OfficeJet Pro 8610: OfficeJet Pro 8610 - driver problem Windows 10

Similar Questions

• where to get the hp laserjet 6l pro printer driver for windows 7 32 bit

  where to get the hp laserjet 6l pro printer driver for windows 7 32 bit.

  or if not is there a generic driver that will work for hp laserjet 6l pro printer in a 32-bit windows system 7.

  My Windows 7 Professional 64-bit system has a built-in driver (provided by Microsoft) for HP LaserJet 6 L printer; I guess that the 32-bit edition may also provide a driver.

  Note that the driver can only appeared after the list of drivers in the Add Printer dialog has been updated by clicking the Windows Update button in this dialogue and in the meantime (maybe several minutes) for drivers to download and list to be filled again.

• Help! Problem using HPSCAN.exe or the TWAIN for HP Laserjet Pro cm1415fnw driver using Windows 7

  I used the HP Laserjet Pro cm1415fnw for over a year without problem.  When I first bought the unit, I was using a Dell with Windows XP desktop computer and connected to the printer via the USB port.  I was able to print and scan from my computer, even in applications that use the driver scan TWAIN such as Word, Acrobat, etc.

  I've since upgraded to a HP slimline s5-1160 computer using Windows 7.  I installed the software my installation CD Laserjet is no problem.  The printer is connected to the computer by USB port.  I can continue to print without problem.  However, I am is no longer able to scan using the HP (HPscan.exe) software, or applications that use TWAIN scanning driver such as Word, Acrobat, etc.  When I try to do, it takes a lot of time before he asks me which scan TWAIN driver to select.  When I select the MFP from HP cm1410 series, the program hangs or returns to the State wherever it was before I tried to scan a picture in a document from the program.

  I can scan however successfully using the Wizard Windows Scan / Fax or if I choose "Devices and printers" in the Start Menu and select 'Start scan' in the menu after right-clicking on the HP printer icon.  However this option restricts my use of the scanner - I can't scan to PDF and I can scan several pages in an OCR application.  I have to analyze on a JPG or TIF or PNG.

  What to try to solve this problem, I did the following without success:

  1. Uninstall and reinstall the drivers and software complete (and using the most recent version on the HP site)
  2. Change ETIOU USB ports
  3. Run the HP scan diagnostic utility, which seems to show an error to the WIA, scanning stage and then recommend that I have uuninstall and reinstall the full software.  When I skip that and allow it to check for TWAIN scanning, it gives me a similar error, suggesting I use the latest version of the drivers (the driver that I use is v 3.0 dated 12/11/2009) so in this case the utility of diagnostic scanning HP provides NOT a fix for this problem other that uninstalling and reinstalling , which I did several times without success
  4. Contact HP support for the computer and the all-in-one (which as I understand it there's different support staff).  Staff of the printer claims it's a software problem and that the staff of the computer must be able to resolve the issue (something not having "launchpad" installed correctly.  When I communicate with the staff of the computer, they say it is a printer driver problem.  So I'm at a standstill
  5. I studied the HP support forums to see from this link - http://support.hp.com/us-en/document/c02661093 - if you can't scan from software HP you can use programs that rely on WIA (Windows Fax and Scan) drivers that I already know I can do it, but implies that HP doesn't have a solution to find out how to scan using their own software!

  My gut tells me that he is one of those problems that many others perhaps, but for which there is no viable solution.  It is possible that during the uninstall and reinstall the software, remains can stay behind that prevent the proper functioning of the drivers, but without knowing how to "clean up" specifically those remains before you reinstall the software, I am at a loss.  Oh and by the way, I also tried using CCleaner and Norton Registry Cleaner to try to clean up these remains, but that effort did not help.

  My question is basically this... or does anyone know of a fix for this problem should I resign myself to use the Wizard Windows Fax and Scan to scan documents and pictures, and forget about using TWAIN programs like HP seems to suggest?  I think that because I use a HP printer/scanner and a HP with Windows 7 computer, this problem should NOT be a problem!

