OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

HP OfficeJet Pro all-in-One 8610 print intermittently

11/09/2016

This is a request for additional assistance from HP, Apple and AT & T Community Forums

Machines and affected software:

Printer HP OfficeJet Pro 8610 e - All - In - One.

Serial number: CN4CNE3463

Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

iMac 21.5 inch late 2009 (daily use)

Serial number: W89415S5PC

OS X El Capitan: Version 10.11.6

MacBook Pro 13.5 inch late 2009 (occasional use)

Serial number: W8942UW766D

OS X El Capitan: Version 10.11.6

MacBook Air 13.5 inches mid 2012 (daily use)

Serial number: C02HX3ZADRVC

OS X El Capitan: Version 10.11.6

Wireless router: AT & T U-verse ARRIS NVG589

more AT & T Wireless Access Point VEN501 device

Wireless Router Range Extender: Linksys RE6500

Multipoint unresolved printing problem:

HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

(1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

(2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

(3) tried to scan the printer for iMac's wireless: would not scan.

(4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

(5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

(a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

(b) the iMac to the router and wireless router for printer: test page will not print.

08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

AT & T: recommended

(1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

(2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

AT & T told me that the printer should work fine now.

Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

Wireless to the router for printer

Wireless to the router and Ethernet cable for printer

Ethernet cable to the router and wireless to a printer

Ethernet cable for printer

Another experiment on 11/09/16 led to erratic printing depends on the original machine:

1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

Link to the firmware.

Tags: HP Printers

Similar Questions

  • Why my hp officejet 4215 all-in-one takes forever to print each page? (Note: printer is shared)

    Printer is shared by a MacBook Pro and a laptop Lenovo to use Windows 7.

    Hi micamj,

    It seems that the printer is having a problem. No, I didn't see this question on this printer before. Have you thought to replace this printer with a newer version. Here is some information to help you with a new printer.

    HP trade-in program

    Shopping.HP.com

    Please contact our technical support at the 800-474-6836. Support agent can also help you to enter a new printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

  • HP Officejet 6200 all-in-One series will not be printed. I get the message that the spooler is not connected.

    I have a HP Officejet series 6200 all-in-One that will not print. I received the message that the spooler is not connected how to fix this problem? Thank you. Margaretjc

    Moved from feedback

    Original title: impression of the printer

    Contact HP support.

    CrystalBall © also SEZ...

    If it's a computer with Win7 with IE10 installed, have supported HP make you that your printing software currently installed is compatible with IE10 (yet). [The chances are that it isn't.]

  • Officejet 6310 all-in-One fainted during the printing and copying

    I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

    I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

    Thank you.

    Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

    It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

  • HP Officejet 4622 - All-in - One -: how to enlarge print on a HP Officejet4622-all-in-one printer

    How can I enlarge printed text on 4622_All all-in-one HP Officejet?

    @lostonprinter

    Printer font size is usually the product of the application that you use to present the work to the printer.

    See below for an explanation to adjust the sizes of fonts on the screen and in the preview before printing:

    Manage the print with preview output before printing

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • OfficeJet 4500 all-in-one wireless WIIL NOT STAY online! Help, please!

    Help, please! I am incredibly frustrated with my officejet 4500 all-in-in-one wireless. my printer won't stay not 'online' and when I check my wireless network, the printer is listed as offline as well. When I try to print, I get the message "offline". I downloaded it on every possible driver update, scan and fix the hp program and even uninstalled and reinstalled this printer at least 8 times. I'm at my wit's end.

    I turned off the printer, and when it turns on, a document or two will show, then if I try to print something again immediately, I am again in offline mode.

    I also tried the 'hard reset' options I don't read here, but again, no luck. I changed both printer cartridges.

    I have coursed through the troubleshooter at least 8 times, and who never really helped. Cannot get a consistent performance. of course, at the time wherever I decided to ask for help, I'm out of warranty.

    I really hope someone can help me. I confess that I have very limited computer, so all suggestions, please use very simple instructions...

    Am I the only one having this problem?

    I'm sorry that you are experiencing this issue. It seems that your router is hitting the printer on the network. You can try setting a STATIC IP ADDRESS for her. This will have the computer and the printer communication directly.

    Here is a link that will help you implement. Let me know if you have any questions on it, or if that helps.

    http://support.HP.com/us-en/document/c02790693

    You can also reset you router. Unplug it for 30 seconds and plug it in again.

  • OfficeJet 7310 all-in-one auto 2-sided printing problem

    Printer all-in-one Officejet 7310 with auto 2-sided does not even appear as a printing options in Windows 7. Is there a driver that will solve this problem?

    Babe7 salvation,

    Can you make a standalone copy from the glass?

    Can you make a standalone copy of the ADF?

