OfficeJet Pro 8600: Need universal PCL Driver c. 6.64.0.994

Similar Questions

• OfficeJet Pro 8600: Uninstalled the printer driver and now can not download it from the Web site!

  The error message "printer is off-line" showed a day all of a sudden

  I tried to download the driver of scanning and printing doctor as suggested help forum, never downloaded.

  The download (or Install) window presented with percentage bar.

  but the percentage remains at 0% for 10 minutes.

  I thought that something was wrong with the Scan Doctor

  I decided to take the alternative; uninstall the current printer driver in my computer (computer laptop HP 'Pavilion', Windows8).

  I uninstalled it then tried to download the same driver on the HP site.

  It is same as the pilot of scanning and printing doctor;

  same window, "0% download" forever.

  Now, I'm totally at a loss. Have what wrong I done?  How can I make my printer work again or how do I know what is the problem?

  The driver is big enough, I would say save to disk, and then run the installation program.  You could do a right click on the link here, select "Save as", then download the file.  Depending on your internet speed, it make take some time downloading.  If it doesn't for you please specify exactly what is happening when you try to download the file, and any error messages see you.

• HP Officejet Pro 8600 e: 8600e printer driver a bad installation of hp_io_enabler_compound.kext

  I recently did a clean install of Yosemite. I write under "OS unknown because the drop down menu stops at OS 10.8 so I couldn't choose Yosemite.

  I have a printer HP 8600e.

  There is a recurring message that says "the hp_io_enabler_compound.kext of the Extension of the system has been successfully installed and can not be used. This happens constantly, regardless of case I try to print.

  I followed the suggestions of other threads to uninstall the software, reset the printer drivers in the system preferences.

  Download the software from the HP site, install, problem persists

  I tried to repair fsck - fy in secure safe.

  I tried to delete the file, but when restarted, it is replaced, and returns the message.

  This condidion is currently doing anything on the boring computer because it is constantly interrupted by this message.

  Need help. Please suggest not all the things I've done.

  Hello

  In the error message, you will see that the exact path got the hp_io_enabler_compound.kext.

  Go to this place and set "hp_io_enabler_compound.kext" to the trash, then empty the trash, and then reinstall the software below:

  http://FTP.HP.com/pub/softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg

  Please let me know the results, which should identify such an error.

  Shlomi

• I need a printer hp officejet pro 8600 for win2000 driver

  Someone in the world has a print driver that works with a printer HP Officejet Pro 8600?

  The Officejet Pro 8600 printer does not support Windows 2000.  I'm sorry.

  However, there may be a workaround solution.  To clarify, I don't have a Windows 2000 system to test this with, and it can take a series of changes for the following steps to work with Windows 2000.  You may need to find the equivalent Windows 2000 for this process steps/formulation as it was done using Windows 7 (the process must be the same).

  It sounds weird, but the Deskjet 990c driver will work for the Officejet Pro 8600, and there's a Windows 2000 driver that is available for download.  However, Windows Update already has this driver and it's easier to use it instead to extract the executable driver and ending.

  Essentially, the printer must be added manually using the Deskjet 990c printer driver.  There may be other resources out there, but I found none on the HP site for the use of this driver instead of the Oifficejet 8600 driver. This will give you only the printing features and nothing else. In addition, there may be problems printing since this isn't an official driver for Windows 2000 for the 8600 (I have not noticed any problems when I did a few test prints).

  1. go where your printers are listed and select the option to add a printer.

  

  2. Select the option to add a local printer (maybe it's a network printer in Windows 2000).

  

  3. create a new Standard TCP/IP port.

  

  4. Enter the address of the printer in the field IP address Ip or host name.

  

  5. the selection of the pilot window should now be open.  Click Windows update will complete the printer selection screen (may take several minutes using Windows Update).  Select HP for the manufacturer and the printer Deskjet 990c for the printer.

  

  6 the name of the printer. The default value will be the deskjet 990c since it is the driver used, but I recommend to name what the printer is so that we know what it is.

  

  7. the sharing screen appears.  If you share the printer, enter the appropriate information.  Otherwise, click Next.

  

  8. at this stage, the process could be completed.  Print a test page to confirm functionality.

  

• Upgrade officejet pro 8600 PCL 3 enhanced PCL 5 enhanced via a pilot?

  Can I put an officejet pro 8600 current capacity of PCL 3 enhanced PCL 5 enhanced via a software driver? Also there are books of HP PCL 5 or PCL 3 programming?

  To add to the response of Bob Headrick:
  
  The majority of inkjet devices support only hatched Languages of Description of Page, more based on improved PCL3variants; HP does not seem to publish details of these languages (with the exception of some collaborators under license).
  
  Most LaserJet devices (with the exception of cheap ones) offer three standard s: of PDL

  • PCL5 (PCL5e for monochrome, PCL5c for color)
  • PCL6 (aka PCL XL)
  • PostScript (aka PS)

  Models cheaper LaserJet does not support the PDLs standard, but rather to use other raster "host-based" languages (for example JetReady, which I understand is based on a variant of (very) stripped of PCL XL).
  
