OfficeJet Pro 8600 Plus: cannot remove the pop-up windows deleted printer HP Pavilion p6-2014

Hello

I read the corrective action of 24/09/15 to HP Community@Felix_B to remove my HP printer previous (see the info solution reference below). He has worked to eliminate a group of print job corrupted. However, the pop-ups started continue. The two pop-ups State "there was a problem starting C:\Program HP HP Officejet Pro 8600\bin\HPStatusBL.dll. The specified module could not be found.  Can you please help me remove?

Thank you-Chuck

Re:

Solution! Re: Unable to remove my printer
Options
24/09/2015-13:32
Welcome to the community of HP @Felix_B,.

Hello
File Exploer type %appdata%\Microsoft\Windows\Start menu Startup into the address bar and press ENTER.
Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.

Kind regards
Shlomi

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8600 Plus: Officejet Pro 8600 Plus 'Sweep of Pin code function' Windows 10?

    In Win7 that I could click on start/programs go to HP, click on and he would drag with various categories which was Scan. I could then pin the shortcut to scan on my desktop or start.

    However, falls with Win10 you click on all the Apps/HP Officejet Pro 8600 most and there is nothing to see but pin all of the module that is already on the desk of the installation.

    How can I get just the pinned shortcut to scan?

    I tried directly open scan with the .exe only two that had the word scan in the programs but the scan did not open.

    Mark

    Hi @markg2,

    Thank you for showing your interest in the HP's Support Forums!

    I see that you want to create a shortcut to the HP scanning. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand how frustrating this is for you. Windows 10 has made some changes, so that the steps are slightly different from Windows 7.

    Please follow these steps as a guideline:

    1. First of all, we need to locate HP Scan where on the computer. The default location is in Program Files. For example, C:\Program Files (X 86) \HP or Hewlett-Packard.
    2. Go to (C:\Program Files (X 86) \HP or Hewlett Packard HP Officejet Pro 8600 Plus\Bin)
    3. Right-click on HP Scan, and then click send to.
    4. Left click on desktop (create shortcut) to place the shortcut on the desktop.

    For more information, see this paper:
    Create the shortcut on the desktop in Windows 10 for a program (announced)?

    I hope this information is useful. Please reply to this message with the results. Good luck!

  • Printer HP Officejet Pro 8600 Plus works but the Scanner does not

    I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

    Hi ranjisamaraweera,

    Even though I'm MVP I represent Microsoft or speak. If I can and will speak
    as I think.

    The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
    and no windows. There are hundreds of these devices that work correctly on Windows 7 if
    those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
    written correctly. Of course many older devices are not supported by their creators for later
    Versions of Windows. Microsoft passes but does not write drivers and interfaces
    Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
    Manager to see if there are interfaces and appropriate drivers.

    Many device makers do not write new drivers and interfaces for older hardware because either
    they cannot support the new methods or because they want to sell new hardware.

    Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
    Omos unique to provide the necessary compatible drivers and interfaces.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • OfficeJet Pro 8600 Plus: cannot connect wirelessly between Officejet Pro 8600Plus and Linksys WRT1900AC wireless router

    Bought a new Linksys WRT1900AC wireless router.  Followed the steps of wireless configuration and connected successfully as verified by "results of analysis of the wireless network.  However, I am still unable to print/scan/fax.  Receive a message indicating that the printer is unable to connect to the server.

    Check the following:

    The blue light next to 'Wireless' suspends on printer.

    The INSTALLATION of the SCREEN ON the PRINTER (after the installation Wizzard wireless):

    IP address: 192.168.0.199

    Network name: golfer

    HostName: HPEB4DD8

    MAC: 444:1e:a1:e9:40:d7

    Direct Wireless: Off

    HP PRINT and SCAN DOCTOR:

    SSID is correct

    The signal strength is 'Excellent' @ 95

    Security-enabled = Yes

    Security type WPA2 =

    Connected = No

    Frequency = 2.4 Ghz

    No problem with previously connected D-Link DIR - 655 wireless router.

    Seems strange that any "passesses" by the results of the wireless network Test.  Yet, still unable to connect.

    Looking for any help.

    Thank you

    Mark

    Finally a resolution...

    I tried running an ePrint of New York telephone, and it worked, but still no luck wirelessly from the PC printing.

    He said that the WiFi was indeed working.  So, I did a search for new firmware and found that there was one in April of this year (2016).  Downloaded and took a chance on install.  To my amazement, it is actually installed on the printer without any connection "connected".  Who told me that there is an existing wireless link.

    Once the install is complete firmware, I tried to print a worksheet Excel from the PC, and it actually printed!  I have to assume there was something in the formware upgrade which allowed the router from LinkSys (WRT1900AC) to communicate fully and to work with the PC.  The router was published in 2014, so maybe it was.

    In any event, everything is in fully working again.

