OfficeJet pro 8600 print a single vertical black line when using the charger

Similar Questions

• black vertical line when using the charger on my HP 6500 E709n

  When you use the loader on my HP 6500 E709n, I get vertical black line in the middle of the page.  It appears on outgoing faxes just like any time I copy or scan.  He can't if I lay the originals directly on the glass, only when you use the charger. I am new to this forum (or any forum also), but I looked at the messages about similar problems with other models, but have not found a solution.  Can someone help me or point me in the right direction to find an answer?... Thank you!!

  See post from 20/09/11... It must be gently the magazine cover to reveal that the slot of the animal auto scan and clean only...

• HP Officejet Pro 8600: Printer does not print in color

  I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

  Hi @monitons,

  Welcome to the Forums of HP Support!

  I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

  To determine the cause, I would like to use this document:

  • Fixing poor print quality

  If the problem persists, I suggest you try a new complete set of ink cartridges.

  How many times have you filled out the ink in these cartridges?

  TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• OFFICEJET PRO 8600: PRINTING BLACK AND WHITE ONLY

  Printer does not print in black and white only, even if this option has been selected by "Printer properties" or "Printer Preferences".

  Please read this post then provide some details.  There the error messages on the computer screen or the printer?

  The Officejet Pro 8600 series has separate heads for printing and ink supplies.  To protect the print head of damage the printer requires all inks to be present to print in black only.  If one or more of the inks are exhausted, they must be replaced to allow printing.

• OfficeJet Pro 8600: Officejet Pro 8600 copies are almost completely black

  Copies of the Officejet Pro 8600 are almost completely black.  The party central - perhaps an ich in width - is somewhat readable.  Printed documents are okay. This printer is 2.5 years old and worked fine in what concerns all the until today.  Thank you.

  Hello @Tim1943 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you use in the copy output problems.  I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest you then plug the power to the printer into a different wall outlet.

  Another recommendation would be updated the firmware of the printer:

  Printer updates for HP Officejet Pro 8600 (N911), 6600 (H711) Officejet and Officejet 6700 Premium (H711) e-all-in-One Printer Series

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Problem with HP Officejet Pro 8600 printer - HELP Please!

  Help!

  I installed a new set of cartridges (black and color) in my printer HP Officejet Pro 8600 today and now it won't print a document.  I did everything I knew to do that isn't much.  I even uninstalled and reinstalled the printer without success.  I am a 71 year grandmother, who is working on a project for my grandson.  A kind person out there in cyperspace could you please give me some advice on how to restore my printer?  Thank you! Sharon-

  I'm so bad that down below where I have to select a category, I don't know even what to check, because I don't think my problem apply to one of them.  It's just a problem with a printer.  Will you please excuse anything I check because I do not know and there is no "miscellaneous" category

  Thank you very much for the reply.  After "fiddling around" with the cartridges, uninstalling and reinstalling etc, I finally got to work.

  Thanks again for your response!  I appreciate your time!

  Sharon

• OfficeJet Pro 8600 print Face down

  OfficeJet Pro 8600 n911a 8 32-bit Windows

  It seems that if I print a single page with automatic duplex printing disabled, the printed page is put in the face of to the top output tray.  If I do the same with duplexing on (back long edges), the page is placed in reverse.

  Is this normal or preventable?

  Hello

  I don't know why your old printer make this but all 3 printers (from 3 providers) at home do the same thing and I can access dozens more by other sellers to work and they also do the same thing.

  Forward, thinking to print documents pages MULTI 2-sided, if all are facing upward, you must sort the documents by hand unless you print last page first.

  Kind regards.

• HP Pavilion: validation of the officejet pro 8600 printer failure

  I am connected to my Officejet Pro 8600, can be seen in the list of printers, I can send documents to the queue print - but when I try to complete printing, he seeks the printer and I get the message "printer Validation failed."  Help, please!  It works perfectly fine on other laptops in the House.

  Hi @CAAJ,

  Thank you for joining the Forums of HP Support!

  I see that you have installed the printer, but it still won't print. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.
  What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?

  If the problem persists, try the steps in this guide:

  • Print jobs stuck in the print queue (Windows)

  I hope this information is useful. Please reply to this message with the results. Good luck!