  This link provides a brief history of the PCL language and links to technical PCL Reference and also to other PCL5 & PJL manuals manual; Be aware that some of the manuals (in PDF format) are several megabytes of downloads.

  To get the documentation for PCL XL :
  
  Go to the developer web site

  Then select the option "Public Software Development Kits.

  Then select the "LaserJet and Digital Sender" kit box.

  Then select the "printer languages |" PCL 6 | PCL 6 records"folder, which gives access to various documents PCL6 (most are in PDF format)."

• HP OfficeJet Pro 8600: Download driver for hp 8600 pro for mac 10.10.1

  I have an iMac osx 10.10.1, and I also have a HP 8600 Pro.  I need to download a printer driver but am not finding this info easily (or at all, in fact) on the hp site.  Is there a driver that works on 10.10.1, and if so, where can I find?

  Found very quickly by using the Support link above, registering 8600 in the product search field.

  My MacBook Pro with 10.10.1 prints perfectly on my Officejet Pro 8600

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-125213-3&cc=us&DLC=en&LC=en&OS=4182&product=4323659&sw_lang=

  I will also move this thread to the impression of Mac Board.

• Lack the HP (Officejet Pro 8600 Plus) utility. no need to reinstall - cannot uninstall the printer software

  I had to wipe my iMac and resinstall IOS Mavericks (10.9.5).  Printer (Officejet Pro 8600, 9N11g) works, but won't scan (double-clicking icon in "original item cannot be found") and the HP utility on dock icon is absent, replaced by a "?."  I found instructions to uninstall the printer software so I can reinstall... but there is no longer any HP or "Uninstalling HP's" on my Mac HD folder.  Not there at - it a HP folder in the library/printers folders.  Research Spotlight shows no HP or Hewlett-Packard folder on my hard drive.

  I downloaded a 'HPPPrinterDrivers3.0.dmg' and ' HP-Injket-SW-OSX - Mavericks_v12.34.37.dmg, "which I'm hoping will contain updated software/drivers to reinstall the printer and I hope as the HP utility so I can resume the scan function, but I can't understand how to remove the current printing software, and I don't know if those are the files migrate to use.  I understand just remove the printer will not be enough.

  Can someone provide step by step instructions how uninstall the software and installation (since I don't know if I have the correct dmg files)?  Thank you.

  Hello

  First I offers to repair disk permissions, and then try to reinstall the HP software.

  Follow the steps below to repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Once you are finished, run the HP-Injket-SW-OSX - Mavericks_v12.34.37.dmg and follow the instructions on the screen, be sure to select the option of Scanning HP when installing to get all the features of the software.

  Please, try the above steps and let me know the results,
  Shlomi

• Officejet Pro 8600: offficejet 8600 pro needs to reset the admin password, but it won't let me move the configuration page.

  I have recently changed service providers and the need to install my printer wireless on the new network, but I can't access the settings to do when he comes back "'feature has been locked by your system administrator or the person who setup your printer" help please! "

  Hey @kcjaydee,

  Welcome to the Forums of HP Support!

  I appreciate that you try to change the settings on your Officejet Pro 8600 e-all-in-one printer wireless. I can help you with that.

  I will send you instructions explaining how to do a factory reset on your printer. If you check your Inbox forum you should see a message shortly.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet Pro 8600: OfficeJet Pro ePrint 8600 - cannot select paper tray - HP needs to fix this problem

  This is a limitation of the software that HP needs to fix. I bought this machine multifunction largely for two features, ePrint, and two bins to paper. I had released two paper because I often need to print on paper thick and does not want to manually load the cards into the printer whenever I don't want to print on thicker paper. Unfortunately tray 2 is not compatible with card stock so I keep copy regular paper in tray 2 (tray 2 is defined as the default tray) and I keep card stock in Tray 1, which is compatible with cards. The problem and the limitation is when I am traveling and want to use ePrint. Even if my default tray on the printer is 2, which is where the paper is, if I use ePrint to print, HP ePrint by default tray 1, which means that I print on thick paper. This isn't only a problem when you travel. One of the advantages of the ePrint, in theory, is I can print on my desktop at home via ePrint printer when connected to my VPN employers. I've had this machine for two years. It seems that HP would have an update now to solve this problem. So far, nothing. Frustrating!

  Hello @HudsonOH,

  Thanks for posting in the forums of HP and welcome.

  I understand that you are not able to choose your paper tray of your HP Officejet Pro 8600 Premium e-all-in-one using ePrint. I would like to help with this, as much as I can.

  Unfortunately, when you simply send an e-mail to the printer, you cannot change the print settings, because it uses the default settings on the ePrint server.

