OfficeJet Pro 8600, Windows XP, very slow to print scanned pdf

All other prints exception scanned to PDF print normal PCDFS, even imported e-mail, etc., all other types of files.

Problem occurred after problems with XP, computer tech could rectify not so copied all files and reinstalled XP, no problem with XP, but the printing problem now with my own scanned pdf.  Thanks for any help.  JLS1946

Thank you to all who responded.  I have to admit it's a tough trying to decide it's the printer, it's Adobe, is the USB connection / wireless?  Now, that's what I managed to rule out now (thanks for all the help that JLS1946 did) it's not the connection.  I went until take that to someone who is very familiar with the Adobe and they suggested uninstall/re-installing Adobe. He said you should not lose your saved work and which corrected this before.  However, not all of you use the same software or the print version. PDF files, it seems.

Knowing what I know about the way in which the information is transferred to the printer, it is meaningless for me how only a few .pdfs are slower than others.  Check the contents in the file you are trying to print and compress, when you can.   I know that the web content may take longer to process during a print job and now I have to wonder if that has no place in the commonality among all of those here.

I think the last document I ran through should have some good suggestions. Let me know if it works. One of the reasons I don't think specifically that it is the Officejet 8600 is especially because it happens to other printers like this.  The only thing you have in common is Adobe. While searching for other PDF readers, I have noticed Adobe had so many stars (3.5 stars) like Foxit Reader (4 stars) did.  I'm not the right person to defend as to who can be a better software to use however.  I know I like CNET for their reviews and videos.

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8600 +: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    Install HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g January 2013.  No idea what happened but, lately, get an error message and asks to run Device Manager.  Even uninstalled the printer and re-installed but same error.  In the device, yellow icon with exclamation point Manager.  If I click on it, you will see the message:

    The drivers for this device are not installed. (Code 28)

    There is no driver selected for the item or a set of device information.

    To find a driver for this device, click Update driver.

    If I click on put updated driver and click Browse online: Windows not found driver software for your device.

    If I select Browse CD - error of installation is not recommended because Windows cannot verify that it is compatible with your device.  CD provided with your stupid printer!

    3 year old stupid printer and cannot find a way to solve the problem!

    Hi hope,

    Thank you for answering my questions! Please, try the steps in the following order:

    Then restart the HP print and Scan Doctor and let me know what happens!

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    I hope that these steps don't solve your problem and have a nice day!

  • HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

    Morning

    Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

    Thank you

    Stuart

    @StuartTunstall

    Welcome to the HP Community Forum - we are a community of fans of HP !

    It seems that your printer is not eligible.

    Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

    I also checked the datasheet for your printer and did not find any indication of instant support of ink.

    Time for a new printer HP brilliant?

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    Hello, I have just replaced my XL Black cartridge and was invited to share information with HP on my

    HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    part of this info provide clarification to the HP of the actual amount of draws so I'm really curious to know what is the number of pages, I printed the

    does anyone know a way I can find this info please?

    Thank you

    Touch the front panel and use the arrow to the left if necessary to get to the home screen.  Then tap the droplets of four ink at the top right of the screen and press "Print report".    Articles 12-14 will be the total number of pages, pages in color and print pages without borders.

  • HP Officejet Pro 8600 more e-all-in-one printer - N911g face 2 of copy or scan on adf?

    I just want to know if HP Officejet Pro 8600 Plus e-all-in-one printer - N911g can do 2 copy or scan on adf faces?

    Thank you.

    Hello

    Based on this, it can:

    Improve productivity in the office with this all-in-one performer who offers vibrant prints and marketing without borders
    materials. You can count on professional color documents for up to 50% lower cost per page per report
    with lasers.1, tap the touch screen to easy-to-navigate to access applications and print from the web without a PC2 - or
    print from virtually anywhere with HP ePrint.3 Boost efficiency in your office with Ethernet and wireless
    connectivity, 4 automatic two-sided printing, an automatic document feeder 50 sheets (ADF) and digitization of glass to the top
    legal - size.5

    Kind regards.

  • OfficeJet Pro 8600, Windows 7, any type of document with an image prints very slowly

    OfficeJet Pro 8600 Premium.  Windows 7 32 bit, any type of document with an image prints very slowly including .doc. Docx, pdf. Even when printing in draft mode.  Other documents are very well

    Take a look at this link.

