc" and press ENTER, once you get up the services window, please do the rest steps.

  -> > first check and write down all the dependency services: -

  -> > right WIA-> properties-> tab dependence, check the services of name listed there.

  It must contain the following services:

  * RPC remote Procedure Call

  -> > DCOM Server process Launcher

  -> > RPC end point mapper

  * Detection material core

  Make sure that all of the above services are started in the services list.

  Last time, we started the Detection hardware Kernel, which solves our problem.

  (Andy, it's important.  Choose "Detection hardware Kernel ' and start this service which should start your 'Windows Imaging Acquisition '.  If it does not then select WIA and change the departure to "automatic".  This fixed my problems) after all dependency services start, please try to start, WIA service to solve the problem of .                                                                                                                                                                                       

  (For those who are doubtful with computers, like me, when you click on the start icon, you can type services.msc in the box of research programs or click on run and type it in there). Once inside the list of services, you can look at the dependencies by right-clicking on the Windows Image acquisition service and selecting Properties. Take note of these dependencies. Then back to the main list and watch to see if these dependencies are started. My Shell Hardware Detection says disabled, so I right click on it; However, starting selection is grayed out and I couldn't select it from the drop-down list box, so Startup type I selected Automatic, apply, close the Services window and then started my Scan software and presto, it worked.

  Thanks for setting me on the right track!

  
  

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• OfficeJet Pro 8600 more printer

  I just bought the printer more Officejet Pro 8600 & installed without any problems, but it doesn't connect to the internet/web services? It is connected to my home network & print etc, but when I try to activate the internet according to the guidelines, it searches for a while with "Enabling Web Services (ePrint & Apps)" on the screen & then reads "Web Services (ePrint & Apps) could not be activated.

  When I tried to activate the web service during the instalation, reading pages as if she did not go off I would go to a page to download the necessary drivers but this never happened and the only thing I could do was to select the button 'Next', who finished the installion without the work of internet/web service.

  Does anyone know of this problem and if so, please can you me how to connect my printer to the internet.

  It's great to hear Roses66. "If you could mark my previous post with the ' accept as Solution" it will help others in this community to find our easy conversation.

• Re: HP Officejet Pro 8600 Plus print but not scan

  I'm on Mac OS X 10.6.8 and recently bought an OfficeJet Pro 8600.  It worked fine for about a month, and then we moved into a new House.  Now, it print but not scan to computer.  It scans email fine.  Same problem wired or wireless.  It is said the computer Scan is not enabled.  When I try to activate scan to the computer using the HP utility, he runs for a long time and then says that the connection has been lost.

  Hi mpk1969,

  Mac OSX:

  Try the following steps.  If you want to learn more about your product, click here.

  How to perform a scan: OS X v10.8

  1. go to the HP utility to 8600 of (Preferences system, scanner open, click on the utility tab)

  2. under scan settings, click scan to the computer

  3. make sure that a check mark beside enable scan of the computer

  4. click OK in all the dialog boxes and of proximity

  5. try scan of front panel

  Follow the steps below

  1. open System Preferences

  2. Open Print & Fax

  3. in the white box under printers right-click and select Reset Printing System

  Note: resetting the printing system will remove all printers in the print queue

  4 restart the computer

  5. Open Print & Fax and then click the + to add the printer to the print queue

  6. open the HP utility, and then click Scan to computer to make sure this option is

  Try scanning the computer to the printer and let me know what happens?

  Windows:

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• HP officejet pro 8600 more printing envelopes chemistry

  The normal printing process seems to work perfectly, only when printing envelopes #10 they live I have the problem with the crooked not printing any way how the envelope is inserted according to the Setup (Microsoft Word).

  To date, the following steps were taken:

  1. the version of the firmware is up to date: CLP1CN1322CR

  2. all the rollers are clean and act freely, no paper jams/particles anywhere - front or rear.

  3. the envelope seems to come out all right (looking directly at the front that it falls on the paper tray.

  4. different types of envelopes #10 were tried.

  The twisted print template is not consistent, sometimes it low angles differently and sometimes the implementation of the address of the sender and the recipient are different.

  Any suggestion would be appreciated.