• How are added to the HP Officejet Pro 8600 printing solution Center

  The center of printing solutions shows my Photosmart C5580.  No idea how to add an OfficeJet Pro 8600?

  Shlomi Hi and thanks for a quick response.

  I had hoped to add 8600 Solution Center as an HP upgrade / download link in the menu Wizard printer you mention using the icon, re - set the default printer for the "8600 Fax.

  He also changed the list of this menu screen to be only four: HP printer Asst (but does nothing when a click), Set Prefs, see what printing and the printer to customize.

  Previous menu, as you no doubt refers, had several printer features that included all submenu links functions, I used (including to scan a doc, preferences, etc.).  Frustrating...

  After uninstalling and reinstalling, tweaking, etc, I always have this quick menu by clicking on the icon of tune.  I have tried different methods of scanning as the right click on the printer in Control Panel devices, but the scanning from which lead to a horrible list of basic functions, a confusing list of formats, etc.

  Finally, I did a scan in the screen menu of the printer who made a point "scan" in the Start Menu, I right click it to pin that on the Start Menu, then created a new shortcut on the desktop with the path to him... and now the icon / printer works to get the menu scanning.  Phew!

  About the loss of the Solution Center is regrettable.  Very handy tool to do the various tasks and the refinements of a scanned document that do not exist in the limited functions / buttons on the 8600 scan menu results.

  At the same time and while I'm... To the laserjet subject large workhorse of HP LJet 1320, several other positions and all forums have problems loss of functionality after passage from XP to Win7.  I finally got all but one device works (PCL6/5th, printing on both sides, etc.), but the pilot is only 600 dpi quality close to the project, instead of the prior 1200 dpi (especially good for forms, thin fonts, etc..).  Which is just a discharge on the technology and support for the products that brought me as a customer to use HP in the first place.

  Thanks again for your reply and your suggestions.  Ready to try anything to solve the so-called reliable downloads / upgrades.

  Best regards...

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet pro 8600: printer works fine, but the software is not

  Printer works fine.

  However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

  In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

  

  Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

  Connection to the wireless printer.

  All these functions work fine if I call them from the physical control on the front of the printer Panel.

  I don't know if these are two separate issues, or the two aspects of the same problem.

  Any thoughts?

  Thank you.

  Hello

  Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

  http://support.HP.com/us-en/document/c03640384

  You can see any difference?

• HP OFFICEJET PRO 8600 PRINTING GIBBERISH AT WINDOWS STARTUP

  Hi all!

  My name is Steve and I have a question. I apologize in advance if I'm duplicating this question from another thread.

  Our office has 3 computers connected to a router. The HP Officejet Pro 8600 is connected to the network. There is a problem with 2 of the calculated.

  The question is then 2 3 computers (1 running XP Professional, 1 running Windows 7 Professional are booted up (off) to the printer start printing gibberish and going to print until its cancellation.) Printing will start until Windows has loaded the login window (user account screen).

  Any suggestions? The major functions of printer for everything else.

  Hello

  We use the same previous printer cable. However, we can certainly try another cable. There is no problem printing with any of the programs that we use with the exception of one of them, (known compatibility issue).

  At this point, we don't know if the gibberish that prints to the windows startup is a problem with windows or perhaps the network.

• Officejet Pro 8600 printing problem

  I bought my Officejet Pro 8600 on 4 June 2014. I use windows 7-32 bit, everything worked fine until June 25, when I got an error message when you try to print saying "unable to communiucate with printer. I ran out and the printer worked again. On June 27 the same message, but his time of 8 hours of troubleshooting has not solved the problem. During a clean reinstall everything if fine, green all ticks, then all at once the connection is lost, managed to print a document during this time, but then print to square 1. Sometimes the software automatically detects the Lan connection and sometimes I have to put the IP address but two methods fail after a short time. I closed my firewall, but that made no difference. Talked to my son who is a computer expert and it is strange to have the same problem with its HP printers, which it has failed to resolve yet. I am 72 years old and have reached the point of despair that nothing seems to work and I've only had the printer for 3 weeks, that I would really appreciate if you have a solution. cordially 2dx

  2DX

  You run any type of anti-virus program?

  Create a new TCP/IP port with the static IP address assigned to the printer.
  Do not use the Port of discovery of HP created by the installation of the printer driver.