  Hi Radiopeople,

  Follow the steps below to check the WIA Service:

  1. type services.msc in run or search and files program

  2. scroll the page up to the WIA Windows Image Acquisition

  3. make sure that the service is running. Click on stop and then restart to ensure

  4 restart the computer

   

  Restart the services of dependencies:

  1. Click Start, in the search box type 'service ' without quotes.

  2. scroll down until you see Windows Image Acquisition (WIA).

  3. double click on it and go to the Dependencies tab.

  4-2 services must be listed.

  5. close this window and look for the remote procedure call (RPC).

  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.

  7. go to hardware detection kernel and Double click.

  8. set the Startup Type to manual and click on apply.

  9. you should be able to start the service by pressing Start.

  10 now, you are done and the Twain Manager must work and gives you is not a mistake.

  Check the dependencies or sous-dependances:

  Right-click WIA (Windows Image Acquisition) by selecting the first Properties , and then click the dependencies tab. It should list: remote procedure call and Detection of Harward Shell

  Under the CPP, it will then list DCOM Service Process Launcher point final RPC Mapper date back to the start all the items listed as dependencies or dependencies under WIA void list main services.msc and right click then

• Driver problem Windows 10 LAN ASPIRE 5750 G

  Hello

  I'm having some trouble finding a compatible driver LAN for my aspire 5750G on windows 10.

  While it is connected with a LAN cable, the first time I start up my laptop, or after restarting the adapter, internet works. It gives me an IP address and everything. But as soon as I start navigating, I lose the connection to the bridge.

  I tried all possible methods to solve this. Tested with another router, disabled ipv6, disabled the dhcp on the router and set up a static IP and gateway + everything else I could find on Google. Nothing works. I tried to install the driver of windows network 7 from the acer support site, but unfortunately, it throws the following error: "this device cannot start. (Code 10) "even with the compatibility settings.

  Any of you encountered this problem? If so, could you please share this resolution with me?

  Thanks in advance!

  Alex

  https://www.Broadcom.com/support/Ethernet-NIC-NetXtreme-i-desktop-mobile

  second link, click on the arrow to the left, accept and download then install it.

  I noticed that you have 2 yellow exclamation point in Device Manager...

  Double click on it
  Choose the tab "Details".
  in the drop-down list, select HardwareIDs
  Click the first value and paste here

• XP remote hard drive problem - Windows 7.

  I have a 500 GB external hard drive (Seagate expansion Portable Drive) my father format & loaded but when I tried to access it told me that I had to format. Then I formatted it & he wiped the data but now they can access it. He's got windows7 I have xp, what is our problem?

  Hi ArnoldRendell,

  ·         You get the error message?

  ·         Are you able to access the external hard drive in Windows XP?

  Follow these methods.

  Method 1: Performs a search on the external hard drive using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to defragment your disk Volumes in Windows XP

  http://support.Microsoft.com/kb/314848

  How to analyze and defragment a Windows XP disk

  http://support.Microsoft.com/kb/305781

• Driver problems Windows 7 HP 15-f039wm

  After decommissioning of my HP 15-f039wm Notebook PC from Windows 8 pre-installed

  .1 to Windows 7 I have common driver problems.

  I tried the solutions already widely open to the public for similar problems, so far without success.

  Fortunately, I found a working LAN driver. Which remain missing are the drivers for the following devices, especially USB driver:

  PCI encryption/decryption controller:

  PCI/VEN_8086 & DEV_OF80 & SUBSYS_21DE103C & REV_0E

  PCI/VEN_8086 & DEV_OF80 & SUBSYS_21DE103C

  PCI/VEN_8086 & DEV_F18 & CC_108000

  PCI/VEN_8086 & DEV_F18 & CC_1080

  SM Bus controller:

  PCI/VEN_8086 & DEV_OF12 & SUBSYS_21DE103C & REV_0E

  PCI/VEN_8086 & DEV_OF12 & SUBSYS_21DE103C

  PCI/VEN_8086 & DEV_OF12 & CC_0C0500

  PCI/VEN_8086 & DEV_OF12 & CC_0C05

  (USB) Universal Serial Bus controller:

  PCI/VEN_8086 & DEV_OF35 & SUBSYS_21DE103C & REV_0E

  PCI/VEN_8086 & DEV_OF35 & SUBSYS_21DE103C

  PCI/VEN_8086 & DEV_OF35 & CC_0C0330

  PCI/VEN_8086 & DEV_OF35 & CC_0C03

  Unknown device:

  ACPI/INT 3396

  * INT 3396

  Unknown device:

  ACPI/INT 33BD

  * INT 33BD

  Any assistance in finding the right drivers for the above devices would be greatly appreciated.

