OfficeJet Pro 8610: How can I enable a document to a page in a poster?

Similar Questions

• OfficeJet Pro 8610: How can I keep my Officejet Pro 8610 fall offline?

  My Officejet Pro 8610 will soon after a print offline job and must be recycled to the wide and turn it back on before it will print again. (says not connected printer) Now, this happens after 16 months of operation. Mac computers and routers are Apple Time Capsule. Everything is wireless. A semi full reset on the 8610. Uninstalled and reinstalled HP software. Restarted routers.  Any suggestions?

  Hi @GLORIATAYLOR,

  Welcome to the HP Forums!

  I understand that your printer always disconnect your wireless network. I want to help.

  You might want to set a static IP address for the printer. This is therefore a document, you can review how to set an IP address: http://support.hp.com/gb-en/product/hp-officejet-pro-8610-e-all-in-one-printer-series/5367603/document/c04082680/

  Let me know if it helps.

  Please click on the thumbs up below to thank me for my efforts! If this post helps you solve the problem that you are experiencing, please click "accept as Solution" so that others who may have the same difficulty can find the answer more effectively. Thank you for participating in Forums of HP!

  Kind regards

• HP OfficeJet Pro 8610: How can I find the address to return a defective printer?

  More than a year ago, we had a HP OfficeJet Pro 8610 replaced due to a defective unit Telec.

  For some reason, we were never able to send the a faulty back to HP, probably because we never received details on places where to send it to...

  We have a case number, but nobody has never detailed how and where send us the defective device to?

  Can someone point me in the right direction?

  Thank you

  HP will usually send a return label prepaid with the replacement unit, so all you have to do is put the old unit in a box and send it back to HP.

  HP usually ask also a number of credit card for security and will charge you for the new unit if you do not send the replacement within 30 days.

  There are also cases where HP will review the old trash of machine and just ask recycle you, but it should have been paperwork indicating that with the replacement.

  I had a few cases where HP has delivered something for me where they want to go back to the old or machine and in almost all cases about three days later, they called to see if I had been there.

  Keep in mind, that I do not work for HP, but I worked with HP hardware for some time now and I think that if you had it for more than a year that she does not need to be returned and can be eliminated.

  If you wish to contact HP, then you look at the support page for your machine and then look for a contact link so you could send them a message and the reference number and ask if you can dispose of the machine.

  If HP wants to come back, they should send you a prepaid return label, they can do it by e-mail.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• HP Officejet Pro 8610: How can I get a report with the total number of pages printed on my HP Officejet Pro 8610?

  The number of pages that print is so critical to a choice to use the "HP Instant ink Plan' or not, how can I find the total number of pages that I printed on my brand new (installed 2 days ago) 8610?  And if I can, there are a total of 'resettable' or working capital?  Don't see anything in the user guide and a search gives nothing usable on this blog.

  Wireless printer installed on an old PC with Windows XP SP3.  I also of course install with cable network but so far it works well on my home network without a network cable.  Is there any operating system, I also have a laptop Lenovo Vista on which I can install this printer.

  Please do not answer I can find total by counting the number of pieces of paper that I have.  Surely the inner workings of this beautiful machine must have the requested data as well as HP can say my consumption if I select the monthly plan of ink!

  This 8610 was a good buy (net $89,00 after the resumption of my six years, Deskjet J36xx) at Office Depot/Max who has of course influenced my decision to purchase.  So far, I am very happy with the print quality and speed, have not yet tried the scanner and will probably never use the fax machine since I have no land line phone.

  Thank you

  Harry

  Hello

  Article #2 of the report printer Ststus will tell you. Please try:

  Printer status report

  The printer status report to view current information about the printer and the status of the ink cartridges. Also use the report to State printer for you help to solve the problems associated with the printer.

  The printer status report contains also a log of recent events.

  If you need to call HP, it is often useful to print the printer status report before calling.

  To print the printer status report

  1. in the Control Panel printer display, press and drag your finger on the screen and then press Setup.