  • HP Officejet Pro 8600 e-All-in: extended image printing time

    I work in a center of art and we always print pictures from the internet and stored images to use with our classes.  We have 2 8600 photograph printers and both extremely slow.  It may take up to 3-4 minutes to print a picture.  We also have a Dell PC that has no problem printing in a reasonable amount of time for the size of the image.

    I tried affecting the project settings & directly connecting to the printer and have had no success in reducing printing time.  Someone had this problem?  My next step is going to be uninstall and start again if none of you have an alternative for me.

    Thank you

    MCM1

    Hey @MCM1,

    Welcome to the Forums of HP Support!

    I understand that your two printers of HP e-all-in-one Officejet Pro 8600 printing slow computer Mac OS X 10.8. However, they print at a normal speed of your Windows System. I would like to help you today with this slow printing problem. Because printers print well to a Windows system, I don't believe that this problem is the printer hardware or connectivity related. I think rather than the print driver or incorrect is used on the Mac OS System X 10.8. Or, there may be a conflict occurring on the Mac printing system. Therefore, I will ask you to perform some standard Mac troubleshooting for this problem. Can I please you follow the steps below.

    Step 1: Check of driver:

    To start I have to confirm that your Officejets HP using HP driver and not the generic Apple Airprint driver print.

    1. click on the menu of Apple , then Preferences System.

    2. click on Print & Scan and then check if the name of your printer appears in the printer list.

    3. click on the name of your printer, click the sign minus (), then remove the printer.

    4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

    5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected and not the Airprint.

    6. click Add to add the printer to the list.

    Once the printers have been confirmed as using the correct printer driver, please test printing an image. If the slow printing problem continues to occur, proceed to the next step.

    Step 2: Reset the printing system:

    Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under "Reset printing in OS X Lion system" that the steps are the same for Mac OS X 10.8. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do not return in your HP Officejets currently Add.

    Once the reset is complete, proceed to the next step.

    Step 3: Uninstall the drivers and software:

    Please click here to find out how to properly uninstall your printer. Once the site opens, follow the steps in step 1 and step 2, depending on how you originally installed printers.

    Once the uninstall is complete, please continue on.

    Step 4: Check and repair your Mac disk permissions:

    1. Open Macintosh HD and go to Applications
    2. Go to the Utilities folder
    3. Open disk utility
    4. Select the hard disk volume, you use (usually on the left)
    5. Select verify disk permissions
    6. Once this process is complete, select repair disk permissions

    Step 5: Check the Apple updates:

    1. Go to the Apple
    2. Select System Preferences
    3. Select software update
    4. Click update now
    5. Install your available updates
    6. Computer restart

    Step 6: Install devices:

    Please click here to download the latest package full feature software and driver for your printers. Once the download is complete, follow the prompts on the screen to install the HP Officejets. Once the installation is completed successfully, please test print to confirm that the slow printing problem has been resolved.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

    I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

    I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

    I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

    HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

    I consider that a resolution of the post!

  • I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hi all

    I changed my network SSID & PW but I forgot the password for the printer web page.

    Password was written in a notebook and notebook is moved at the moment by the cleaning person.

    Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

    * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

    I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

    and ideas?

    Thank you, xxVEGASxx

    * xxVEGASxx *.

    You can do a reset of the printer using the LED screen on the printer.

    Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

    Which erases all settings, including the password for the printer.

    To reset you describe is probably the one mentioned in this article:

    http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

    but it's probably a deeper reset that you really need anyway.

    -Seth

  • OfficeJet Pro 8600 Plus: can not get the printer to function after installing new wireless router

    I recently changed routers from D-Link to a Netgear R6400.  I could get my desk, the laptop and the i - Pad to connect to the new network, but not my HP Officejet Pro 8600 more.  When I try to change the IP address, which is what I think I do, the screen indicates "this feature has been locked by your system administrator or the one who put up the system."  I'm the only one using this printer and I put in place originally, but I do not remember 'locking' anything.  Will you please tell me how to solve this problem, so I can use the printer again.

    Hello

    Thank you for using the HP forum.

    A suggestion that we recommend is to uninstall and reinstall the software FULL of features.

    Alternatively, you can try the doctor print and Scan?

    Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

    http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

    Hope that helps.

  • HP officejet pro 8600 more: double side id or copy scan

    Hey,.

    I have hp officejet pro 8600 and I'm unable to scan or copy id cards on both sides.

    y at - it an option for scanning on part and other identification cards or copy bothh sides of ID card?

    can you please help me with it, because I really scan identity cards, the two side to my computer.

