OfficeJet Pro 8600 N911a: N911a of suddenly unable to analyze HP

I have an Officejet Pro 8600 N911a who, until a few days ago, was fully functional on my home wireless network. I am running Windows 10 on my computer. Out of the blue, the analysis feature has become non-functional 2 days ago, give me a message on the printer that the function computer scanning was enabled on the computer. Unable to solve this problem through managing the digitization of printing software to computer section, I finally uninstalled the HP software and downloaded the full setting software and driver package on the HP site for a new installation and configuration. I have had no problem adding the printer and its connection to the network through devices and printers in Control Panel 10. As before, I can print without problem, but when I try to scan, the printer status screen informs me that the function computer scanning must be enabled via the printer software. My current situation is that when I run the printing software, it goes immediately to the printer configuration screen and then hangs on 'check the network environment,' let me do the software already installed. So it seems to me went from bad to worse, because I have more access to the software is of the other features, such as ink cartridge levels. I looked online for a solution for 2 days now without success, any suggestions would be greatly appreciated. Thank you.

Good news! Rerun the Print and Scan doctor was a complete and utter success! The printer is now on the network with full functionality restored, as well as for printing, as well as windows. Sunshyn2005, I can't thank you enough for the time and effort that you put into this! Thank you very much!!!

Tags: HP Printers

Similar Questions

  • HP Officejet Pro 8600 N911a: Default community names

    Hello could someody help me know if its possible to change the default community for all the printers?

    This is because it is considered as a vulnerability by CVE

    HP Color LaserJet CPImpresor. 3525

    HP Officejet Pro 8600 N911a

    Thank you very much

    I suspect that @jfba done refers to the SNMP community name, not the name of the printerto Windows .

    I have no idea if this can be changed on the Officejet Pro 8600 printers; LaserJet 400 Pro M475dn, the value can be changed via the Integrated Web server interface:

  • HP Officejet Pro 8600 N911a: can not save scanned documents

    button to scan save the docs is grayed out after the scan is finished and ready to save the step

    Hi @orthoman,

    Thank you for joining the HP Forums!

    I understand that you cannot save documents scanned with your HP Officejet Pro 8600 N911a printer. I'm happy to help you!

    Please take a look at this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

    Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Hope this guide helps!

  • HP Officejet Pro 8600 N911A: firmware

    I have a HP Officejet Pro 8600 N911a

    Serial No. [personal information]

    Product # CN578A

    Service ID: 23174

    Firmware version: CLP1CN1435AR

    QUESTION: Is the original firmware that came pre-installed on this printer purchased on 06/23/13.

    To be honest, I had problems with the operation of the printers over time, successfully resolved.

    I am led to understand that a later version of its Firmware is available. If that is correct, do I need?

    What are its advantages? How I did it acquire? Will receive installation instructions?

    There are further problems with the new Firmware? Thank you in advance for your help!

    ultimately, here's what happens: I had the chance to find a link on the site of "BD" that has allowed to circumvent the 'salary aid Tech' (involved only) help. For linking real chat... I got a tech, explained what was going on, he asked me to open Bitdefender a page says, asked what he's been selected... then instructed me to change about 3 settings. "BD" to close and reopen it... then try to access then asked me to test the "computer scan"... It worked like a charm! Apparently, BD software with the settings of the Moose saw an intrusion unauthorised and killed the linlk from computer to printer/scanner and killed the link.

    Once, I didn't know what to do in the future, everything worked fine... I can't tell you how many hours I spent with other BD technicians and HP is trying to solve this problem.  So, now I can place a document (etc.) on the printer scan window, go back to my computer open the link and the Voirledocument and adjust the scan size, part of the image, size and other graphic possibilities.    Because by sheer luck, I found a link to chat with a technician who knew their product and in a few minutes (not hours) directed me to a resolution that no cost me $ $ no matter what.

    Than k you, Lucien of Bit Defender!


    Message to MEG WHitman... Unload your stock, sell the House and get out of here before its TOO LATE.

