OfficeJet Pro 8600 Plus: cannot connect wirelessly between Officejet Pro 8600Plus and Linksys WRT1900AC wireless router

Bought a new Linksys WRT1900AC wireless router.  Followed the steps of wireless configuration and connected successfully as verified by "results of analysis of the wireless network.  However, I am still unable to print/scan/fax.  Receive a message indicating that the printer is unable to connect to the server.

Check the following:

The blue light next to 'Wireless' suspends on printer.

The INSTALLATION of the SCREEN ON the PRINTER (after the installation Wizzard wireless):

IP address: 192.168.0.199

Network name: golfer

HostName: HPEB4DD8

MAC: 444:1e:a1:e9:40:d7

Direct Wireless: Off

HP PRINT and SCAN DOCTOR:

SSID is correct

The signal strength is 'Excellent' @ 95

Security-enabled = Yes

Security type WPA2 =

Connected = No

Frequency = 2.4 Ghz

No problem with previously connected D-Link DIR - 655 wireless router.

Seems strange that any "passesses" by the results of the wireless network Test.  Yet, still unable to connect.

Looking for any help.

Thank you

Mark

Finally a resolution...

I tried running an ePrint of New York telephone, and it worked, but still no luck wirelessly from the PC printing.

He said that the WiFi was indeed working.  So, I did a search for new firmware and found that there was one in April of this year (2016).  Downloaded and took a chance on install.  To my amazement, it is actually installed on the printer without any connection "connected".  Who told me that there is an existing wireless link.

Once the install is complete firmware, I tried to print a worksheet Excel from the PC, and it actually printed!  I have to assume there was something in the formware upgrade which allowed the router from LinkSys (WRT1900AC) to communicate fully and to work with the PC.  The router was published in 2014, so maybe it was.

In any event, everything is in fully working again.

Man y thanks to all who have shared their data entry.  I hope this could help someone with a similar problem in the future.

Thanks again!

Mark

Tags: HP Printers

Similar Questions

  • Tecra M1 cannot connect wireless

    Hello

    This new but I hope someone can help me.

    I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

    I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
    I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

    Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
    No problem connecting via a direct cable.

    Thank you

    Hello

    have you tried to connect with another machine to check if it works?
    Otherwise, I suggest the following things:

    -Disable all security features
    -update the firmware on your router
    -dhcp instead of IP´s sets the value
    -read the manual of the router, sometimes they have weird parameters

    and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

    Welcome them

  • My computer cannot connect wirelessly.

    I accidentally downloaded a windows vista edition family basic model of office on my laptop

    Now my computer cannot connect wirelessly. Now when I tried to download the cd I wanted to down load which has windows xp, it has not work it says something about the material or the floppy disk. My model laptop is a Hp Compaq 6910p. Please help me

    Dear, Mizzy2Fy4U

    Hello

     
    1. from which site you downloaded Windows vista home edition?
    2. what operating system is already installed on the computer?
    3. What is the exact error message about hardware and the floppy?
     
    You can also perform the resolution of the problems of Internet connection and check:
    See the link provided:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
  • Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

    Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

    original title: cannot connect wireless

    Hello

    ·         You get the error message?

    Method 1:

    I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Also, follow the steps in troubleshooting section and check if that helps:

    In the Windows wireless network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

    Check out these links and check if that helps

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    See also:

    Solve problems with computers not appearing is not in the network map

    Hope this helps

  • 8600 Officejet pro all-in-one: 8600 cannot connect wireless Officejet

    Unable to connect wireless when adding the printer.  I can see the IP address and the name on the report to the printer, but can not see the printer when I try to log on my computer.  It worked fine until I loaded the latest patch. It's the same thing with another 8600 and I got to the wire that one for the router to print.  This 8600 is too far from the router to run a cable (at the top). (only about 20 feet of actual distance.) I see that the printer is enabled on the router.  I tried to add the printer to the computer with the IP address and the hostname without success. We were working wireless until today.  I've uninstalled and reinstalled the driver without success.  Still do not see the printer.

    Any suggestions?

    I forgot to say that I fail to see the printer wireless to 2 separate computers - an 8.1 and other windows 7.

  • OfficeJet Pro 8600 Plus: loss of wireless connection, printer does not accept the password wireless

    My printer has suddenly lost its wifi connection. It's the only phone connected to my network to do so.

    Through the Wireless Setup Wizard to restore the connection. Assistant tells me that I entered an invalid password wireless, that is not true. (I confirmed that all devices connected to the network using the same password).

    Reset the router (Technicolor of Time Warner). Reset the printer. The 'Restore default network' done. No luck.

    Zero has changed since yesterday, when my printer was working fine. I used the same router for months, do not change any settings. Any thoughts on what may be the issue? A bad update happen?

    Thanks in advance.

    My apologies for the late reply. I managed to get this problem resolved by phone to customer service.