  Hello:

  Here are links to the drivers you need... including the graphics...

  First install the Intel chipset driver and reboot (smbus controller).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng

  Then, install the graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23714&lang=eng

  PCI encryption/decryption controller:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23677&lang=eng

  USB3:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23734

  Unknown ACPI/INT 33BD

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_132782_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ACPI/INT 3396... that I don't know...

• FCA202 7 - driver problems - Windows 64-bit operating system!

  I had this FCA202 interface today and im having a LOT of trouble of implementation... I got the internet 1.3 update, but it says it's for 32-bit operating systems... and ive tried everything looks... I can't install the drivers! Help!

  Hi Mike,.

  For assistance, please provide brand and full model number.

  We need to check if your device is compatible with Windows 7.  See the Windows 7 Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=FCA202

  You can follow the steps mentioned in the link below

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please contact the manufacturer of your device for known problems.

• Driver problem Windows 7

  Out the installed hard drive IDE (with Windows 8.1) HP Pavilion 15 laptop-e72sa and replaced by a disc SSD Crucial, then installed Windows 7 but cannot get an internet connection. There are yellow warning markers in Manager devices next to the network adapter and the Ethernet controller. The notebook has a Realtek RTL8188EE 802.11bgn Wifi adapter for which I can only find a driver for Windows 8. I tried and I tried to find an appropriate version of driver Windows 7

  Nothing helps. I would appreciate all the advice really.

  Hello:

  You can use this driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124515_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• OfficeJet Pro 8500: HP Officejet Pro 8500 driver for windows 8.1

  I have a "startup CD-ROM' Officejet Pro 8500 A909, Windows 7, Version 13.0.0,, which does not recognize my Windows 8.1. Is there any possibility to get a driver for 8.1, even if there is a fee for this? I need this printer, but it is useless if I can't find a driver to make it work.

  Hello

  If please download and install the following software and driver:

  http://ftp.HP.com/pub/softlib/software13/COL31041/MP-110033-3/OJ_AIO_P8500_A909_Full_Win_WW_140_408-5.exe

  Kind regards.

• Belkin F5D7050 driver problem - Windows 8 Pro

  Hello

  I installed Windows 8 Pro yesterday, I upgraded to Windows 7.

  However, the drivers and compatibility with my Belkin F5D7050 does not work in my operating system upgraded.

  I saw someone post a question on a Web site on the fact that it worked on the preview and not now because you have changed something between the preview and the release. I can't be certain if.

  However ended last night, I managed to uninstall the current driver that is used and then reinstall it from the disk provided with the product.

  Then, I turned on my PC this morning to test the new OS, tried to do the same thing as what precedes, and it's not even plug in or allowing me to remove it from the Device Manager.

  Can you please advise and resolve this issue with me ASAP

  Thank you very much

  Nick Smith

  On the right, Hello all suffering from this problem.

  Here is how we solved the problem.

  Put the installation disc in your PC.

  If you do not have the disc download drivers how you feel are correct.

  Right-click on the installation application, select the Compatibility tab.

  Click on run compatibility troubleshooting, waiting for that it ends...

  Click on troubleshoot program, and then click this program, worked on older versions under Windows but won't install or run now.

  Then select the Windows 7.

  Go there and that definitely solved the problem of their.

  If you have any questions you can contact me here, or @ * address email is removed from the privacy *

  Thank you

  Nick

• HP officejet d155xi - need driver for windows 2003

  Hi all

  I need your help.

  I have a hp printer officejet d155xi and need to install it in the Windows 2003 operating system but, unfortunately, theres no driver available for Win 2003.

  Are you able to provide me with that. Your help is really appreciated.