  However, if you have an Android or iOS device, you can download the HP ePrint app. This allows you to add the printer by ePrint e-mail address and send print jobs when you are not with the computer (need you an active wifi or data connection, however). The application also allows to select print settings if you can ensure that you don't waste card stock paper you loaded in the machine.

  To download the app on iOS, simply open the app store and type 'HP ePrint' in the search bar.

  To download the app on Android, you can open the store game (or game of Google) and search for "HP ePrint.

  Once you have installed the application, you can add your printer via his email ePrint:

  1. open the ePrint application and select OK on the demo screens.

  2. Once you reach the home screen, it will show your printer name, or not find printers (depending on whether you are at home with your printer, or on the go). Select this check box.

  3. you will see a tab at the top that says all, select it.

  4. press on the + symbol to add a printer.

  5. Enter your ePrint e-mail address and select Add.

  To print using the application, return to the home screen and select an item to print one of the options listed. Note: If you are on iOS, you can even add your e-mail information in the application so that you can print emails.

  In addition, you can sign up here for updates on the new firmware and software for your printer, in which case no alternative workaround should arise: stay connected with updates from HP

  I hope this helps!

  

• OfficeJet Pro 8600 N911a: How can I determine which cartridge needs to be replaced?

  I installed an update to Windows Pro 10.  Now, I can't say what ink cartridges need to be replaced.   What happened to the apps that gave me the ink level?

  Hello

  Same software offered fow Windows 10.

  What are the results when you try to launch the HP Officejet Pro 8600 application?

  In addition, you can check the level of ink on the screen of porinter as shown below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322914/model/4323658/document/c02876509/

• OfficeJet Pro 8600 more Driver

  Purchased the Officejet Pro 8600 more a week ago. Installing Wi - Fi with my iMac OS 10.8 (Mountain Lion). Worked fine for about a week, but then I lost the WiFi with my iMac. Downloaded the latest full installation and followed the instructions from HP to re - connect wirelessly. Works fine now, but I have the Version 1 pilot. My original CD installation had Version 3.3.3 with more features. That's happened? How can I obtain the driver Version 3.3.3 back? Thank you. GNG

  Hello

  This occurs because of the use of AirPrint, add the printer with the HP driver and it should provide the same functionality.

  go to System Preferences and select printing & scanning.

  Click on the sign more and select the HP Officejet Pro 8600 list, then click the menu drop-down use and select the HP printer model default AirPrint option instead.

  Now, try to print via the newly created print queue and check for the difference.

• What is the latest version of the driver for the officejet pro 8600

  OfficeJet Pro 8600 more; MacBook Pro with the retina display

  I just connect the printer to the time my Mac Book Pro and my iMac.  On the MacBook, it displays the version 1.0 of the driver, but on the iMac is version 3.3 which is correct?  Or if the versions may be different for different computers, which run both OS X 10.8 Mountain Lion.

  Hello

  The reason you see listed 1.0 version, the Cougar the default option uses Apple's Airprint driver and not the driver HP...

  You can add any type of driver by going to System Preferences > print & scan...

  After clicking the sign more and by selecting the printer you can set the option use as AirPrint or the printer model for pilots provided via Apple Software Update...

  Kind regards

  Shlomi

• Best driver for Officejet Pro 8600 on Ubuntu Hardy

  I'm running Ubuntu Hardy (hplip 2.8.2). What is the best driver for the Officejet Pro 8600 (N911a)?

  Hello

  The 8600 Pro Officejet required HPLIP 3.11.10 version or above, I fear tha Ubunto Hardy is too old and does not support the model.

  As you can see below the device is supported only on Lucid or newer versions of Ubuntu:

  http://hplipopensource.com/hplip-Web/models/OfficeJet/officejet_pro_8600.html

  Shlomi

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• OfficeJet Pro 8600 n911g stops and you need to restart the spooler on Win Xp

  Hello

  I have an OfficeJet Pro 8600 N911g printer.  It is networked and I put the static IP address on the printer.

  I have a user with about once a day to restart the Windows print spooler service so that tasks start printing.  I loaded, uninstalled and reloaded the Windows XP drivers.

  Any thoughts on how to solve this problem?

  Hello

  Have you used the latest version of the software on the HP site?

  If not, uninstall the printer from programs > HP > printer folder and then install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=228&product=4323648&sw_lang=

  I suspect also any security program which may block the network connection (assuming that by the description of problem on a single user), temporary disable any software firewall running and check if that can cause printing to stay in spool it print.

  Try to run the HP print and Scan doctor, click on network > firewall help and make sure any firewall running is disabled, then follow Fiox print and check what is happening:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109037-2&cc=us&DLC=en&LC=en&OS=228&product=4323648&sw_lang=

  If still the same I guess rather the envoirnment of the OS, you can try running Microsoft Fixit to diagnose service print spooler for questions and automatically check if this can help:

  http://support.Microsoft.com/mats/printing_problems/

  Shlomi