  2. press on printing reports and then tap Printer Status Report.

  Kind regards.

• HP Officejet Pro 8610: How can I change my HP Officejet Pro 8610 Chinese back to English

  I was just inherited this printer and I am trying to use it with my Windows 10.  I can't understand the display printer settings, because they are all in Chinese.

  Hi @DDMAC44.

  Welcome to the Forums of HP's Support. I see that you have difficulties with change of language on your 8610, I think I can help you with that!

  Although the language is different, the location of the buttons/options is the same.

  Scroll from right to left. You will see the Setup menu. You'll recognize it by the image of two engines.

  

  Tap this icon to access the configuration menu.

  The first option will be to the printer configuration menu. This touch.

  The following menu has country, as the top and right option under which is the language.

  Tap the second option.

  Scroll through the languages. Fortunately, they are written in the appropriate language.

  When you see the English, touch, and then select Yes.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• How can I scan a document with mutiple pages into a single file?

  Hello

  I have a HP 3070 and Windows Vista. The printer and scanner are properly configured. But there's something that intrigues me:

  How can I scan a document with mutiple pages into a single file?

  I start the HP scanning software and choose pdf or tif format. The analysis of the option of single file for each page is unchecked. Once I scanned the first page it has no option to scan additional pages? I got back, save and

  Thanks in advance

  Hello

  The HP software disables scanning multipage when the resolution is greater than 300 dpi. The resolution of the issue is to reduce equal to or less than 300 dpi scanning resolution.

  Thanks and greetings

• OfficeJet pro 8610: I can scan letter legal-size on officejet pro 8610

  Is it possible to scan format letter to a legal size on the officejet pro 8610?

  Hello

  The card says:

  Size maximum ● scan from the scanner glass:

  ◦U.S. letter (A): 215,9 x 279.4 mm (8.5 "x 11")

  ◦U.S. legal (HP Officejet Pro 8620 and HP Officejet Pro 8630 only): 215,9 x 355,6 mm (8,5

  inches x 14 inches)

  ◦ISO A4: 210 x 297mm (8.27 x 11.7 in)

  Size maximum ● of the scan from the ADF:

  ◦ADF: 216 x 356 mm (8.5 x 14 inches)

  The original format letter, it will scan format letter through ADF so my suggestion:

  b analyze then, letter size

  (b) printing on legal size. After that

  (c) analyse the legal size.

  Kind regards.

• OfficeJet Pro 8620: How can I activate the message "connect the printer to HP Instant ink status update?

  Initially, I signed up for the connected HP program but had to stop when I lost my internet connection. Wi - Fi still works. I replaced my ink cartridges instant with no instant ink with new HP ink cartridges suitable. The printer works, but before each print job I have to walk over to the printer of the touch screen and press the 'OK' button to remove a warning message that States: "connect to a printer to update HP Ink Instant status.» How can I disable this message so that I can print without having to respond each time? In addition to replacing the original instant ink cartridges, I did it 'hard' printer restarts (with the switch market), tried to restore the factory settings via the touch screen system settings, turn off internet connectivity and disable all alert settings in the HP utility. Help!

  Hello @wepj,

  Welcome to the Forums of HP and thanks much for posting!

  I want to help you with the message that you get on your HP printer officejet Pro 8620 e-all-in-one to connect to the server of ink instant.

  What it sounds like, is that there have been pages printed since the last printer connected to the HP Ink Server instant. If you cancel your account AFTER the last connection of the printer to the internet, the printer have no idea that the account has been canceled.

  I recommend you contact our Cloud Services support at 1-855-785-2777 for assistance.

  I hope this helps!

  

• OfficeJet Pro 8620: How can I claim the extended warranty and offer Cashback?

  Hello

  I just bought an Officejet Pro 8620 and claim the extended warranty and cashback that were offered.

  I am using this Web site: http://store.hp.com/UKStore/Merch/Offer.aspx?p=c-faq-promotions#hp-promotions!

