OfficeJet Pro 8620: Problem with two-sided printing by default settings Officejet Pro 8620.

Similar Questions

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• What would cause two-sided printing is not working properly in Acrobat Pro and InDesign?

  I need help with a problem of double-sided printing that occurs only with a document created in InDesign, and then turned into a PDF Acrobat file. It is a simple single page 3, paper 8.5 x 11 with nothing weighs on the marges.5. I went to print it out on my Epson Stylus 7620 duplex, but it does not print correctly. It is printing page 1 on a single sheet of paper without even attempting to add the second page. Then it prints the third AND second double-sided pages. I looked to make sure that there is no box "print separate cover page" checked. I also made sure 'normal pages order' has been selected and not reversed. I checked to make sure that nothing was hanged on the page which may cause the printer to that there is an additional page between pages 1 and 2. I turned the document to Adobe PDF (for InDesign), but the PDF did the same thing. It prints 2-3 as a double-sided pages and page 1 on one page on a single sheet of paper. Obviously, I want 1-2 pages to print double-sided and 3 of the page into a single page. I called Epson, but they said that because other documents are printing correctly, it is not a printer problem, but Adobe software / printer box question, very probably in the InDesign document. I can't find. Has anyone else encountered this problem? Can someone help me with this?

  Using Acrobat Pro and InDesign in creative cloud. MacBook Pro running 10.11.4

  You'd better ask this question in the InDesign forum where more people we'll see.

• Photosmart 7525 does not as advertised two-sided printing

  I just bought a printer Photosmart 7525, partly because my upgrade to Maverick on my MAC is my 3200 Series obsolete and she was acting strangely.  The new printer has taken longer to implement than I expected (not exactly an intuitive process and he had not provided all the guidance documents). I managed to get more work, but there is no option to select two-sided printing when you print directly from Word. I had to go through 3 non-intuitive screens to find the print options for the pages even / odd - it's much easier to save in pdf format and get rid of Acrobat.  But I still do not think the double-sided printing option that is promised in the product documentation.  I find some online reviews maybe I need an accessory, but I thought that the product has come with the ability.

  Please notify.

  Thank you

  Hi hybridgeek,

  Thanks for keeping me posted. Unlike programs preinstalled, Mac print options two sides is hidden in settings. If you open the print dialog box, click on the area of lowest selection - Copies & Pages, select from the drop down.

  Set the duplex option as the binding Edge Long (Portrait) or binding Long Edge (landscape). You can save the settings for later use by clicking preset > save current settings as a preset and naming.

  Source: Post Re the ShlomiL: how to double face printed word when NO option for "2 Facer" when printing on HP

  Please let me know if that fixes the problem, thank you

• C7250 printing duplex job, popup saying "automatic two-sided printing Module missing."

  Hi, whenever I try to print double-sided, I get the popup that says:

  "The document has been configured to print by using the Automatic Two-Sided Printing Module, but module is not installed in the device. The document will be printed recto. »

  After I pressed the 'Print' button, job goes to the printer and print OK as a duplication. You can fix this? I have this problem for a year now, and I'm tempted to this problem.

  And he sees in duplex printer properties.

  Thank you.

  Looks like the problem disappeared after the software update. Thank you!

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• OfficeJet Pro 8660: default margins with double-sided printing

  I have a 8660 OfficeJet Pro connected wireless via a network to two computers, one running Windows 7 and the other running Windows 10.  On the Windows 10 machine, I noticed that when I print on both sides of the paper, the default printer to the print wide margins (1 ").  For example, I have a 3 pages with 0.25 "Excel document margins.   If I print it in the form of three separate pages, it prints very well, with margins as I have defined it.  But if I print the same document using the option "print on both sides", the printer uses the wider margins.

  This only seems to happen on Windows 10 machine.  Given that the two computers are connected through the wireless network, I do not understand why they should all work differently.

  I hope someone can help!

  Hi @Patti_Mik,.

  Please get back to me and provide other information. I see that you have the printer Officejet Pro 8600 Plus.

  If the same document print from another computer, there is probably a problem with the driver for printing on Windows 10.

  Please download and run the print and Scan Doctor, to confirm that you are using the correct printer driver.

  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?

  In addition, I would like to try to create a custom paper size to see if you can get it to print properly.

  • HP printers - creation of custom paper sizes

  What program are you printing from?

  • Try to print the document to a different application.

  Please reply to this message with the results. Good luck!

• HP OfficeJet Pro 8610: my printer HP Officejet pro 8610 ceased two-sided printing

  Even if I check duplex printing as my selection, the print job is unilateral.  This feature is used to work perfectly.  Does anyone know how to fix this?

  Hi @-donna-1,.

  Thanks for getting back to me.

  Did you follow the steps described in the guide to see if you have the HP two sides printing accessory (duplexer) installed?

  In the section: How can I auto duplex if my printer support?

  If the problem persists, follow these steps:

  Fix permissions of the drive on the Mac:

  1. Close all applications.
  2. In the Apple menu, click OK, click Applications, and then click utilities.
  3. Double-click disk utility.
  4. Highlight your hard drive / partition on the left.
  5. Click on check and then repair disk permissions.
  6. Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  1. Click on the Apple icon and then click on System Preferences.
  2. Click on printers and scanners.
  3. Make a right click (or Ctrl + click) in the left white side panel, and then click Reset Printing System.
  4. Click OK to confirm the reset.
  5. Type the name and the correct password.
  6. Click OK to reset the printing system.

