OfficeJet Pro 8600 Premiun: deleting e-mail in scanning to e-mail option

Similar Questions

• disable the confimation of fax in Officejet Pro 8600 Premiun

  Hello

  I can't find any place to enable printing of the confirmation by fax to the wide page.

  There was a suggestion to go to Fax reports, but I don't have a Fax reports page. Fax just history, and there is no option for the confirmation of the turn off.

  Widows 8 software, Officejet Pro 8600 Premium

  Help would be appreciated, since it is boring.

  Thank you. Johann

  Hey,.

  The option for fax reports are in the configuration menu of the printer.  I'll give you the steps below to access this feature.

  • Since the premium 8600 home screen, press the RIGHT ARROW
  • Select the installation program on the screen
  • Select reports from the list (maybe scroll on the screen)
  • Select Fax reports out of the list that appears
  • Select Fax of Confirmation and turn it off

  This help to solve your problem?

  Jason

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• OfficeJet Pro 8600 more. No menu auto scan when loading documents in the ADF?

  I have an Officejet Pro 8600 more again to replace the L7780 who brought up the menu scan, when a document is loaded into the autofeeder.  How can I get the only 8600 to do the same.  I find that I liked the convenience of the automatic menu, but it does not come to the top when I load the document (s) to scan in the ADF.  This feature has been discontinued?

  Thank you.  I do enjoy the printer but miss this feature that I scan all my documents in my computer to avoid to keep a lot of paper.

• HP Officejet Pro 8600 - black lines when copying, colored scanning lines

  Hello

  I have a HP Officejet Pro 8600. When I try to copy from glass, copy of ADF, I get black lines going the length of the pages. Whenver I scan, once more, the glass or ADF I get lines colored, ranging from the length of the analysis. I called HP customer service and the representative told me clean the glass and part inside of the ADF, but the problem still remains. No idea if this is a common problem? More important still, how fix it.

  Do a hard rest on the printer. Let the printer and unplug the power cord. In doing so, it will remove the lines.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

  Valerie, printer Agent

• OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

  With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

  Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

  Thank you to help you solve the problem!

  Hey mk75053,

  Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

  I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

  I hope this helps.

• OfficeJet Pro 8600 Plus N911G: Cannot use the Scan to PC, option on my printer

  I recently updated from Windows 8.1 for Windows 10 and had to reinstall my printer drivers and software.  Since doing so, the office of my printer scanning function did not work.

  When I use the option on the printer, I get the message that no computer I'm done to open the HP printing software, select the scanner actions and select manage the scan of the computer.  The only thing is that twhen, I go to the HP folder in my Start menu, there is no installed printer HP software.

  I went to the page support and download the complete software solution for my printer and ran the installation, but I still do not have anything that will allow me to select the actions of scanner, and then select manage the scan of the computer.

  I even tried to use HP Print and scan v4.7 doctor.  He said full software solution is not installed on my computer and it gives me a button to click to download the software, and it is said that it downloads all the 123 file meg, then it gives me an error download failed message and offers try again immediately, but it fails every time.

  My printer is connected to my PC via my WIFI router.

  Hey there,
  Try the next step, I believe that this will help you overcome the problem.
  1. remove the printer driver of "devices and printer" which is located in Control Panel.
  2 Download this file (http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe), which is the solution full HP JO 8600 series.
  3. extract the contents of the file.
  4. open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called "RemovePreInstalledDrivers" > once you open this file black screen opens, wait for it to close, then move to the next step.
  5. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  6. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
  7 start the installation, choose the wireless option.

  Who should add the scanner to your imaging devices.
  Best Of luck ~

• OfficeJet Pro 8600: How to stop a current scanning application

  While trying to scan a new document, I get an error message saying that the scanner is in use.  How to stop an open scanning application.

  Hello
  
  Thank you for using the HP Forums. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not help, we recommend uninstalling and reinstalling the software FULL of features.

  Hope that helps.

• OfficeJet Pro 8600: Backup does not work after scanning.

  Once I scan a document, any backup option is selected (JPEG, PDF, TXT, etc.), check the button remains greyed out, leaving the only option to cancel and exit without saving changes. It was working fine until I upgraded OSX 10.11 to macOS 10.12

  Hello @RSofNJ, greetings!

  Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

  I see you are using a MAC Sierra and encounters a problem during analysis.

  I recommend you to try to use easy to analyze in the MAC Sierra HP scanning app. Go to http://hp.care/2dVzZC9 for instructions on how to download and use the easy scanning HP application.

  Please let me know if it works for you. Nice day!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet Pro 8600 N911g: MAC 10.11.2 SCAN TO COMPUTER don't WORK DO NOT OFFICEJET 8600

  I have upgraded to Mac 10.11.2 yesterday evening.  Now, I get this error.  Tried to reinstall the software and restarted the router and the computer to the printer, tried with wifi and LAN.  I guess it has to do with the update.  I can scan the Mac, but NOT the printer to the Mac.