    Follow the steps outlined in the document below.

    The ADF (ADF) captures no paper

  • HP Officejet 6500 All - in - One 709 a printhead printer resolution

    I want to thank Bob Headrick for his suggestion to soak the print head in warm water for 10 minutes.  It was a fantastic idea.  It does not solve the problem with my printer.

    I'm glad that I could help him.  For others looking for the solution for black not printing on the Officejet 6500 a, see the document here.  (Be sure to check the events on solution 6.)  If this does not resolve the problem then soak the printhead as shown in this post can help.

  • HP Officejet 7410 all-in-One (wireless) will not be in service - seems frozen

    This afternoon the power came out in my office at home and after it was restored that my 7410 all-in-One printer stops working (bought in 2005).  I have unplugged and replugged and all I get is a blue screen on the digital screen with a circle with a line at 12:00 and the number 00000020 on the bottom.  The slight camera close the slots for memory cards also flashes on and outside.  No other light.  (Earlier the digital monitor comes to show the HP logo and a kind of hourglass linear downstairs).

    The Start button does not, not even if I press on during a long period.  Is there a way I can manually reset the printer?  Help, please.  I need to get out a presentation tomorrow!  Thank you very much.

    Yes, press on and cancel at the same time.  Got the FixYa.com site response.  Good luck.

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

    The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

    Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

    From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

    I am running a computer portable 64-bit windows 7, home premium and USB connection.

    Hey @TKStall,

    Thanks for getting back to me with the error messages.

    The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

    Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

    Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    It has been a pleasure to work with you. I wish you good luck going forward with this!

  • C4280 printer all-in-one: C4280 does not print

    Hi all

    I got this C4280 at a yard sale.  They said it worked, but he has not been connected over the years.  Without installing it, I tried to copy and it goes through the motions, sounds good, but nothing appears on the page.  I tried wiping and cook with the vapor cartridges.  It feels like the black, it is empty but there is no ink to color one.  Some came out when I steamed it.

    I installed the software and tried to clean without success.  I actually had a very light something out of the black cartridge but nothing about the color of one at all.  Ink levels show black as '? (probably empty) and color as most half full.  I would like to get something at least, no color?

    I have a few cartridges no HP on order, appear in the coming days. Can someone suggest that I try to copy, or give me some indication that this might actually work when installing the cartridges?

    Thank you!

    Hi @26kick.

    Welcome to the Forums of HP's Support. I understand that you have a problem getting to your printer. I would like to help.

    Lack of use could have damaged printheads. This could be the cause of the problem. Fortunately, the print head is integrated in the ink cartridges. Replacement of ink should solve the problem.

    You can also try to go through this document. Series of HP Photosmart C4200 all-in-one - output printed lines or scratches

    I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

  • HP Officejet 4620 all in the new cartridge not print black-brand

    Hello everyone, I hope someone can help me, because it took hours of time and gave rise to a lot of frusteration. I just replaced my black ink cartridge, and not a single drop of black ink will print. I have authentic and cleaned cartridges printheads, two steps one and two, at least two times each. In the meantime, I've used for all my color ink, that always works. But the black does not appear at ALL. Of course, I could buy color cartridges more and use them to print in black, but at this point, I don't want to put more money in this printer if it does not work properly. I'm desperate for a solution! I run a small business from home and I NEED my printer. My warranty expired a few months ago and really hope I don't have to pay for phone support.

    Someone has any advice on how to get black to print correctly? PLEASE AND THANK YOU!

    I suggest that you call the HP regardless of warranty as described in the post heresupport.  If you live in the United States dial 1-800-HPINVENt, also see the details here.

  • HP Officejet 7310 All In One Oxi does not illuminate

    I turned the computer and the printer off a few nights there, and now the printer will not return.

    The troubleshooting steps described in this document can help solve the problem.

  • OfficeJet J4680 all-in-one: J4680 does not work after installing windows 10

    I have recently installed Windows 10 on my Dell laptop.  Yesterday, I was able to print wireless at my J4680 JO.  Today, I tried to analyze, and he is identified as not online.  Can't print now.   I turned off laptop, router and printer and restarted.  I added the latest driver.  Still no luck (in print or scan - still says offline).  Help, please.

    Thank you

    Hi @mlanders55,

    Welcome to the Forums of HP Support! I see that you have problems of analysis, since the upgrade to Windows 10. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    If you have not completely uninstall and reinstall the printer software already, I'd say to start it there first. Here is the link to the latest drivers: OJ_AIO_J4600_Full_Win_WW_140_408 - 5.exe

    You can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

    What were the results when you ran the Print and Scan Doctor?

    I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

    Please let me know the result and if there is anything else I can help you. Thank you.

Maybe you are looking for