    Man y thanks to all who have shared their data entry.  I hope this could help someone with a similar problem in the future.

    Thanks again!

    Mark

  • OfficeJet Pro 8600 Plus: Scan of the computer does not work with Win8.1 [solved: problem with USB3 Boost]

    Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual.

    Tried to use the HP printer Assistant: when I click on the button "scan a Photo Document or", I get a message "inaccessible Scanner. Also restarted the printer.

    When I try to scan from Photoshop, the system first finds the printer, but it fails to connect.

    Update HP says that my system is up to date.

    HP Print and Scan Doctor 4.2 concludes and tells the printer on the welcome panel and seems to be able to communicate with him, up to a point.

    It gives me a error 'pilot' (sorry if is not called in English - he takes over my keyboard language, which is French and says "Pilot error") and says that no communication could be created between the printer and the driver for scanning, and I have to restart the computer...

    So I did and revived the software of the doctor, who gave me the same error message. This time, I clicked on 'Ignore' and let things. He ran a "Scan" Test twice and said that everything was going well or had been repaired. But strangely nothing on the printer during these 'tests '. And in the end, as he offered to do a scan test myself, I clicked on OK and I got the error message "inaccessible Scanner" again.

    Then I did my scans on a USB key, as I have done a few times already, and has gone very well. But I'd be happy to have this function "Scan to computer" back. How?

    Thanks in advance 23. It is resolved! See to the end.

    I use McAfee (All Access - Total Protection). All green. I did some research using 'Paint', 'Windows Fax' and 'Scan' and checked all the results using McAfee: 'does detect any items that require your attention.

    Here is a series of screenshots when you run printing HP and doctor Scan:

    I click on "Scanning troubleshooting..."

    I click on 'Ignore' right now because I know now that a restart will not help, but I have already tried (see my first post).

    It seems that the problems have been repaired. And if I click on 'Scan Test', it seems too good, initially...

    But if I go on and click on "Scan", bye bye:

    Everything is the same as the first time, as I remember.

    I checked services: dependencies are OK (RPC is in the WIA Service dependencies). Both services are "Running" and "automatic". I stopped and restarted WIA. No change.

    I launched a sfc/scannow:

    Before that, I changed the USB (a new one): no change.

    AND THEN: I unplugged the USB cable connecting the port (USB3) standard (directly on the rear panel of the motherboard) and plugged into a PCI USB3 card. And all was well with the scan.

    Do you think this says something about my motherboard (Asus X 79 Deluxe brand new) or on the Officejet?

  • OfficeJet Pro 8600 Plus: restart all the days needed

    Each morning feeling breaks down until I have restart the printer.  After that, everything works normally.  My daughter has the same model with Windows 7 and having the same problem.  Only, it started a few weeks ago.  Is there a solution for this?

    Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.

    Make sure that it cannot be disabled?  Use the built-in Web server on the web to check.

  • OfficeJet Pro 8600 Plus exemplary prints with black streaks

    I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

    How can I solve this problem?

    @Imagehappy, you have the more than 8600 or a different version of the 8600?

    The reason for the question is because I want to give you a link to update the firmware.

    Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

    I really appreciate it!

    Thank you!

  • HP Officejet Pro 8600 Plus - Duplex printing problem

    I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

    He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

    Any suggestions?

    Thank you

    Hey there @operationorphan

    I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

    You can try to update the firmware: get the latest Firmware and updates

    If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

    I hope that helps!

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    See you soon

  • Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

    I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

    I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

    I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

    HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

    I consider that a resolution of the post!

  • Photo printing is blurred: HP Officejet Pro 8600 Plus

    Hello

    Recently I bought printer HP Officejet Pro 8600 Plus and I have no complaint about normal printing.

    Yesterday I bought HP Everyday Photo paper glossy and took some Photo impressions. to my surprise, I see that there are a lot of blur and a large part of the ink is taken on the photo.

    This printer really print photo printing? or I'm doing something wrong

    Output picture is very blurry, a large part of the cartridge from the printer and the ic a sensation by using ink on my fingers

    can someone help me here

    Thank you

    Load the print paper down in the input tray side.

    Many papers have print sides and not printable as paper photo and other special media.
  • OfficeJet Pro 8600 Plus fried by storm - how can I removed the ink cartridges

    A storm on the last week my OfficeJet Pro 8600 Plus feeding dish. The printer is irretrievably economic so I ordered a new printer.

    Without power, the transport of ink cartridge is stuck in extreme right position where it is impossible to remove the four ink cartridges relatively new. Ink is not cheap... would like to be able to recover the disabled printer ink cartridges but cannot understand how the cart release.

    Any sugguestions would be appreciated.

    In the end from the deceased by removving Assembly ADF/scanner printer ink cartridges. This provided access from the top to the distribution of ink stuck.  T10 Torx driver required to remove all.