  HP promotions site doesn't seem to work correctly by saying "we're sorry - this link does not work."  and don't give me the shape I need to make these requests.

  A person of Promotions HP can fix this please?

  Thank you

  E-mail received from HP saying that rejected my application and I need to re-apply using the URL provided in the e-mail. What I've done.

• HP Officejet Pro 6830: How can I set up my printer to print only in black and white?

  Hello
  I was wondering if someone can help me. I want to be able to print in black just on my printer.

  My printer is a HP Officejet Pro 6830, and my operating system is Mac OS X 10.10 Yosemite.

  I don't have an option on my Word program which allows me to 'gray levels' or any type of color option.

  Any help would be great, thank you in advance!

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized: click Show details to display all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset.

  A used preset will be default, so simply select the standard preset to print in color.

  Shlomi

• OfficeJet Pro x476dw: How can I add fonts to OfficeJet x476dw printer?

  I just installed a new Officejet Pro x476dw all-in-one.  It's a great printer.  The question I have is we use fonts Oswald as the standard of our company and when I try to print this it does not display properly.  I ran reports and as you can see that Oswald is not on the lists of fonts so I think that we must add to the printer.

  My goal is to get fonts Oswald print correctly.  Please let me know what I have to do to get there.

  Robert

  The printer driver may include an Advanced Preferences option to "Send TrueType as Bitmap".

  If selected, this will cause several (rather than one or two scalable) bitmap soft fonts to download, one for each size of font required.

  If there is a firmware issue interpreting fonts downloads soft, maybe it's that this only affects the scalable fonts, not only bitmap fonts, so it is perhaps interesting to try?

• HP Officejet Pro X451dn: How can I load 3 x 5 cards in Tray 1 on HP Officejet Pro X451dn

  The manual says "Use Tray1" and then shows how to load the paper.

  Is there a trick to loading of 3 x 5 cards?  What size put them?

  How can I keep them from sliding into the bowels of the printer?

  What are the tips?

  It seems that the way to do is to place the cardsin a battery with the side 3 "to the inside of the printer, then dismiss them as deeply into the printer as they can go up just at the edge of the slide (the lines from the rear edge).

  Outside 1/8 "(approx) of the card will not be printed."

• HP Officejet Pro 6830: How can I turn off Auto Save function before printing

  I recently bought a new printer HP 6530 and configured using the wizard.  Now whenever I try to print anything it forces me to save as a PDF doc before printing.  I checked my settings and there is no 'save the doc' feature in advanced features.  How can I disable this feature?  Now I can't pring a webpage or anything that is not a Word or PDF doc.

  Hello

  Google Chrome click file > print.

  In the print dialog box, click the change button and select the printer instead of the default save as PDF option, which should allow printing from the browser.

  Shlomi

• HP 8600 Pro - default is Fax - HP Officejet Pro 8600, how can I change the ordinary printer

  Running Win 8.  Under control panel, the print device only shown is Fax - HP Officejet Pro 8600.  In specific applications, I choose the HP Officejet Pro 8600 in the drop down menu, but this option in not avialable in the control panel to make the printer regularly by default.

  I hope I am explaining that properly.

  When you right-click on the Fax - HP Officejet Pro 8600 icon and browse to set a default done it gives the choice, if not
  Click on the printer icon and look for the properties of the server printer on the top of the page to go to tab drivers and check if it shows you only officejet Pro listed twice a 8600 8600 series and the other as a Fax.

  If you see the two that could be the problem of installation does not complete successfully. I would uninstall from Add/Remove programs to remove the entry from the server properties and install the lates SW of the website the link is below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4132&product=4323659&sw_lang=

• HP Officejet Pro 8600 N911a: can not save scanned documents

  button to scan save the docs is grayed out after the scan is finished and ready to save the step

  Hi @orthoman,

  Thank you for joining the HP Forums!

  I understand that you cannot save documents scanned with your HP Officejet Pro 8600 N911a printer. I'm happy to help you!

  Please take a look at this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Hope this guide helps!