  

  The USB cable is a successful work around.  LAN and WIFI gve the question

• HP Officejet Pro 8600 Plus: establishing an overview of scanning

  Is it possible to install my printer so that when I scan my computer and save in JPEG, the Scan preview screen will come so I can adjust my range before sweeping it records on my computer?  So far, the only time where I can make up the preview screen and adjust the size of my analysis of the area of the photo is when I open the program HP Print & Scan Doctor 4.7, which is a bit of a pain?  When I bring the HP embedded Web server program it doesn't give me that tab Scan - Webscan, that gives me an overview but I can not adjust the scan, it wont let me register only.

  Unfortunately, I'm went to the site of Photo Creations & downloaded the program.  Now, my computer is infected with any malicious & pop ups software.  A good option for me, still did not work to get rid of the damage on my computer.  Going to stay just with the HP Print & Scan program doctor.  It's a bit of a pain, but at least I know it works.   Thanks anyway those who tried to help me.

• thin horizontal black line down page what scan on HP Officejet Pro 8600 more

  I've owned an HP Officejet Pro 8500 and scan was perfect.  I recently bought a HP Officejet Pro 8600 Plus.

  When I scan from the ADF HP 8600, I get a thin (several pixel wide) black along the lower edge of the analysis that results.  This line will be sometimes slightly twisted or appear only through half of the page, in which case, it tends to become thicker towards the edge of the page).  According to me, this line is an artifact of the analysis of the edge at the bottom of the original document.  I think it is to show where the bottom edge of the page was when parsing.  If the document is that a little offset, then the black line down will be a little twisted, probably following the edge of the page.  This issue is consistent and reproducible.  It is in the mode "Scan mail" and in mode 'Scan To Network Folder.

  When I scan from the flat bed, I get a very narrow black line along the side of the analysis resulting very superior, but the background seems in good condition (although I have not tested this widely).

  These fine black lines occurred when scanning the HP 8500.

  I wonder if there is a setting to adjust it, or if it is a firmware difference between printers needs debugging.

  Hey KenAlker,
  
  There are a few things I want to check if you have lines when scanning using the 8600. I see that mention you that lines appear both through ADF and flat glass. There may be something both of the glass sections used by this printer, but more often that otherwise, this isn't the case.
  
  I would check if the printer is connected to a surge protector. If this is the case, then try plugging the 8600 in a direct outlet. Often the surge protector can cause this problem appears because the printer has a built.
  
  Also, try a hard reset:
  * Unplug the unit while the
  Disconnect the other end of the wall socket direct
  * Wait 30-60 seconds
  * Plug the unit to the top
  
  Also, try to take a look at the steps in the document found here.
  
  I hope this helps.

• HP officejet pro 8600 more: double side id or copy scan

  Hey,.

  I have hp officejet pro 8600 and I'm unable to scan or copy id cards on both sides.

  y at - it an option for scanning on part and other identification cards or copy bothh sides of ID card?

  can you please help me with it, because I really scan identity cards, the two side to my computer.

  "" and if there is no video or tutorial on scannig or copy on both sides of the identity card for "hp officejet pro 8600 more ' and then share it with me.

  Thanl you.

  Hi @Sanky1,

  While the document feeder allows the 2 sided copy and scan, the loader will feed not IDENTITY cards. What you can do, is copy each side individually, then put two copies on the document feeder and scan 2 faces. If you want both sides of the card on a single page, same idea, copy both sides individually, then place them copies on the glass to scan so that they are aligned with a scanned page.

  I hope this helps. If you need further explanation or assistance, let me know.

• More OfficeJet Pro 8600 - Question scan

  Hello

  I recently bought a new HP OfficeJet Pro 8600 Plus printer.  When I scan a document, it is automatically saved in the folder "My Documents" on my PC.  Is it possible to redirect the scans to another folder?

  Thank you

  You can change the target to be analyzed as follows:

  1. From the desktop, click the HP Officejet Pro 8600 .
  2. In the framework Of Actions of Scanner, click scan a Document or Photo.
  3. Select the shortcut used to scan from the left pane, and then click Advanced settings.
  4. Enter the Destination tab.
  5. Click Browse, select the target location to save, and click OK.
  6. Close a window of the HP software and try scanning using the modified shortcut, the analysis should be save into the configured location.

  I also provide information on how to scan on the control panel.

  Please see click on hyperlink below:

  http://support.HP.com/us-en/document/c02921272

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP. The answer is my personal opinion and not HP

• Multi-page scanning on Officejet Pro 8600 with bucket

  I had to replace a process of multi HP 6400 series with HP Officejet Pro 8600. With the old software that he would ask if there was other pages when you use the flatbed scanner option. I can't understand how to do this using the new software and it automatically creates the file after the 1 page. Any advice would be appreciated.

  Hello

  You can scan multiple pages in the flat glass using the HP scanning software.

  Open the HP Officejet Pro 8600 software and click on the Scan option document or photo.

  Select PDF, check the box show the preview and the resolution defined as 300 dpi or less.

  Click a Scan and use the button Add Pages to add extra pages.

  Shlomi