OfficeJet Pro 8620: Printer - Officejet Pro 8620 Properties window

When I open the window of the printer properties and select the shortcut tab printing, each of the options (general Everyday Printing, printing two sides (front and back), etc.) has a little lock at the bottom of the largest icon icon. Why?

Hello

They are shortcuts predefined and you can't mofify so, BUT you can set or add your short cut (s) If you wish. For example: on my printer, I use duplex as the default value and I have a short haircut called OneSide such when I need one side pring

Kind regards.

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8620: Print in Officejet Pro Office 8620 2103 windows 7 64 bit

    I have exactly the same problem as Lazydog (HP 4920985 Forum post). I can scan but not print MS Office 2010 or 2013 my 64 bit Windows 7 desktop. I can print IE11, Adobe reader, Notepad, MS Picture viewer, but not from Word, Excel, Outlook, or Powerpoint.

    The document will Flash up briefly in the print queue, and then disappears without error.

    Also fails a test print from printer properties in Control Panel. I get a 'cannot print error Test Page'.

    I reinstalled the drivers several times, tried the USB connection or network conections without success.

    I tried the two drivers on the CD, as well as the latest drivers from HP, I downloaded.

    I ran the HP print and Scan doctor and it reports no errors, and I can do a test print of ok.

    I lived all the suggestions provided in the post on the Forum of HP 4920985 and nothing helped. (Turn off the firewall, reinstall drivers etc..) The printer works fine from a windows Desktop 8 and my Windows 7 Netbook and my computer laptop linux Ubuntu 14 running.

    I only had 3 days to the printer, and unless I can make it work soon it goes back to the shop!

    Hi @Krusada,

    At first I thought maybe it was the program, but after some research, I feel, the question may be the driver himself. Please try to use the 8600 as another pilot.

    How to assign other print in different Versions of Windows drivers.

    The link above will guide you through the steps to assign a different print driver, I ask that you choose the 8600 if available, and if not, you can install the base driver 8600 here;

    OJ8600_Basicx64_1315.exe - for 64-bit operating systems

    OJ8600_Basicx86_1315.exe - for 32-bit operating systems

    Is my version of 32-bit Windows or 64-bit?

    By clicking on the icon below the thumbs up, helps me to see that you are grateful and satisfied with my post! If the problem persists, I'll gladly do all that I can to help you

    Please don't forget to let me know if that fixes the problem or not. Thank you.

  • HP officejet pro k5400 print hieroglyphics from my computer windows 7 when network attached so

    my HP officejet Pro K5400 to print hieroglyphics from my computer windows 7 - both when attached USB or Network attached.

    It was printing fine before when network.  has taken a different and trendy site via USB and has not printed correctly since.  Printing a test page for the printer itself works fine.

    Help.

    It's strange.  The driver may be corrupted.  Try using a different printer driver.  You can find the instructions below. Let me know what happens.

    1. Click on the start menu.
    2. Click devices and printers.
    3. Right click on your printer.
    4. Select the properties of the printer.
    5. Click the Advanced tab.
    6. Click new driver.
    7. Click Next.
    8. Select HP in the first list.
    9. Select Deskjet 990c in the second.  If the 990c driver is not there, use the Deskjet 450 driver.
    10. Click Next.
    11. Click Finish.
    12. Click on apply.
    13. Click OK to close the window.
  • After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

    After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

    Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

    After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

    Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

    Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

  • OfficeJet pro 8500 a, Windows XP, printer receives information but prints blank page.

    OfficeJet pro 8500 a, Windows XP, printer receives information but prints blank page.  Test page out of rose.  Ran test, test page out of rose

    The whole page out pink (which means a solid pink page) or is it roses words, boxes, and

  • OfficeJet Pro l7580 on Windows 8: always impossible to install driver

    Reopening of the question of: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-l7580-on-Windows-8-canno...

    Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

    OfficeJet Pro l7580 (connected ethernet)

    Windows 8 64 bit (clean install)

    Driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110039-1&cc=us&dlc=en&lc=en...

    Everything worked fine on Win7 64 bit

    Print with 8 default windows driver

    When you install the driver, the driver installation tells me to "uninstall L7300.

    I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

    I've tried it on 2 computers different windows 8, with the same result.  The driver seems to be fairly broken

    Hi mcevoys,

    I understand that they are freshly installed operating system, but in order for me to isolate as a cause as possible, should be done on at least one of the computers. If you do not want to perform the update to help isolate the problem, then you will need to contact support to see what they can do to help you get this printer is installed on your computer. I would like to know what you want to do?

    Do a Refresh of Windows 8:

    1. hold your mouse at the bottom or at the top right of the screen (if you have a touch screen, you can drag your finger to the right of the screen to the left) to bring up the bar of charms.
    2. click on settings.
    3. click on "change computer setting" below.
    4. click on general.
    5 scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
    6. who should start a wizard that will take you through the update process.
    7. install the printer on your computer

  • HP officejet pro 8600 server windows 2003

    I'm managing a server hosted by running windows server 2003.  I have a user connects via RDP and trying to map printers.  She has a HP OfficeJet Pro 8600.  I can't find drivers for Windows Server 2003.  I tried the XP driver but it will not be installed.  It says I have the wrong software.

    Does anyone have ideas how I can get around this?  I looked into some universal drivers, but they don't make much sense to me.

    I had the same problem when you try to install the self-extracting download driver. OS is not compatible...

    But it's the right driver, you just have to make a way...

    Download and install the driver of HP. (use a third-party zip tool such as 7zip to extract to the folder)

    (http://ftp.hp.com/pub/softlib/software12/COL40127/mp-97860-2/OJ8600_Basic_x86_619.exe)

    Open Printers and faxes on your 2003 Server window.

    Click file, and then select the print server. Install the driver from here. (x 86) Use have disk, and then point to your folder of extraction. Just use the Autorun.inf file.

    He has installed the driver and allowed the printer redirect RDP even a Windows 7 PC

    See you soon

  • HP Officejet Pro L7680 with windows 8

    My original computer has winXP when I bought the printer.

    I used the installation disk to install the printer.

    Worked very well.

    My computer died and I got a new one that has Windows 8.

    I can't install the printer with the Windows XP installation disc

    Can someone help me to install this printer on my new computer windows 8.

    I'm not really sure what to do

    Thank you

    Hello jschembri,

    Welcome to the Forums of HP Support!

    Regarding your request to install the L7680 on Windows 8, I have the solution. Given that the CD is not compatible Windows 8 you can install with this download: HP Officejet Pro Full Feature software and driver.

    This will be just the installer similar from the CD, only specific to WIndows 8.

    I hope this helps

  • OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

    Cannot find a driver for the Officejet Pro 8500 on Windows 10

    Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

    Reinstall the driver of windows 8.

  • HP officejet 4650: how to print a pdf file of windows 10-hp officejet 4650

    How to print a PDF file using windows 10 to a HP Officejet 4650

    You can install Acrobat Reader (free) DC from Adobe here.

  • LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

    On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

    Very hard to advise without additional evidence (such as samples).

    With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

    Attached is a zip container file:

    • Small text in the abcde.txt file that contains the text "abcde".
    • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
    • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
    • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

    Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

    copy  /b  abcde.prn  \\computer-name\share
    

    in a Windows command prompt session, where:

    the computer name is the name of the workstation;

    share is a share of the Windows printer instance name.

    The resultant prints show the watermark of the SAMPLE ?

    If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

    Can generate something similar to your driver for analysis?

    [You will probably need help moderating to attach files in this forum].

  • Canon ip2000 printer driver DOWNLOAD crashes in Windows 7 Pro x 64

    Download as well by automatic installation that appears when I plug in the printer, as well as through Windows Update, crashes at 66% finished. After a while the installation process and Windows Update just keeps sitting there. There is no network traffic. The download of the driver itself is supposed to be 6.9 MB according to the process of installation and 6.6 Mo according to Windows Update.