    The new printer will not accept the cartridges retrieved when installing printer... had to use the "setup" cartridges in the box with the new printer.

    After you configure the new printer, however, I've been able to 'Set up' cartridges for almost new XL cartridges that I had recovered from my old printer.

  • Changing icons (or removal) on the Officejet Pro 8600 Plus touchscreen

    Is it possible to change the order of the icons on the Officejet Pro 8600 Plus touch screen? Because I do not use the fax feature, I would like to move the icon to fax to the second page. If not, is it possible to remove all the icons (like the Fax icon)? Thank you

    Sorry, there is no way to change the order of the icons or delete the icons on the display screen. I understand that you do not use this feature, but there are some cases that you decide to change your mind you over a period of time.

    If you have any other questions, feel free to ask.

  • HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

    Equipment:

    HP Officejet Pro 8600 more

    MacBook Air mid 2011

    Mac OS X Lion 10.7.5

    ASUS router DSL - N16 (new)

    I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

    My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

    Details of what I tried:

    1. Uninstalled HP software.
    2. System preferences / Print & Scan - removed all printers.
    3. On the front of the printer: you click Network and disconnected.
    4. Off, computer, printer and router.
    5. Tour of router on. The printer is turned on.
    6. Used the wireless configuration wizard.
    7. Chose my router - "Found WPS router".
    8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
    9. Turned computer on - check the connection to the router OK.
    10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
    11. Option to download and install the software of Apple-selected.
    12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
    13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
    1. Go to support.hp.com/gb-en/drivers - type in the printer model.
    2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
    3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
    4. Click the HP Installer dialog box. Ignored HP ePrint offer.
    5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
    6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
    7. Software installed with success, but still need to configure the device. Press to continue.
    8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
    9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
    10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
    11. Back to the installer - congratulations! Successfully installed.
    12. Utility HP ok - prints ok.
    13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
    14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
    15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
    16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
    17. Try Apple Image capture - no devices specified in the list of devices.

    Hello

    First, make sure you have the latest firmware installed as follows:

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

    Then, try the following:

    1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
    2. Select Network Configuration.
    3. Select direct Wireless Configuration.
    4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
    5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
    6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

    Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

    On your screenshot, it seems that your router do not transfer packets to multicast to the need...

  • How to set the Date and time on my HP Officejet Pro 8600 Plus?

    I have a HP OfficeJet Pro 8600 Plus, and I would like to know, how can I implement the time stamp that is under my printer display screen continually Jan 00 00 00:00 a.

    Thank you

    @misslady,

    HP has gone green, here's the guide you're looking for.

  • HP Officejet Pro 8600 Plus the Scanner Software

    Hello

    I'm a big fan of HP products.  My last several printers, scanners and computers were all HP.

    I recently bought the HP Officejet Pro 8600 Plus to replace an older machine with similar features (ADF, duplex, etc.).  The previous machine was also an HP printer.

    The problem I encounter is that the software appears to have been downgraded.  The software on my previous machine had the ability to automatically analyze the photos laid on the flat bed scanner in individual jpg.  With the software on this computer, it seems that I need to manually crop each image.  The options for optimization of each picture, eliminating scratches, automatically adjust color, sharpness, etc. are all gone.

    I really miss these features.  I found that I had been using a "basic" version of the software.  I installed the full version and found it a little different, but it still lacks the automatic selection of the image and image tweaks I did this inveterate of.

    Is it possible to recover these options?

    Thank you

    -MrXmas

    What I found there are some good options based on their comments, I'm not sure if they will have all the features you're looking for, but...

    http://goo.GL/Czm1

    http://goo.GL/3KUR

    I would like to know if this is useful!

Maybe you are looking for

  • Installing the SIM card

    The Lg Tablet SIM card does not fit my mini iPad 3. Do not use cell not on tablet.

  • HP mini 110-3130NR, lost/forgotten password

    I don't remember my password! I forgot actually even a setting, Ive tried all my usuals and can't get in. when I click on reset password a pop up screen saying I need removable media, but when I put a USB in nothing changes.  Is it possible for me so

  • C4750 all-in - One Printer: software for the printer driver removal

    Hey guys!  I was hoping that someone could help me with this package to uninstall. I have installed this package on the next page, but really don't need all this: HP Photosmart C4700 all-in-One Printer series full feature software and driver.  Now, b

  • PhotoSmart 6520 diagnostic print quality without shades of gray

    Have a PhotoSmart 6520 printer which worked fine for 6 months.  Used several black cartridges within 6 months. Black ink again ran and to replace the cartridge, new cartridge would not work.  Then put in another, which seemed to work at first, but wh

  • Need help to share a hard drive in vista

    How do you share a hard drive in Vista on a home network that the other network users can back up their music, photos, etc... I have 3 computers vista and and 4 Xp Pro on the network computers and all that I get a message saying "F:\ is not accessibl