OfficeJet Pro 8600: Printing photos - too yellow

Hello

Whenever I try to print photos from my Mac to my officejet pro they have too warm/yellow.  I calibrated my monitor with a Spyder Elite 4.  Yes I know there is a difference between the light reflected and planned but this yellowing is great, people are not 'tired' looking - they grow soured range...

Is there a way to specify the way a different ICC when printing on a Mac?  I'm trying to print from Lightroom CC edition is of no importance.

Thank you.

Hello

Finally understood my problem.  My problem is that my monitor while it is calibrated, was not accurately reflecting the white balance of the picture.  Thus, while the photo looked GREAT on my screen, it was distorted "hot" which appeared in print.

White balance setting solves the problem.

Tags: HP Printers

Similar Questions

  • HP Officejet Pro 8600: Printer does not print in color

    I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

    Hi @monitons,

    Welcome to the Forums of HP Support!

    I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

    To determine the cause, I would like to use this document:

    If the problem persists, I suggest you try a new complete set of ink cartridges.

    How many times have you filled out the ink in these cartridges?

    TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

    Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

    I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

    Hi @Procats,

    Welcome to the HP Forums!

    I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

    Please, try the following steps:

    Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.
  • OfficeJet pro 8600 printer-how to make this program work and installation?

    I have problems printing. I wonder how to ste it to the top and do work.

    Moved from feedback

    Original title; printer Officejet pro 8600

    Hi David,

    1. what operating system is installed?

    2. what security software is installed?

    You can go through the printer manual to know how to set up the printer and make it work.

    You can also refer to these items and check if that helps.

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

    http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • OfficeJet pro 8600 print a single vertical black line when using the charger

    OfficeJet pro 8600 print a single vertical black line when using the charger

    Hi @realestatejeann,

    I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

    Vertical stripes, lines or streaks on Copies, faxes or scans.

    If you need help, let me know.

    Good day!
    Thank you.

  • HP Pavilion: validation of the officejet pro 8600 printer failure

    I am connected to my Officejet Pro 8600, can be seen in the list of printers, I can send documents to the queue print - but when I try to complete printing, he seeks the printer and I get the message "printer Validation failed."  Help, please!  It works perfectly fine on other laptops in the House.

    Hi @CAAJ,

    Thank you for joining the Forums of HP Support!

    I see that you have installed the printer, but it still won't print. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.
    What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?

    If the problem persists, try the steps in this guide:

    I hope this information is useful. Please reply to this message with the results. Good luck!

  • How are added to the HP Officejet Pro 8600 printing solution Center

    The center of printing solutions shows my Photosmart C5580.  No idea how to add an OfficeJet Pro 8600?

    Shlomi Hi and thanks for a quick response.

    I had hoped to add 8600 Solution Center as an HP upgrade / download link in the menu Wizard printer you mention using the icon, re - set the default printer for the "8600 Fax.

    He also changed the list of this menu screen to be only four: HP printer Asst (but does nothing when a click), Set Prefs, see what printing and the printer to customize.

    Previous menu, as you no doubt refers, had several printer features that included all submenu links functions, I used (including to scan a doc, preferences, etc.).  Frustrating...

    After uninstalling and reinstalling, tweaking, etc, I always have this quick menu by clicking on the icon of tune.  I have tried different methods of scanning as the right click on the printer in Control Panel devices, but the scanning from which lead to a horrible list of basic functions, a confusing list of formats, etc.

    Finally, I did a scan in the screen menu of the printer who made a point "scan" in the Start Menu, I right click it to pin that on the Start Menu, then created a new shortcut on the desktop with the path to him... and now the icon / printer works to get the menu scanning.  Phew!

    About the loss of the Solution Center is regrettable.  Very handy tool to do the various tasks and the refinements of a scanned document that do not exist in the limited functions / buttons on the 8600 scan menu results.

    At the same time and while I'm... To the laserjet subject large workhorse of HP LJet 1320, several other positions and all forums have problems loss of functionality after passage from XP to Win7.  I finally got all but one device works (PCL6/5th, printing on both sides, etc.), but the pilot is only 600 dpi quality close to the project, instead of the prior 1200 dpi (especially good for forms, thin fonts, etc..).  Which is just a discharge on the technology and support for the products that brought me as a customer to use HP in the first place.

    Thanks again for your reply and your suggestions.  Ready to try anything to solve the so-called reliable downloads / upgrades.

    Best regards...

  • OfficeJet pro 8600: printer works fine, but the software is not

    Printer works fine.

    However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

    In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

    Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

    Connection to the wireless printer.

    All these functions work fine if I call them from the physical control on the front of the printer Panel.

    I don't know if these are two separate issues, or the two aspects of the same problem.

    Any thoughts?

    Thank you.

    Hello

    Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

    http://support.HP.com/us-en/document/c03640384

    You can see any difference?

  • HP OFFICEJET PRO 8600 PRINTING GIBBERISH AT WINDOWS STARTUP

    Hi all!

    My name is Steve and I have a question. I apologize in advance if I'm duplicating this question from another thread.

    Our office has 3 computers connected to a router. The HP Officejet Pro 8600 is connected to the network. There is a problem with 2 of the calculated.

