OfficeJet Pro 8625-impossible to scan documents to PDF format with windows 10

Similar Questions

• Photosmart premium C309g-m: lack of disk space when scanning documents in pdf format for PC

  When you try to scan documents to pdf format on my computer (connected via a wired network), including multiple pages, the throws of sweeping to the top of this error message 'More disk space - remove unused files to free disk space' the error code below is 4, [(3,11,0)].

  I seem to be OK with a single page at low resolution in B & W - 150 dpi but not more than a few pages to this resolution, or even a single page to a higher resolution and the error message is thrown upwards and will not save the file. Clearly I'm not memory hard drive because there is a lot of space and I tried recording on multiple disks.

  If I scan everything straight to a USB stick plugged into the printer it works OK but scan documents as a picture and crops, more it only scans one page and then save it.

  I tried to install a patch from this forum question http://h30434.www3.hp.com/t5/forums/postpage/board-id/Scan but it made no difference and my windows 7 was not an upgrade of vista

  Hope someone can help with this

  Hi Oscardod,

  You are welcome!

  I guess one inadvertently lead solution, is always a solution! Laughing out loud.

  I'm glad that everything is fine.

  Best regards!

• HP Officejet Pro 8625: HP Officejet Pro 8625 impossible to change the order of printing back to the front and want to change

  HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change

  The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625.  You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here.  When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later."  After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done.  Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK.  The Page order option will be available in the Advanced Printer Options tab.

  

  

• OfficeJet Pro 8600 Premium can scan double-sided legal format of the ATF documents?

  I can't get the award-winning Officejet Pro 8600 to scan one side of a document of legal size of ATF.  I use Panel of the printer to scan to computer and save to the PDF format.  I select original: two-sided in the Panel.  The printer will scan only on one side and an error message appears saying that the tray supports that double-sided scanning for certain sizes of paper.

  Hello

  Thank you for your message.

  Unfortunately, the ADF can scan only 1-sides for legal-size documents.

  You can, however, use the software to "Add pages" using glass as the example below.

  

  Hope that helps.

  Please click "Bravo Thumbs up" on the left, if it helped you and 'Accept as solution' If this helped solved your problem.

• HP Officejet Pro L7788: impossible to scan/print on my officejet pro l7788 glass

  I can't print or scan with my all in one HP Officejet Pro L7788

  I try to use the glass, and he doesn't even move. It is only by using the top drive. I don't know why. I have no paper, only on the glass. And it does not work for either. I don't know what to do. Its really pissing me off.

  It is connected by USB.

  Best work properly either. It was when first, you have the printer not for long.

  Print and scan from different programs?

  Yes, I have uninstalled and reinstalled the program

  I have Norton

  Disable my antivirus? I just got it recently. So I don't think that's the problem. but who knows

  Earlier, I ran the Dominican Republic and my test print came out bad, after evaluating it well enough get the heads cleaned and aligned. I did the same thing * beep * several times. Its getting old! In any case, I did two test and they are not 100%

  I not did nothing to my whole upward. When I first came to this printer I actally printed and scanned picture perfect. Now, it does no good.

  I have the printer connected to the surge.

  Updates for my windows... Perhaps. It updates automatically things

  the usb cable seems to be well. I don't think that's the problem

  I also tried scanning a page with written things on and when it printed the page came out all messed up children. Not a single thing written on the original was released.

• I can scan is no longer in PDF format with windows 8 - why not?

  Using my Dell 2335dnMFP printer, I was able with Windows 7 to select a scanned document PDF format and save it in a file.  Now with a new 660 Inspiron and windows 8 document scan program does not give me PDF option. I installed Adobe reader.

  Hi John,.

  I understand that you are unable to scan in PDF format.

  1. do you get an error message?

  I suggest to run the following steps and check if it helps.

  Method 1:

  I suggest you to install the latest driver and application scanner Manager / of the Dell Web site.

  You can refer to the city link below to download the latest driver.

  http://downloads.Dell.com/pages/drivers/Dell-2335dn.html

  If the problem persists, please get back to us to troubleshoot further with the results and other information.

• OfficeJet Pro 8630: impossible to scan

  I get the following error message when you try to scan a photo to my computer:
  
  The HP scanning application does not contain a shortcut corresponding to your selection.  Please uninstall and reinstall the S/W provided with your product.
  
  I did a full download and install from the software download page and drivers and still get this error.   It's not like I've not scanned before.  So what's happening?  My daughter needs this analysis for a school project.

  Hi @bhlass,

  Thanks for getting back to me. This error occurs when you try to update the software of the printer with a newer version of the software before you remove the existing software.

  Here is the document of support for this error - ' Installation error 2081883401: failed to uninstall the device with serial number:..' Error Message on the computer. The latest operating system, it lists in Windows 8, but the steps in Windows 8 should be the same as Windows 10. Try this and then retry the HP printer install wizard .