    Is it possible to erase the 66% already downloaded restart the download completely, as currently, it restarts the process from there, or is it possible to download the driver manually? This is supposed to be a relatively new pilot, published December 20, 2012. Canon offers no download driver for Win 7 for this printer, only pilot addons and another piece of software that helps with the installation of the printer at all.

    Thank you!

    Edited to add: I forgot to mention that the other updated Windows Update download and install correctly.

    This has been fixed, the pilot became available through Windows Update and installed correctly.

  • HP PRO 8600 and Windows 10

    When I had Windows 8 I was able to print double-sided.

    I recently upgraded to windows 10 and rebooted the printer through the computer settings as I did in the past.  However,.

    now, there is no option to print double don't face...

    I looked in properties and advanced settings and nothing.  This is for all the PDF and Word documents.

    Help, please!

    Hi @jstjean204,

    Welcome to the HP Forums!

    I see that you can not print duplex in Windows 10, with your printer HP Officejet 8600. I'm happy to help you!

    It is possible, that a driver conflict is at the root of the problem. I recommend trying the following steps in the following order:

    Then I ran the HP print and Scan Doctor, to check that everything has been installed and working properly.

    I hope this solves your problem and I thank you for posting!

    "Please click the Thumbs up icon below to thank me for having responded."

  • OFFICEJETS WORKS ONLY WITH WINDOWS 7

    I can't believe that HP has no driver packages available for the Officejet Pro 8500 for Windows 7 range.   I was told this morning that HP will not available until end of January full driver packages.    Can we say Epson or Canon?

    Base and full recommended Win 7 drivers for the 8500 Officejet are now available for download from HP.

  • PIXMA Pro - 100 and Windows 8.1 help please...

    Hello

    I'll try to be concise

    Spent the whole day on the phone to do this without the same answer twice * sigh *.

    I was told and I read again and again that YES, Pro-100 WILL absolutely work with Windows 8.1.

    Then... It is possible that it will NOT work unless I have 8.1 Pro Pack.

    Is this true?

    IOW... Is there anyone using the PIXMA Pro-100 with Windows 8.1 * without * Pro Pack very well?

    I ordered the printer yesterday before being told this topic and need to know if I need to cancel my order before it ships.

    I thank very you much for any help.

    Sherri

    Hello!

    If it is a question of time-sensitive, we suggest reaching out to our support team for assistance. The Forums are not intended for immediate assistance, but are designed to allow the community help each other with problems encountered or advice, they would like to share along the way.

    Our support team is ready to help you 24/7 by Email http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

    We hope this helps!

Maybe you are looking for

  • Remove the iWeb site

    I created a site for my organization using iWeb. About 12 months ago, we changed our host (for Wix), but I still have a customer who pays to see the old site even after their cache cleaning and using different browsers. I have more access to the comp

  • Help with emails lost on the version of outlook express 6

    Outlook express deleted at random 2 years worth of my emails. Is there anyway to get back them. ? They are not in the deleted section

  • Timestamp event veiwer divergence issue

    My HP under Vista Home Premium laptop wakes up every morning around 03:00. I'm going nuts here. OK, I tried to use command prompt "powercfg - LASTWAKE and I get the count of the history-1, then history [0] and County source for zero.» So I'm going to

  • HP Pavilion dv7-4151nr broken hinges

    Looking for specific instructions to dv7-4151nr to change the left hinge broken myself.  HP does not list the hinge as a spare part for would appreciate suggestions to find the part from a reliable source. I found videos and instructions for other HP

  • issue of cameraView show

    I'm trying to get the cameraView show, but when I open the map it shows just the underlying page.  What funny, however, is that the camera takes pictures when I touch. This is the code for my camera QML: I call this QML leave of a spreadsheet, don't