  PROBLEM SOLVED

  The result is: READ THE MANUAL

  I had been assuming (incorrectly) OfficeJet Pro 8600 Plus would print the same as my previous HP OfficeJet Pro L7680 envelopes.  This model allowed me to print envelopes by putting on paper envelopes, I already had in the tray, put the envelopes on the side right side down.  He had always worked before with no problem and the envelopes printed correctly, even if you could use the status bar and adjusted the sides to accept the correct envelope size (never tried).

  On the 8600 model, you MUST remove any paper in the tray and load the envelopes in the Center, adjusting the sides to the size of the envelope.  In ADDITION, you must insert the face or envelopes down with the edge of the flap that is pointing to the right, a bit like the graphics on the bottom of the stage show.

  IF YOU USE MS WORD TO PRINT ENVELOPES AND LABELS, IT MAY BE CONFUSING BECAUSE IT SHOWS 6 POWER AVAILABLE, IF YOU CHOOSE THE ((QUATRIÈME DE LA DROITE) METHODS, IT SHOWS THE ENVELOPE IN THE MIDDLE AND THE EDGE OF THE FLAP FACING RIGHT, THIS CAUSES THE IMPRESSION OF BEING UPSIDE DOWN ON THE ENVELOPE.)

  That's what you should first read the User Guide (manual) for for the 8600 printer printing envelopes:

  Print on envelopes (for Windows, p. 39)

  Load Media (p. 24)

  Load the envelopes (p. 25)

  My frustrations have completed cockpit error.

• HP officejet pro 8600 more: printing problems

  When you print pictures and other things my photos are coming in search of all the yellow and I don't know how to solve the problem.

  worked well and for some reason any does not know what happened.please help it is really doing my head.

  If the magenta (Pink) does not print correctly and that the steps outlined in the document that I provided above do not resolve the problem, you will probably need to replace the magenta ink cartridge.

• OfficeJet Pro 8600 Plus: Scanner will not install software stopped working/Easy Start

  Unable to scan to computer, but has worked in the past. Error message indicates that the software HP for the Scan of the computer could not be located.  Have been trying to install it, it seems to be downloading but then says that it cannot install because no internet connection.  The connection is fine, works for everything else, shows very well in the status reports.  Tried several times, restarted the computer, nothing seems to work.

  Hi @SD58and welcome to the Forums of HP!

  I'd be happy to help you to install the software for your more than 8600. Using Safari or another browser? It seems strange to me that you can download the software, but then can not install, the installation requires no software. However, the Easy Start probably reaches out using internet to locate appreciate software to install. That being said, I feel the question could be linked so browser that I wonder what browser you use and if you could try another.

  Please let me know the result of using another browser and we can go from there. If using another browser resolves the issue, please click on accept as Solution to identify your post as solved.

  Thank you.

• HP officejet pro 8600 more: hp officejet pro 8600 more prints from iphone cell phone

  I use this printer for several years with no problems. I've already printed for numere and iphone / ipad. Yesterday my laptop ordinary started to give me problems and I have to reboot constantly. Today, my printer started giving problems. It works with the iphone feel but my laptop does not work. I followed doctor scan and it says that it cannot solve the problem. I unplugged the router, then printer, left off the coast for 60 seconds and then re-connected - first router, then printers. Always the same results. I see the file in my queue of the printer, but it does not communicate. I noticed that the blue wireless to the left of the home screen display is not on. The results of the test wireless network prints a page that says no problems found. The ip address is 192.169.1.2; However the address on the actual printer had a different extension. I need to use this printer for work documents.

  He says that the printer cannot be contacted over the network. Also says the device is off. However, if I print from iphone, it works.

  Can someone help me?

  

  Think about scoring the post that solved the problem as 'Accept as Solution' while others having problems may find that worked for you.

  And Yes, the wireless light should be on, except if you have an Ethernet cable connecting the printer to the router in which case the without wire would be disabled, but the printer would operate on the network and have a wired IP address.

• OfficeJet Pro 8600 more full page

  How can I get the HP Officejet Pro 8600 more printing bleed? In portrait mode, it leaves a. 1 "margin on the right side and bottom. I went into the menu advanced and selected without border and use of photo paper.