    The security mode of the router had to be changed to 64 WEP for wireless connection to be restored. According to Support HP, it's a common problem with the routers in Technicolor. There was no explanation as to why the printer has suddenly lost the ability to connect wirelessly when safety was created to WPA2-PSK. The network has been configured this way for more than a year.

    I have almost solved this problem on mine (I had read about changing of security in a different post), but ran into a hiccup because of Safari. For some reason, Safari prohibited access to a menu page for my router security settings. You can imagine how boring it is to look at the HP Support use Firefox to access the router and do what a mouse click more, and then I had to make the change. So, if you make this change, be sure not to use Safari to access the gateway of the router Technicolor. Use Chrome or Firefox.

  • HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

    Morning

    Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

    Thank you

    Stuart

    @StuartTunstall

    Welcome to the HP Community Forum - we are a community of fans of HP !

    It seems that your printer is not eligible.

    Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

    I also checked the datasheet for your printer and did not find any indication of instant support of ink.

    Time for a new printer HP brilliant?

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • HP Envy 4500 cannot connect wireless to the printer

    Recently I bought HP Envy 4500 printer. Connected to my router ok TP-Link3631 and have successfully printed from android phone and portable computer connected wifi but cannot print wireless from the office, running XP Pro, but allows you to print via a USB connection. Office see printer through a router using 192.168. etc and printed the report. Have tried to install the software via disc cd and internet several times, Inc. reinstall, but can not get computer to connect. Have been round and round in circles several times, also used print and scan doctor without success. It seems that the software is not fully installed. Or maybe something wrong with the network. Anyone have any ideas? Thank you

    Hi @atr345,

    I see by your post that one of the computers is not recognizing the printer on the network, but you can print by a USB connection. I can help you with this.

    Type the IP address in the address bar of Internet Explorer to see if the built-in Web page printer server load on this computer.

    Check the computer IPV4 address to see if it matches the first 3 games of the IP address of the printer.

    Go to start, type cmd in the search box, enter, then type ipconfig.
    Check the IPV4 address.
    Now, check the IPV4 address for the printer. (192.168.1.9)
    Do the first 3 sets of numbers match? (if they do not match then the computer is not on the right network)

    Try and ping the printer.

    In the same window, type ping printers (space between ping and IP address) IP address
    What are the results?

    If the available printer built-in Web server, the first 3 sets of numbers of computers had matched the address IPV4 of the printer and you could ping the printer, then try and configure the connection to printer wireless via the USB connection.

    Installation of the software of the printer for a wireless network connection.

    Please go to the first step: preparation for installation, number 4.

    If you need help, let me know.

    Good day!
    Thank you.

  • HP Pavilion g6-1371sa cannot connect wireless Internet

    Hello

    Just bought a new laptop for my son, but cannot make it work wireless (he connects very well with an ethernet cable). Have been well than all the assistants of troubleshooting, but with no joy.

    Relevant information;

    1. Network adapter updated - Ralink RT5390 - to the latest version (3.2.12.0) but made no difference
    2. The mac Get command does not show all physical addresses are connected (unless the ethernet cable is installed). IP config command also suggests that the wireless network adapter is not connected. Device Manager seems however...
    3. Have any other windows 7 (dell) laptop computers, access to the Linksys wireless router (using 802.11 g) without any problem.

    Help appreciated...

    Apologies for wasting peoples - my fault! The problem is with the security of the router, I have a list of MAC address filters that allows specified devices to connect. When I connected to the Internet, I entered the mac address that was then appear as connected but it was actually the address of the Ethernet adapter. When I added the other address (as displayed when you enter the Getmac command) then the Internet was born in life. What was slightly confused me was that address before that point showed as disconnected and only after that the connection has been established has made this change (of direction really).

    Lesson to learn - security switch router up to created this first connection?

  • Cannot connect wireless keyboard 700 v2.0, receive the error code 28.

    Original title: 700 wireless keyboard v 2.0 cannot connect to laptop

    Gentlemen.

    700 wireless keyboard v 2.0 cannot connect to the laptop, after checking the Device Manager said that "the drivers for this device are not installed. (Code 28) «,

    Hello

    What is a Microsoft Keyboard?

    Follow the steps mentioned in the article:

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    If you use try Microsoft Keyboard article below:

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    http://support.Microsoft.com/kb/838398

    Try to download the driver of Microsoft Hardware download and check:

    http://www.Microsoft.com/hardware/en-us/downloads

    You can contact the Microsoft Hardware section if you have any questions:

    http://www.Microsoft.com/hardware/en-us/support/contact-us

    Hope the above information is helpful.

