OfficeJet Pro 8600 will not feed photo paper. post 'message of paper '.

Similar Questions

• OfficeJet pro 8625: officejet pro 8625 will not accept photo paper

  New printer works fine on standard paper.  It does not (food) photo paper.  I just replaced same 8600 model who would accept the photo paper.  Any thoughts?

  Thank you

  Hi @halrms.

  Welcome to the Forums of HP's Support. I understand that your printer does not feed photo paper.

  Do you get any error messages?

  What is the size and the density of photo paper?

  May be that the paper is not loaded correctly. HP Officejet Printers - loading paper, envelopes

  I await your response.

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet Pro 8600 (CN578A) will not feed photo paper.

  New N911A will not feed paper tray default photo. It gives an out of paper message. Regular paper feeds very well. The optional feeder is not installed (I have not). This is a brand new, out of the box machine replacing a C7280 with failure of distribution of ink. I used this article to all my printers previous HP with no problems. This is HP Advanced Photo paper (66lb/10.5 mil, sense of self)

  Just got off the phone with HP... my printer BRAND NEW so... Remove the tray paper... tip top printer has left... using a clean t-shirt... Clean the gray rubber roll... a little... hard paper will feed properly...

  That is all... should not have to do, BUT it's best that packing this f * er on the rise and water and the ascent to Costco...

  have a nice day

• Now my HP Officejet Pro more will not print Photos or anything else!

  Here I am once more.  I finally solved the problem that I had been downloading the software for my HP printer after that I downloaded Windows 10.  I could not download any software without getting an error message 'download cancelled '.  I was able to print pictures and letters typed with WordPerfect X 6.  I'm embarrassed to say that I accidentally fell into the solution and now I can scan, send faxes again.  Yay!  Problem is NOW, I'm more able to print photos, or anything else!  I go through all the motions and send the message to the printer to print, but nothing happens.  I have already run the hppiw.exe and configure the printer.  When I try to run the HPPSdr.exe, he unzips the file, the printer appears as "installed" and click on the 'Next', I get a screen with 3 different ways to connect the printer to my computer - I choose USB because it'S the way I was connected.  Then I get a message telling me to do that my printer is on (it is)!  and try a different USB port (I have) or try another USB cable (I HAVE!)  OK, so FINALLY I get to the point where I am able to print on a HP Officejet Pro 8600 N911g series Print Page of Diagnostic quality, AND DOES IT!    But I also know there is a problem with the software and I need to uninstall and click the Support link and the Driver to download new software.  But when I click on the link, I'm told I'm not connected to the internet - here we are again.  I'm exhausted.  I am 65 years old and I've been at this for 96 hours.  I've corrected the problems of scanning, but now I can't print while yesterday I was able to do it!   Arrrrggggghhhhhh.

  Can someone tell me why I get the message 'not connected' when in fact I AM connected to the internet?  sigh/smh

  Hi @Galego,

  Welcome to the HP Forums!

  I see that you can not print with your HP Officejet Pro 8600, on 10 of Windows, and I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Then, run the HP print and Scan Doctor to verify that everything works.

  I hope these steps help!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• C309G. Will not feed photo paper and give the message of paper jam.

  Using 8.5 x 11 photo paper that he will feed not and I get a message that there is a paper jam.  I can then turns off the printer and it will be by himself through the paper and eject it.  If he he'll come when I close it took off why it won't pick it up and print.  I cleaned all rollers with distilled water.  I had the printer a couple of years and it has always worked well.  It is a new problem that has just begun.  Nothing has changed.

  I sent the steps to your Forums HP box.  Let me know how it goes.

  Good luck!

• HP officejet pro 8000 will not grab the paper - paper jam flashing guard

  ADVICE ON GLADE

  There is a document with steps to help correct an error of jam on Officejet Pro 8000 light. This document can be found here.

• HP officejet pro 8600 will not print documents

  Printer is set up with Wi - Fi. When I try to print documents system does not see printer, even if it appears as a device in the Control Panel has Windows 7 Home Premium.

  Hi Tombuck,

  I see that you are having problems with your printer.  I would try to help from Hp print and Scan doctor.

  HP Print and Scan Doctor

  Let me know how it goes.

• My officejet pro 8600 will not stop printing if I turn it off. How can I get it to stop printing.

  I was printing a web page and it did print the first page ok but she continued printing at least 25 additional pages.

  I had to disable the printer, because there was nothing I could do to have it stop printing.

  Hey maNicRich,

  How this 8600 is connected to your PC? (USB, Ethernet or wireless)

  What is the operating system of the computer you are printing from?