    "" and if there is no video or tutorial on scannig or copy on both sides of the identity card for "hp officejet pro 8600 more ' and then share it with me.

    Thanl you.

    Hi @Sanky1,

    While the document feeder allows the 2 sided copy and scan, the loader will feed not IDENTITY cards. What you can do, is copy each side individually, then put two copies on the document feeder and scan 2 faces. If you want both sides of the card on a single page, same idea, copy both sides individually, then place them copies on the glass to scan so that they are aligned with a scanned page.

    I hope this helps. If you need further explanation or assistance, let me know.

  • HP officejet Pro 8600 +: Missing page in the «HP Print for Chrome» software orientation option

    I can print OK in the format default portrait of a model of Toshiba Chromebook CB30-B-104 for a HP Officejet Pro 8600 + using "HP Print for Chrome" (installed from the app store for Google Chrome), but I can't find an option anywhere to change the page orientation. So if I print a document/image oriented in landscape format, it occupies only half a page of A4 portrait oriented superior. I tried to turn the image/document in the print dialog, but the rotation is ignored when printing is performed.

    Is this a "bug" or am I missing something?

    Updated February 10, 2016

    My original statement was misleading. I should have checked my facts more in detail.

    I cannot find an option called "Layout" to select "Wonderful landscape" or "Portrait" page orientation when you try to print the PDF files. When you try to print from other sources, the 'Layout' option seems OK.

    Hello @JBL11.

    Welcome to the Forums of HP's Support. I understand that you have a problem with the page orientation when printing with HP for Chrome print Chromebook. I would like to help,

    When I tried printing of Chrome app I had an orientation option. I pull a document and press Ctrl + P.

    Then I double checked that Print of Chrome was my printer destination. (I also use Google Cloud Print to the same printer).

    My options going to the bottom of the list are Destination, Pages, and page layout. Put in page gives me the ability to change from portrait to landscape.

    Have you tried to uninstall and reinstall the application?

    1. Click on the list of apps icon in the launcher at the bottom of the screen.
    2. Find your application in the list and right-click (click with two fingers on a Chromebook) its icon.
    3. Select Delete chrome.

    Gives it a try and let me know how it works.

    If this solves your problem please click on accepted Solution so that other people with the same problem can find the easiest answer. If you want to say thank you, it's always nice when someone clicks Kudos. If you have any other questions let me know.

  • OfficeJet Pro 8600 not giving orientation options when printing photos from the main tray

    Greetings, all.

    I searched this issue, but I have not found anything, so this is:

    I have an OfficeJet Pro 8600 911 and an iMac (21.5 inch, end 2013) running OS X 10.9.2 Mavericks.

    The problem comes when I try to print a photo 4 x 6 from the main drawer - in the print dialog box, the image is oriented the wrong way on the preview. No matter if I rotate the image or not, it does a perpendicular orientation. In the print dialog box, there is no orientation option to change from portrait to landscape or vice versa, even if

    I checked the software update of the Mac and the Pro 8600, but there is nothing available.

    I am pleased to learn that the Preview will allow you adjust orientation, at least, we know that this is possible. Apple is the one controlling the features such as that within the application. Click here: view contact information of apples. Apple Support Forums are also available here:

    Kind regards

  • HP Officejet Pro 8600 fact® e-all-in-one printer accepts paper tabloid

    I plan to replace my HP Officejet Pro K8600 because it is so more printing more than one page at a time. I like this printer is that it can print tabloid paper. Is this also the HP OfficeJet Pro 8600 e-all-in-one printer?

    Hi bcarls,

    I understand that you want to know if the HP OfficeJet Pro 8600 e-all-in-one print tabloid size.

    I'll be happy to help you.

    Only printers large format will have this features to print on tabloid paper.

    I have provided the Officejet HP 7610 Wide Format e-all-in-one printer that would be compatible.

    I hope this helps.

    Thanks for posting on the HP Forums.

    Have a great day!

  • OfficeJet Pro 8600 - How do I 'create and print a copy to one side of a duplex ID '?

    How do I "Create and print a copy to one side of a duplex ID" which is advertised as a feature in the commercial documentation for HP OfficeJet Pro 8600?

    I read the community forums help and documentation of the printer without result.   Any help would be appreciated.

    simple.
    1. press on copy
    2. click on settings
    3. click on 'Copy ID' and select 'on '.
    4 OK

Maybe you are looking for