  Thoughts?

  Hello

  Which application do you print? What is a photo/image or text? Please check the following information (from manual page is #43):

  

  Kind regards.

• HP Officejet Pro 8600 more indicates 'missing or does not print head ". I followed HP 4 instruct. Help

  HP Officejet Pro 8600 more indicates 'missing or does not print head ". I did 4 HP instructions and now I'm #4: contact HP. I cleaned the heads, replaced the 4 cartridges, removed and replaced the unit restarted, everything. Now what?

  There is a document with measures to help address the missing or condition is not the print head.  This document can be found here.

  From your post, I understand that you did some the most of these steps, but run Solution 4: replace the print head.

  If you are still in warranty, HP can replace the printer/printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• HP Officejet Pro 8600 more paper tray will not go

  [In the case of a post to repeat it is because I could not tell for sure one was actually published.]

  Product name: HP Officejet Pro 8600 more. OS is Windows 7

  First of all, I saw many possible solutions in Google search, and many of them related to the HP printers support blogs and none of them have worked for me.

  Like so many others, the problem started with my change drawer to manage envilopes. Many worked, but now the drawer don't go all the way - it stops at 9/16 inch short to be completely closed.

  I adjusted and readjusted the tray for legal size.

  I shook the left and right drawer closing.

  I removed all the paper and two sizing medium frame settings.

  I checked the track inside and the slider on the status bar and see no obstacles.

  I raised and lowered the ramp at the end; It lowers at the beginning of the slide.

  By pulling the drawer I found a slight resistance during his visit to the position of 1 inch.

  I slipped the paper-stop in and out and it positioned perfectly.

  I cycle powered by the printer.

  I can't help but think there must be simple somethinbg behind it all. Maybe a bit of lubricant in the mechanism?

  Help, please.

  I was right - something simple. Me. It seemed that the ferry was going all the way because of the gap between the drawer and the housing. I thought it was a problem because I have sent to the printer of things would not print. I still don't know why, but it seemed to be a problem with the mechanical - 'print' in applications is dimmed. But now everything seems to be in order. My apologies to those who have spent the time thinking about my 'problem'...

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• HP OfficeJet Pro 8600, HP printer wizard installs not when the software is installed from the CD

  HP Officejet Pro 8600 e printer all in one

  Windows 7

  I had Assistant printer installed and working on my computer at least a year, then there was an update and it no longer works.

  I uninstalled the device and the software and reinstalled both on-site and directly from the CD without success.

  The only error I get is when I start everything first install it and there is a red "x" next to the update of windows.

  The installation process ends, the computer will recognize the printer and I am able to print but I have no control any function because none of these options in the wizard for the printer are turned on.  They are all grayed out.   The most important thing I need is the archiving of received faxes.

  Someone else in my family had the same problem, but was able to reinstall from the Web site and doesn't have any more problems.

  Thanks for any help.

  Hi liluno18,

  I want to help you with this question. I send you this link to the Microsoft forum on how to fix the red X on windows update. Follow the response from Joseph M.

  So I suggest you do a complete uninstall software of the JO 8600 and reinstalling the software once you have windows update works again.

  Let me know if you need help, I would be happy to help you.

• My OfficeJet Pro 8600 more returns "not recognized computer" when I scan from desktop computers.

  My 8600 OJPro more has been configured to recognize my Dell computer.  What settings should I on my computer for the printer OfficeJet Pro 8600 more allow scanning from my Dell desktop?

  I would try to run printing HP and doctor Scan first to see if the problem can be solved with this automated tool.  Click here to access the tool.

  Thus, there are measures to check the WIA service:

  (1) type services.msc in the section run or search programs and files

  (2) scroll the WIA: Acquisition of Image Windows service

  (3) to ensure that this service is running.  Click on stop, and then restart to ensure that the service is running properly

  (4) restart the PC to see if WIA will resume functionality

  (5) check the properties (right click on WIA) 2 dependencies are defined

  (6) check to make sure that the remote procedure call (RPC) is running

  (7) check the detection equipment core and make sure that this forum works

  Let me know how it goes.