  Have you tried to restart the PC (and router if connected network) in an attempt to clear the stuck job?

  Have you run printing HP and doctor Scan?  To access the HP PSDR click here.

  Let me know the answers to these questions, and I'll do my best to help others.

• Printer will not feed the paper card stock

  We have an Officejet Pro 8600 who will not feed the paper card stock. It was the printer that I used when I worked and did a great job on standard paper, but it won't take my wife stock card paper craft. We used to have a Deskjet F4400 HP all in one and we were able to print. Any suggestions would be greatly appreciated.

  John

  John,

  Welcome to the Community Forum of HP.

  Try indicating what type of media you print to the printer - if your media in the printing preferences settings do not understand "card", you should choose something else which is similar: Matt Brochure, card, 'something' that kind of card stock for the printer to the printer waits 'thick' paper looks.

  Printing preferences - Windows and Mac

  and... not really related, but may have some relevance:

  Print Labels_Business-Cards_Cards

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Envy 5532: HP Envy5532 not feed photo paper.

  The printer will not feed the paper through. Looks like it's printing, but finally, a message will appear that it is locked. When I opened the top, he did turn upward in the printer, but it is still in the back and can not affect on print.  I tried the Kodak photo paper and paper HP photo with the same problem.

  (1) I had the instant situation of resolved ink.

  (2) I watched a YouTube video on my particular printer, on all the parts and how to remove them and put them backwards. I realized that the problem was and he stares at me. Cover the path has not been TRIGGERED. When I pushed him down and SNAPPED into place, it resolved photo paper feeding problem and I was able to print photos without problem.  Fixing a paper jam - HP ENVY 5530 e-All-in-One Printer - YouTube https://www.youtube.com/watch?v=3dO4sPaKjSU

• HP Officejet Pro 8500 will not send or receive faxes

  HP Officejet Pro 8500 will not send or receive faxes. 'Run Test Fax' indicates that everything passes.

  Then see HP support pages for your model, its their equipment & the fax is independent of the victory

• Officejet Pro 8600: Officejet Pro 8600 will grab not photo paper

  I bought HP printers for decades. The quality took a nose dive. My 8600 will grab not photo paper. My only previous simply stopped printing using all colors... it looked like version a printer a ransom note. I won't buy HP again. It is too bad HP sold me 80 lb paper then their printers do not print it. I spent hours on it and am VERY frustrated. I have in my office purchase 3 8600 s and they all have the same problems (more). Shame on you HP.

  Hello

  HP Officejet Pro 8600 support up to 66 lb bond paper, the paper you use is too thick and not compatible with the printer.

  Below, you can find specifications of paper, check paper tray capabilities that list of all media supported for Tray 1:

  http://support.HP.com/us-en/document/c02858465

  Kind regards

  Shlomi

• Officeject Pro 8600 Plus: Officejet Pro 8600 will copy in color but not print in color

  I have an Officejet Pro 8600 Plus able to make copies of color, but it will not print in color of my office.  My printer uses the version of the firmware CLP1CN1416AR.  When I go to print a document in color, I go to the properties of the printer and then advanced and set print in grayscale on Off, but I get still only prints in grayscale.

  Thanks for your suggestions Zac.

  1. we have tried using several different programs (paint, Microsoft Word, Adobe Acrobat, a test of the printer properties page, etc.), but all printed only in grayscale.

  2. it's connected via Ethernet cable to our Wi - Fi wireless router and then to our laptop.

  3. the ink levels are all above 40%.

  I had already tried electric bike on the printer several times as well as the computer, which did not help.  I tried to change the printer settings default to print in gray and then changed them back to the color, but that did not help either.  I tried resetting the printer, mentioned in another thread (unplug the power cord at the back of the printer, while he was conducting, then unplug the power transformer in the decision-making, hold button power printer for 60 seconds, then reconnect the), but which did not help either.  Finally, I uninstalled the Windows printer and reinstalled a couple of times, and finally, it started working properly again, so, apparently, there was a problem with the driver who eventually got cleared up by reinstalling the printer/software/drivers.

  Josh

• HP Officejet Pro 8600 more. Out of paper message jam.

  I'm having a problem with the cancellation of all current print on an Officejet Pro 8600 jobs more, the last one will not cancel and the printer will not connect with the computer. There is paper in the tray and I can photo copy and other print jobs to the printer, however I cannot send a print job from the computer. Can someone tell me how to replace the out of paper message that the computer sends to the printer. ?

  Hello

  Download and run the HP print and Scan Doctor www.hp.com/go/tools who should solve the problem.