  • SONY VAIO VGN-SZ28 cannot connect wireless with WPA encryption

    Hi guys

    I have a sony VAIO PC is unable to connect wireless if I have WPA and WPA2 encryption. When I decrease the security WEP device connects well. the laptop never asks the user name and password of the ad

    The type of security, I use WPA2 802. 1 x with PEAP-EAP-MSCHAPv2

    Please note the following:

    1. Wireless driver is updated to the latest version. I see EAP and WPA Press Cordless screwdriver
    2. Windows XP service pack 3 operating system

    no idea why I am facing this problem?

    Thank you very much

    Elijah

    Hi Elijah

    You can deal with a number of certificate on the laptop.

    If the wireless client is configured to use PEAP Protocol as you suggested the default setting is usually to check the certificate of the server. This would mean that you need to install a certificate on the laptop. However, there should be a setting on the client to disable the server certificate 'validate' If you do not want to (or cannot) to install a certificate on the laptop.

    See attached some screenshots.

    Concerning

    Roger

  • HP Pavilion Notebook 2247 g7: using Windows 8 - cannot connect wireless rt3290

    According to the Windows Compatibility Center RALINK rt3290 wireless driver is not compatible with Windows 8, I guess that this computer has been upgraded to Windows 7 to 8.  The computer belongs to a member of the family and seems to last 6-8 weeks is therefore more able to turn on the WIFI.  After several hours to review all the options available, I went to the Windows Compatibility Center to find that the rt3290 is not compatible with the Windows 8 operating system now on this laptop.  Y at - it a bet on day of the rt3290 to make it compatible driver or another wireless driver that can be installed to allow internet access via a pilot wireless that can be downloaded or is it necessary to connect to an external wireless router to get connectivity?  I have the opportunity to use my computer to download a compatible driver to a flash drive and then upgrade or install on HP laptop.  Someone else has solved this problem with their computer compatibility to the rt3290?

    Thank you in advance.

    Hello:

    G7-2247us came standard with the W8.

    There are W8/W8.1 drivers for this card is compatible with the W8 and W8.1.

    Try this driver... it is the most recent to W8 from HP.  It is much more recent than the one on the support page of the g7-2247.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  • Qosmio F60 - cannot connect wireless

    Hello
    Received my new modem wireless BoB today and it works fine with my desktop PC, but I contacted my FNSI iinet to help with my setup wireless for my laptop F60 & @30 minutes they tried to set up a wireless connection.

    However, my laptop for some reason won't detect my wireless network... "no connection available. They have abandoned and says its something wrong with my Toshiba / settings & I should contact technical support.

    Any ideas on where I might start?
    Thanks lantana

    Hello

    Is the WIRELESS card in your laptop listed in Device Manager correctly?
    You should try to update the driver WLAN too. The latest version, you can download on the page of Toshiba.

    If you use a MAC address filter on your router, you must disable it and the encryption as well.

  • want to 5530: cannot connect wireless

    I recently bought a HP 5530 want printer.  The printer connects to my WiFi, but the computer does not connect to the printer wireless - also, there was no included USB cord so I can't print.  Do you know how to solve this.

    Hello rebekah1,

    Welcome to the HP Forums.

    I see that you experience a problem when you try to connect the printer to your Mac with a wireless connection.

    I have some suggestions that we can try to solve this problem for you.

    First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    Please click on the following link for instructions on How to reset the printing system.

    The following link, I have for you gives instructions on how to repair disk permissions.

    Once the first two steps, please click on the last link to the HP ENVY 5530 e-all-in-One Printer series full feature software and drivers.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thanks for your time.

  • CANNOT CONNECT WIRELESSLY WITH THE PRINTER!

    I need assistance to find, how to connect wireless my Windows RT (8.1) and my HP Deskjet 2541.

    Hello

    Gow do you connect your printer now? Are BOTH on the same network? Please try to use Wndows store to install HP AiO Printer Remote.

    I hope this helps.

Maybe you are looking for

  • Envy 17 t: Bluray optical drive

    Recently ordered a new laptop and I tried to order one with a Bluray. Optics available only on new laptops to build is a DVD/CD-RW. Why HP eliminates the Bluray drive option?

  • Question of DVI/VGA

    We just bought a HP 700 emissary - 056 desktop computer to use with the projection of our church system. With our current system, we have a second video card that manages our projectors and the integrated video card works our desktop monitor. The Env

  • Cannot access controls in Windows Media Center after watching live TV

    original title: I can't find the controls for windows media center so when I watch live TV and have done I have to turn my pc off power then back to use my pc If I'm watching tv using the media library, that I need to stop and restart to be able to u

  • Windows 7 (x 16-96072) installation disc

    My hard drive crashed and I had to change it. I want to reinstall Windows 7 (x 16-96072) on my new HARD drive. I have the product key, but not the installation disc. Is it possible to get this version of win7 .iso image file?

  • Hello, I use microsoft security essential and I have a problem.

    Advising HP in my system showing me that 'no antivirus not installed in your system. At the risk of your system. «Please help...»