OfficeJet Pro 8600 Premium: centered on the black vertical line on copy the view when using the auto doc feeder

This just started happening in the last two weeks. Whenever I have to SCAN using the ADF, a black line runs from top to bottom. I cleaned the glass to the left of the flat glass and cleaned the white strip above the glass on top of the printer that opens. The community has it any other suggestions or experience with this issue? The printer is about 2 years old.  Thank you!

I looked back through the forum and found a great Bob Headrick troubleshoot in 2008. This allows to calibrate the printer has been the answer for me. Thanks Bob!

Tags: HP Printers

Similar Questions

  • HP OFFICEJET PRO 8600 PREMIUM: access to the eprint emails

    I have an eprint e-mail address but do not know how to connect and access the messages.

    Hello

    You can't access messages through the address of HP ePrint.

    Address intended to allow printing from a remote location by sending an email to this address, it will be printed as you find listed in the section "What is ePrint" in the document below.

    You can find more info on the HP ePrint service in the following document:

    http://support.HP.com/us-en/document/c03721293

    Kind regards

    Shlomi

  • OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

    Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

    Print an entire page of the screen of the computer without problem. Printing problem just go flat.

    Hi @Wendy-needshelp,.

    Thanks for joining the Forums of HP Support for a solution to your problem copying.

    I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

    You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

    There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Mac cannot print wireless HP Officejet Pro 8600 Premium

    I have a wireless network of office with some Mac and some PC and an HP Officejet Pro 8600 Premium.   During the initial Setup, the first Mac was able to print fine, but today, he was not able to print.

    Two PC can print wireless with no problems.  Macs are struggling, but it's different for each:

    Mac #1-OSX 10.8.5) printer installed via the installation CD.  He worked for a week, then stopped working today.    I sent a print job, and he was sitting in the buffer always 0%.  He never gave an error, but it has never printed.  Then I uninstalled the printer and added via system preferences and got the message "Unable to communicate with the printer right now" while the installation failed.   However, I am able to navigate to the IP address of the printer from a browser and see all the parameters.  I am also able to scan FROM the printer to this computer, then it is certainly communication he...

    2 mac - OSX 10.7.5) installed system Prefreences without problem printer.  Sent a print error-free job, but he blocked indefinitely in the buffer to 100% and never printed.   This Mac was able to print via USB.

    We are on the same wireless network.  The printer is configured with a fixed IP address.  Any ideas?

    Hello whatkatiedoes,

    I understand your frustration I want to gather some information so that we can begin troubleshooting.

    Did you update firmware for your OfficeJet 8600 Premium? If this isn't the case, I wish that install you this, it was released 23/7/2013 click here to update the firmware.

    Also we will go forward and restore the default network on your printer, go to the front panel of your printer and follow the steps below:

    Menu Configuration > Tools > restore default settings

    Now that we have a 8600 OfficeJet updated premium and have restored the default values. I want to you now to connect wireless using the Wireless, Setup Assistant which is also found in the front panel of your printer. Steps listed below:

    Menu Setup > network > Wireless Setup Wizard

    Once these steps have been performed, you can now try to re run the installation software. Here's the direct link for HP Officejet Pro Full Feature software and driver - Mac OS X 10.8. Please let me know the result and if it was successful, I hope to hear from you soon.

    Thank you

  • HP Officejet Pro 8600 Premium - black line on pages that pass through the document feeder

    Hello! I have a HP Officejet Pro 8600 Premium. Any time that I scan, fax or copy via the document feeder a black line appears on the document created. Anyone know how to fix this?

    Thank you in advance,

    Lynn

    Hello Lynn_Fritschi.

    I see that you encounter errors of quality on your prints when you use the Officejet Pro 8600.

    Here are two links that should be useful for you. The first is to support your product page and the second is a document that explains errors output quality and the ways to solve them.

    HP Officejet Pro 8600 Support

    Vertical stripes, lines or streaks on Copies, faxes or scan

    Please let me know if they help you.

    -Chauntain

  • HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

    Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

    Help! PLEASE, I BEG YOU!

    Lacey!

    Hi @L2thaJ,

    Welcome to the Forums of HP Support!

    I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

    Is the other computer Windows 10 institutions, who works for printing on tray 1?

    It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

    You are able to print to Tray 1, when printing from MS Word or Notepad?

    Please ensure that you use the latest printer driver for your printer.

    Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • 4.3 "touchscreen of the Officejet Pro 8600 Premium could be established in the Spanish language? Help me!

    I just sent an e-mail to HP support, but unfortunately they never told me anything. I need to buy a printer for trade muy and I would like to acquire the Officejet Pro 8600 Premium, but I don't know if his screen 4.3 "touchscreen could be implemented in the Spanish language. So my question is: can the Officejet Pro 8600 Premium touch screen set up in the Spanish language? Please, ¡Anyone help me!

    Yes, you can.

    The 8600 Officejet Pro may be installed in different languages.

    I provide and example of this:

    • This screenshot is when you select the paper size for copying:

    And another example:

    • It is the main window of the façade.

    * Don't forget to click on the stars KUDOS say thank you

    * also click on the Solution button if your question is answered.