  Thank you

  lgeood03

  This problem is already solved. Simply download the Windows XP driver and it works to Windows 2003. Thank you all...

• Xerox workcentre pro 423 driver for windows 7

  Hi I have xerox workcentre pro 423 and now I have new pc with windows 7, how can I find driver

  Thanks in advance

  E-mail address is removed from the privacy *.

  "cahit Ceylon" wrote in message News: 2405c33d-35b7-4190-9c5d-8a6bde5c8b72...

  Hi I have xerox workcentre pro 423 and now I have new pc with windows 7, how can I find driver

  Thanks in advance

  E-mail address is removed from the privacy *.

  The Xerox Web site is your best bet.
   
  http://www.Office.Xerox.com/copiers/copiers-under-30ppm/WorkCentre-Pro-423-digital-copier/enus.html
  
  --

  Mike Hall - MVP Windows Experience
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Bootcamp day graphics driver problem "windows 10.

  On my Mac Pro 2013 (with 2015 D700 AMD graphics cards), Bootcamp (10 Windows up-to-date) running, I have problems with the update of the graphics driver this week Bootcamp.

  More precisely:

  * For reading "Star Wars: Battlefront" EA:

  * The game freezes sometimes when she used to never do.

  * Some non-action screens (for example, the dashboard after game) flicker badly.

  * Even after restart again once, graphic poster Apple software update program driver updates that I just installed successfully to be not yet installed.

  I hope that this problem is corrected, because I would like to unlock the power of the D700s dual AMD in this machine.   No foolin'

  Have you created a Windows system restore point before the upgrade? If so, restore and ignore the update until you get an updated version.

• Hard drive problems Windows Vista Ultimate Edition

  Well guys, that it left me speechless.  I recently inherited a laptop from a friend who is fairly new and in good condition.  The laptop, a Toshiba Techra A9, installed Windows Vista Ultimate.  The problem that I seem to have with the laptop is that it will start Windows in normal mode but gets up to a certain point and then hangs up.  I can hear the drive trying to be rolled up and continues to make a rattling noise, similar to a folder that jumps.  The funny thing is that I can turn the machine off and restart in SafeMode w / networking with no problems.  I tried a hard drive cool to think the problem could be a faulty drive, however, the new drive does the same thing.  I installed Vista via the Toshiba Recovery CD, and from the beginning for the first time Windows has frozen, the new hard drive making the same noise as the old.  Anyone out there have any ideas why this is happening?  Install a new hard drive and having the same problem son believe me that it is related Windows or I'll have another hardware problem elsewhere on the machine.  Thank you!!

  Try to check the drivers on the computer to the hard drive. If you can, go to the MMC Console in computer management, go to the Device Manager, and then in the console tree, you should see a line of 'hard drives. Down there, you should be able to see your hard drive. Right-click and click Properties, then go to the drivers of the popup window and note the driver version number. Check on the Toshiba site and see if there are updates to the hard disk driver. If there is, then install it. In addition, you can start safe mode and run your antivirus, assuming that he himself has not been compromised. It seems to be a software problem or driver since you say that you can start safe mode. Timothy

• Linksys WUSB54GC driver problem Windows 7 64 bit - will not allow

  I have a Linksys WUSB54GC 3 Wireless Network Adapter version.  I downloaded the latest driver on the Linksys support page that says that it is fully compatible with Windows 7 64 bit.  The adapter will not allow.  After 3 grueling cat takes support sessions with Linksys, they could not understand it and threw the problem back to my Tower say it must be a problem with my Windows 7 64 bit.  I searched for Windows and Linksys support forums and some people have had luck, and others have not.  The driver has been installed manually several times as well as the removal of material, resettlement and loading the driver again and again.  I am trying to connect to my router Linksys WRT54G which has the latest firmware and has another computer wireless connected to it without any problems.  If anyone can help?

  Hello

  Have you tried the device on another computer just to be sure, does it really work?
  Have you tried another device on this computer?

  Are you logged on as ADMINISTRATOR when you do the work? Right click on the driver
  and RUN as ADMINISTRATOR?

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  The device here is the WiFi device:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.