  Add the printer:

  1. Then click the + to add the driver, select the printer (you may need to click the drop down menu to select the name of the printer).
  2. Then click the Add button. Do not add the AirPrint driver.
  3. Now, try to double-sided printing.

  I hope this helps.

• HP Officejet Pro 6830: Problem with head of printing and error 0xc19a0020

  Tried on MS 8.1 64-bit and Mac OS.

  Having a problem with the printer.

  Constantly saying problem with printhead 0xc19a0020.

  Tried the troubleshooting suggestions, no results.

  I tried unplugging ink and placed back, even.

  Any suggestions? Should I replace the print head? Possible with warranty?

  Hi @Sergey_Burnos

  You will need to contact HP Support to obtain a replacement. Are you based in the United States? If so, please call 1-800-HP-invent (1-800-474-6836).

  Can you please let us know how you get on?

  Thanks, Ciara

  http://support.HP.com/us-en/document/c04839288

• Need help with the issue of two-sided printing

  We have a printer D1350.  It is directly connected to a PC and shared with other computers on our network.  In the past I printed two-sided with binding on the long edge with no problems at any one of the computers.  Recently he began to ignore my settings and print double-sided copies with link short edge no matter how I said to print from a PC.  All other PCs are able to print correctly.

  All PC's had Windows 7 OS when the problem started.

  We have upgraded to Windows 10 and the printer does not at all, we uninstalled the printer drivers and then re-installed both and it will not print correctly from a PC.

  I checked for updated drivers, still will not print properly with a PC.

  What arrangement could have changed on this PC it's ruin?

  Help!

  This is not a Canon support site. Its a forum of the users in charge.

  Give Canon a call at 1-800-OK-CANON.

• Example: HP PHOTOSMART 7529e: how to make two-sided printing automatically with printer HP 7520

  All I'm doing is to make my printer two sided front or double.  No matter what I check IT DOES NOT WORK.  I checked "2 sides, 1-2, NOTHING.  What amazes me is that it worked until recently and now he just does not have double-sided printing.  I'm probably doing something wrong, but WHAT?

  filgrastin

  In General, duplex printing is consulted / adjusted printing preferences.

  If you print from an application, for example, in Word or in your browser, you reach the printing of the preview preferences before printing.

  Reference:

  Manage the print with preview output before printing

  Excerpt:

  • Print - print options access preview

  The browser page > file > print > properties

  Access Printing Preferencesproperties:

  Paper Source (tray selection), paper size, media, Orientation, print on both sides, page order

  Reference: Printing Preferences

  ================================================

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• strange problem with two Cruzer 32 GB flash drives on XP Pro

  I have two Cruzer 32 GB discs that will not work on a particular PC running XP Pro SP3.

  The readers work in other PC running XP Pro and PC running Windows 7.

  Now, until someone says, "it's obviously a problem with the PC" I have to say that USB Flash drives other works very well in this PC manufacturers, as does my Seagate FreeAgent Go drive (so it is not a question of power).

  Flash only readers who present a problem are the readers of Sandisk.

  When I insert the Cruzer it flashes slowly then after maybe 20 seconds start blinking quickly and continues to do so as long as she remains inserted in the USB. There is no indication on the screen it was inserted - nothing ofering to the media browser, files, etc.

  The drive appears in my computer as drive F removavble, but no file or folder is visible.

  When I go to administrative tools > computer management > disk management, disk is NOT visible, it is not visible as a removable drive.

  In Device Manager it appears as SanDisk Cruzer USB one, using a device driver Microsoft date 01/07/2001.

  I tried to uninstall this device, removing the Cruzer then turn the PC, but when I plug it in there new detects new hardware - Sandisk Cruzer and drive hard, but then says that it can not work properly and invites me to restart the PC. Subsequently, he then returned to the symptoms described above.

  The TWO Sandisk Cruzer 32 GB disks with the same problem.

  Someone at - it any other ideas?

  Thanks pechter!

  Kies was the problem.

  I followed the instructions in this thread http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/sandisk-cruzer-blade-problem-troubleshooti... and it cures the problem.

  I must point out that it has not affected any other brand of flash drive I've tried, the incompatibility seems to be only between Sandisk Cruzer and Kies, leads me to conclude that this is a problem of Sandisk.

• LaserJet P2055d: LaserJet P2055d two-sided printing problems

  I have a new computer with Windows 10.  I have connected my LaserJet P2055d and recognized Windows and the driver PLC6.  I don't have the ability to print double-sided, like I did when I was with this printer with a computer running Windows 7.  Any advice would be appreciated on how to acquire the ability to do double-sided printing.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• CP10518ni: Manual two-sided printing problems

  Ever since I bought a new computer with Windows 8.1 I don't have the ability to duplex manually.  There is still no choice to set up manual duplex printing.  I print a lot of documents, and I would like to save the trees (and silver) by double-sided printing.  Can anyone help?

  Thanks – it worked!

• HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

  PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

  I always get the same message!

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!