  • OfficeJet Pro 8600 Premium - paper tray automatic selection according to the size of the paper

    OfficeJet Pro 8600 Premium, Windows 7

    How to setup the printer such as when I'm sending a legal document that automatically selects the tray 2 (legal paper in tray 2). Tray 1 is the default, with letter-size paper tray. In 'device settings' Tray 1 is set to letter and tray 2 has the legal value.

    Thank you!

    Greg

    Hi Greg,.

    At present, the 8600 does not support this feature of Microsoft. Unfortunately, there is no work around. You must manually select tray 2:

    1 Ctrl + p to open the print dialog window.

    2 Select the printer of desire and click the preference.

    3. go tab paper/quality, then select "Tray 2" on the decline of the Source of the paper in the menu dropdown.

    See you soon,.

    Kimu

  • Error message Officejet Pro 8600 Premium that the drivers for this device are not installed. Code 28

    Printer : Officejet Pro 8600 Premium. model CN577A

    OS : Microsoft Windows 7 Home
    Base-64

    How your product is connected to your PC? : Network

    Description of the problem : in the Device Manager I have an error message with the

    OfficeJet pro 8600 icon - "the drivers for this device are not installed.

    (Code 28)

    There is no driver selected for the item or a set of device information. "I have

    have uninstalled and reinstalled the driver without result. The printer

    seems to work fine.

    Hello

    Yes, I would also suggest a new re-installation of the software.

  • Maximum weight of the paper for HP Officejet Pro 8600 Premium

    What is the "Maximum paper weight" represented for a HP Officejet Pro 8600 Premium model #CN577A"?

    New printer for us and I can't find the maximum weight of the paper in the instructions, plug - both in the manual or online or other sources.

    I spent more than 45-minute wait for the conversation online tech support (estimated time was listed as 7 minutes when I plugged) and abandoned.

    In our old printer (HP Business Inkjet 1200n), we could use up to 100 lb Bond (8.5 x 11 office paper).

    Thank you.

    Hello

    From the #166 manual page:

    Kind regards.

  • HP Officejet Pro 8600 Premium: HP Officejet Pro 8600 Premium e-All-in-One - N911n

    My HP Officejet Pro 8600 Premium has worked great for years, but now the problem is that then adaptation pages in black ink in the table, the copies are exposed and too slightly inked to read.

    Printing is perfect in black and color of the computer.

    The probem has to do with the top of the table side only.

    Can anyone help with a solution?

    Thank you

    4TT

    Thanks to Mitch to HP technical support;

    Solution was to turn off the device, then reconnect.

    Yesterdays failure tempary must have played with the internal settings.

    Works great once again,

    Thank you

    4TT

  • HP Officejet Pro 8600 Premium: OfficeJet Pro 8600 Premium - cannot use Gigabit Wireless N

    My OfficeJet Pro 8600 Premium only connect to my router using Wireless G even though my router is capable of Wireless-N. I connect 2.4 GHz, and all my other devices connect to my router using Wireless N without problem. This printer's specifications indicate that it is able to use N Wireless 2.4 GHz. How can I get the printer to connect to my router using Wireless N? Thank you!

    Reset the printer to the default network. Reset your router failing factory. Reconfigure your router back to your configuration. Now try to connect using WA2 - AES encryption to your SSID.

  • 6 "x 9" envelopes with officejet pro 8600 premium

    I try to print 6 "x 9" envelopes of greeting cards on my new officejet pro 8600 premium and get error message paper size mismatch. " With my old photosmart printer I was able to create a custom size envelop for this problem. But this option is not available on my new and better printer. Any ideas?

    Hi garyaw2,

    Try adding your old printer driver for JO 8600 and try to print, please follow the steps below to add a printer.

    Start > devices and printer > add a printer (available on top) > select Add a local printer (NO other options) > select Create New Port > port TCP\IP Standard select > next > enter IP address of JO 8600 (can be found by selecting the option Wireless on the front panel of the printer) > following > Select manufacturer such as HP or Hewlett-Packard and under printer select your old c309 printer and complete the wizard.

    Try to print again with prinetr selected c309.

  • HP officejet pro 8600 Premium: HP officejet pro 8600 optimal N911n-no interface to computer with win10 installed

    Hello I have a HP officejet pro 8600 premium tto e-all-in-one-N911n printer connected to a Lenovo desktop computer. I recently updated my computer from Win8.1 to Win10. I have tried to find drivers and updated the printer software for my printer. Currently, my printer will not run any computer to printer functions because I can't establish any interface between these two products. If anyone knows when there will be an update of the printer software match Win10, please inform Mr. thank you.

    Uninstall the printer and download the complete functionality for your operating system software

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322916/model/4323651#Z7_3054ICK0KGTE30AQO5O3KA30R1

  • HP Officejet Pro 8600 Premium print cover stock (67 lb) question

    HP Officejet Pro 8600 Premium

    "out of paper"

    The printer's paper. Check the paper tray and add more paper if necessary to continue printing.

    I try to print from Tray 1 cover. How to make adjustments so that it can print or is there a store bypass on this printer that I can't find.

    The sales representative told me when I bought this product I was able to print stock coverage.

    Help!

    You shouldn't have any problems with the documents in your list. You did to be sure you choose the correct paper type before printing? The product can capture not paper if the type in the tray and paper format does not match the size settings and type in the print driver. Heres how to check the paper type is defined:

    1. Return to the document that you were trying to print when the problem occurred.

Maybe you are looking for