    Even a deaf, dumb and blind person can comprhend this situation... Fill in the blanks...

  • HP OfficeJet Pro 8600 N911a - two-sided copies

    I'm eager to take a two originals face and make a copy of both sides.  When I press the ECO button it says that this option is disabled.  I can't understand how to turn it on.

    Hello chogan

    The ADF on the Officejet Pro 8600 N911a doesn't have the possibility to make a double-sided copy. This is because the ADF doesn't have a duplex unit to get the original in paper and flip so that the other side can be copied.

    You can make copies front and back of the dumpster by setting the option and flipping the page once the first side is copied.

  • My new HP Officejet Pro 8600 N911a does not allow a webscan

    My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

    Anyone has a suggestion to solve this?

    Hello tutoke

    The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

    1. Click settings
    2. Click the administrator settings
    3. Check Webscan
    4. Press on apply downstairs.

    Try to scan the image.

  • Addressing the memory card SD embarked on my HP Officejet Pro 8600 N911a directly from a PC

    With my 6500APlus the memory card SD has been accessed in my case as \memory_card but this syntax does not work with the HP Officejet Pro 8600 N911a. Can someone tell me what syntax will work?


    Hi deanp,.

    Follow these steps to map the card reader

    1. Insert the memory card into the printer
    2. open my computer
    3. click on network drive mapping
    4 Select the letter of the drive you want and enter the folder \\\memory_card
    5. click on finish, and the Player opens for access to the files

  • several vertical black lines trying to copy using automatic power HP Officejet Pro 8600 N911a

    30 - 40 randomly spaced verical lines length of page when you try to copy using automatic feeder

    The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 n911a.

  • Storage of an HP Officejet Pro 8600 N911a

    I have a HP Officejet Pro 8600 N911a and should not be used for 6 months. What is the best was to keep it in working condition. Is it possible to store it or should I periodically send an email to the printer using HP eprint and having the printer print a page or two every few weeks? Does anyone have any suggestions?

    Thanks in advance for your help.



    Please follow the steps mentioned in the document below.

  • HP Officejet Pro 8600 N911a will not print from Windows 8.1

    I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

    Also, there is a single instance of error code 74899

    The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

    Firmware of the printer is: CLP1CN1416AR

    Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

    What should I do next to be able to print from my computer Windows 8.1.


    Note: This is the first issue I had with this printer that was bought a year ago.

    Hello Steve, I hope you're well

    Thanks for getting back to me with your info!

    Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

    I hope that this is the solution!

    Have a great Monday!

  • HP OfficeJet Pro 8600 N911a, no PC Interface to the printer

    Win 7 Home Premium, 32-bit and 64-bit PCs, wireless connection to the printer OfficeJet Pro 8600 N911a.

    When clicking on the icon of the desktop printer, or to access the HP program in the start menu, MS Notepad opens the interface instead of the interface coding. It's a constant problem since the installation of the software in November 2012. The software has been installed on all three 3 PCs with the disc that came with the printer. All three 3 PCs suffer the same problem of no interface, only Noptpad with the code.

    I uninstalled the drivers and firmware (using Revo) completely and reinstalled from the HP Support download site. The problem remains.

    The interface of Scan function works perfectly in the start menu.

    Other than that, the printer works fine when access to it to print from the sites, as well as the printer works perfectly with all functions when using the control panel touchscreen printer.

    Any suggestions or help appreciated.


    Hi Bobhist,

    I understand that you have a 8600 Officejet which is not able to open the wizard in the printer on 3 different computers. I'm sorry to hear what is happening, but I'd be happy to help you!

    I would recommend you have a look through this HP Printer Wizard opens with an error in Script or in Notepad and you should then be able to use everything as planned.

    Hope this helps, have a nice week end

  • Beautiful copies. Print programs Officejet Pro 8600 N911a

    Just ran 20 copies without any problem. When I try to print from Access, Word, Excel, etc. printer behaves as if it's going to print, but then displays the message 'Out of Paper '. Windows 7 64-bit. HP Officejet Pro 8600 N911a. Is about to resume

    Hello raynos,.