    The question is then 2 3 computers (1 running XP Professional, 1 running Windows 7 Professional are booted up (off) to the printer start printing gibberish and going to print until its cancellation.) Printing will start until Windows has loaded the login window (user account screen).

    Any suggestions? The major functions of printer for everything else.

    Hello

    We use the same previous printer cable. However, we can certainly try another cable. There is no problem printing with any of the programs that we use with the exception of one of them, (known compatibility issue).

    At this point, we don't know if the gibberish that prints to the windows startup is a problem with windows or perhaps the network.

  • OFFICEJET PRO 8600: PRINTING BLACK AND WHITE ONLY

    Printer does not print in black and white only, even if this option has been selected by "Printer properties" or "Printer Preferences".

    Please read this post then provide some details.  There the error messages on the computer screen or the printer?

    The Officejet Pro 8600 series has separate heads for printing and ink supplies.  To protect the print head of damage the printer requires all inks to be present to print in black only.  If one or more of the inks are exhausted, they must be replaced to allow printing.

  • Officejet Pro 8600 printing problem

    I bought my Officejet Pro 8600 on 4 June 2014. I use windows 7-32 bit, everything worked fine until June 25, when I got an error message when you try to print saying "unable to communiucate with printer. I ran out and the printer worked again. On June 27 the same message, but his time of 8 hours of troubleshooting has not solved the problem. During a clean reinstall everything if fine, green all ticks, then all at once the connection is lost, managed to print a document during this time, but then print to square 1. Sometimes the software automatically detects the Lan connection and sometimes I have to put the IP address but two methods fail after a short time. I closed my firewall, but that made no difference. Talked to my son who is a computer expert and it is strange to have the same problem with its HP printers, which it has failed to resolve yet. I am 72 years old and have reached the point of despair that nothing seems to work and I've only had the printer for 3 weeks, that I would really appreciate if you have a solution. cordially 2dx

    2DX

    You run any type of anti-virus program?

    Create a new TCP/IP port with the static IP address assigned to the printer.
    Do not use the Port of discovery of HP created by the installation of the printer driver.

  • Problem with HP Officejet Pro 8600 printer - HELP Please!

    Help!

    I installed a new set of cartridges (black and color) in my printer HP Officejet Pro 8600 today and now it won't print a document.  I did everything I knew to do that isn't much.  I even uninstalled and reinstalled the printer without success.  I am a 71 year grandmother, who is working on a project for my grandson.  A kind person out there in cyperspace could you please give me some advice on how to restore my printer?  Thank you! Sharon-

    I'm so bad that down below where I have to select a category, I don't know even what to check, because I don't think my problem apply to one of them.  It's just a problem with a printer.  Will you please excuse anything I check because I do not know and there is no "miscellaneous" category

    Thank you very much for the reply.  After "fiddling around" with the cartridges, uninstalling and reinstalling etc, I finally got to work.

    Thanks again for your response!  I appreciate your time!

    Sharon

  • OfficeJet Pro 8600 - Print margins are off, slow and noisy printing

    I have problems printing my printer HP Officejet Pro 8600. When I am able to print the process is extremely slow and the printer made a lot of noise before and during printing. In addition, the margins are off compared to those on the document itself. The left margin is so great that it is cut a part of the document on the right side. I tried to unplug and restart the device and it is set back to the factory, but the questions remain. I printed a test page and it looks good, but speed, noise and margins continue to be a problem. How can I fix these problems?

    Thank you!

    What you mentioned, it seems that something is happening with the material. Here are two links to try to fix it, please choose the one that corresponds to the computer you have

    Slow printing in Windows: hardware issues

    Slow printing in Mac OS X 10.4 and later versions: printer problems

  • HP Officejet Pro 8600: Printing of custom formats

    I try to print my wedding invitations.  The documents are WORD documents and they are not your standard size models.  For example, one is 5.85x5.85 but when I print them I get the error of mixmatch.  How do I get my printer to use a custom paper size?  Will be a sad day if I can't print my invitations.

    Help, please.

    Alex

    [email protected]

    Hi @SouthernFried and welcome to the Forums of HP!

    I see you are having problems printing of your invitations. I'd be happy to try to help!

    I'm including a list of the formats supported for this printer paper:

    Specifications for series printer HP Officejet Pro 8600 e-All-in-One Series

    Also, I recommend the following on:

    Create paper formats in Windows 7, Windows 8, and Mac OS X

    Invitations, they have any kind of border on it pre printed?

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • OfficeJet Pro 8600 print Face down

    OfficeJet Pro 8600 n911a 8 32-bit Windows

    It seems that if I print a single page with automatic duplex printing disabled, the printed page is put in the face of to the top output tray.  If I do the same with duplexing on (back long edges), the page is placed in reverse.

    Is this normal or preventable?

    Hello

    I don't know why your old printer make this but all 3 printers (from 3 providers) at home do the same thing and I can access dozens more by other sellers to work and they also do the same thing.

    Forward, thinking to print documents pages MULTI 2-sided, if all are facing upward, you must sort the documents by hand unless you print last page first.

    Kind regards.

Maybe you are looking for