    See if this troubleshooting article helps you resolve the problem you are experiencing.

    ' A ' Out of paper ' or 'Choose the motor at a standstill' Message is displayed and the product do not pick up or feeding the paper

  • Cannot update firmware for Officejet Pro 8600 N911a

    I can't upgrade the firmware in my Officejet Pro 8600 N911a.  My current firmware is CKP1CN1416AR.  According to the HP drivers website, the latest firmware is CLP1CN1322CR.  I get the update to run and it identifies my printer, but it won't let me select it.  I use the printer on a wireless network, but I'm trying to run the update of the firmware via USB.  Any help would be appreciated.


    Please provide information on this issue.

    Apparently, the problem that your customers have is that they are wasting their time trying to update the firmware on their printers and after a few hours of frustration they finally know that HP has a firmware update file on its Web site that has a date that is much newer than the firmware itself.

    HP should do the following to make the process less frustrating firmware update:

    1. establish dates and version numbers in the file metadata which clearly indicate what firmware file is more recent.

    2. keep the HP web site up-to-date with the latest versions of firmware.

    3 Broudly and transparent announce to the public when an update will be made and why.

    4. establish technology so that firmware can be updated on wireless links so that the networks do not have to be reconfigured to make the firmware updates.

  • CAN; t enable web service on HP Officejet Pro 8600 N911a

    N911a HP Officejet Pro 8600 that we have installed this printer as a network printer.  Everything works fine except that I can't activate the Web service to printing or scanning to an e-mail.  He says that the printer is unable to access the internet.

    Hello. Power cycle the printer and the router to see if that will clear up the error message. Do disconnect the router and then turn the printer off using the power button. Then plug the router back in and once it is up a running, turn on the printer and try to reconnect to the web services

    Then, if he is still unable to connect, I would set a static DNS on the printer. To set a static DNS, you must Access the built-in web server (EWS). Do so you by entering the IP address of the printer in the address bar of the browser of your choice.

    Once it opens your Officejet EWS, locate the tab titled 'network '. From there, look in the left column on the new page that will pop up and select IPv4, wired or wireless will depend on how the printer is connected to the network. That will bring up the page set static DNS. This will be the 2nd part of this page.

    Set the radial dial to the manual. Then, for the favorite/Primary manual DNS, set it to and the manual Alternative/secondary to; then click on apply.
    NOTE: If another message with an option to click on 'OK' is displayed, read this message. Most of the time there is an option to cancel the change you did right and you want to avoid to click on this message. Just sail away this page by clicking on another tab.
    Power cycle the printer. Once the printer is upward and through calibrations to turn on. Try again to connect to web services by touching the icon.

  • OfficeJet Pro 8600 N911A: fax wireless

    I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

    Welcome to the community of HP @BARBEO,

    I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

    It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

    HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

    If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps and have a nice day.

Maybe you are looking for

  • My screen is clicking and my phone it 2 months old

    My screen is clicking and my phone it 2 months old

  • HP Photosmart C4780 do not install (Windows 7 64-bit)

    Hello Recently, I moved to a location that does not support printer wi - fi. I bought a usb cable to connect my Photosmart C4780 to my pc Windows 7 64 bit and I tried the method of installation of HP usb but the printer could not be found. I also tri

  • Portable printer Officejet 100

    We Macbook air and macbook pro operating system is os x 10.8.2 I downloaded the drivers, but can't get them to work. I hate printers why can't they work? I have an eveny at home.  I should have make it help please.

  • Find anything when I open network connections in Control Panel.

    Original title: computer problems My computer (Windows XP) does not work, when I go into Control Panel, thennetwork connections, there is nothing there, and I don't know how to solve this problem causeThis is what reads your connection. Because I use

  • closing references - what

    Hello I have a small question on the fence of the references. When writing some programs I open usually refers to a single store location in a shift register or fgv and the usewhen I need as in case 1. Then I close the reference to the output of the