  Please let me know how it goes.

  Thank you.

• HP officejet pro 8620: impossible to scan a full A4 page on my HP Pro-8620

  I have the same kind of problem:
  -windows 7 64 bit

  -USB connected printer

  Using the ADF or the glass gives the same result: 1 or 2 cm from the bottom of the page is missing (signature...)
  When I put the document he on the glass, it does not exceed the A4/demarcation framework
  I have not found something to calibrate
  Thank you

  Click on the thumb BRAVO upwards on the left to say 'thank you '.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Hello

  Normally you can change the scanning area. Please edit in the next menu when using the software of dcan for your count:

  

  Kind regards.

• HP officejet Pro 8600: lines on scanned documents

  I'll have one with the line from the top to bottem of page on scanned and coppied documents. Can someone help me find the problem? Printing from my computer is perfect.

  Scanning using an ADF? Most likely, there is a stain on the scanner glass, try cleaning the glass with a piece of lint.

• HP Officejet Pro 8600 Plus: I'm trying to troubleshoot printer with Windows 10.

  I removed my original pilot, launched my CD orig who downloaded correctly.  When I go to find in my device Mgr it sees and as to continue through the wizard to add to my HP Pavilion he asks that I add the "WPS" I can't find it anywhere in my manual or my printer.  How can I get my WPS so I continue and restore this printer with Windows 10 settings?  Then I should be able to download your drivers 'full foot' and the laptop talk to the printer (at least I hope it's going to happen).  Currently you can only print via USB then please get back to me with an answer as soon as possible.

  Hello

  The CD may be a little old. Please download and install the software and the following driver on your Windows 10 computers (new or updated):

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• How to convert a word document to pdf format, with the player on my microsoft surface?

  I do not know how to accomplish this task, and it doesn't seem to be an easy way of suggestions?

  Hi camdene84034290,

  Download latest Adobe Acrobat Reader DC Acrobat Reader DC Learn & support, Sign In using your Adobe ID to use the service to export it to PDF using Acrobat Reader. Export PDF to Acrobat Reader DC.

  Kind regards
  Nicos

• Export a page of a document in PDF format with compression settings different

  I think that what I want is not possible, but I don't know until I try...  I have a template that we use a lot in our marketing material that seems not good on the screen during the export of smaller file size.  Is there a way that I could export a PDF file with just that image or the page that it is set to a higher resolution?  It justified for the moment if I export the page separately and combine again in Acrobat afterwards.

  Have you tried playing with the PDF export settings? Specifically, if

  you're the subsampling this pattern, try a different subsampling method.

  For example, if there is a lot of fine lines in the image, try the nearest

  Neighbour to keep those. This can have a significant effect on an image and a

  negligible effect on others, so maybe this is what you need. Just a

  shooting in the dark without actually seeing the images in question.

  Ariel

• OfficeJet Pro 8625 black ink cartridge setup snap

  I am trying to install our new printer Officejet Pro 8625 and the black cartridge (950) that came with it does not come off in place. Every time that I push it in it jumps out. I tried to use another cartridge (950) that was in our Officejet Pro 8600 and she also wouldn't install despite editing perfectly in the other printer.

  Hey @millconst ,

  Thank you for taking time in your day to ask this question on the HP Forums today!

  It's clearly a hardware problem if different cartridges component snap. I STRONGLY recommend that you call into Technical Support HP.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• Windows 7 do not send documents to Hp Officejet Pro 8625

  Someone had a problem with Windows 7 release do not with the HP Officejet Pro 8625 all in one.  I can print wireless from my Mac Book Pro, but not from my Acer laptop with Windows 7.  When I send a document to print from my Windows 7, I would like to scroll over the icon in the task bar printer, he would say

  "the '0' documents pending administrator" and would not print then the icon disappears.  Help!

  Although the term "recovery disc" is used for various different things, if you did in fact a set of recovery disks (i.e. more), they are used to restore your computer to the State in which it was when you made them.  See, for example, https://neosmart.net/wiki/acer-recovery-disk/#Create_the_recovery_disk_in_Windows_7 that you probably don't want to do except that really a last resort.

  If you have actually done a Windows 7 "repair disk" (which is a single disk), which in itself may not reset the administrator password, but read on.

  What is the password for the built-in Administrator account is, Microsoft (that hosts these forums) has a policy that does not allow anyone to give advice on these forums on move the lost passwords.

  See http://answers.microsoft.com/en-us/windows/forum/windows_7-security/keeping-passwords-secure-microsoft-policy-on/39f56ef0-5d68-41ad-9daa-6e6019c25d37

  About all I can tell you is that it is possible to reset the administrator password.  Google is your friend.

• OfficeJet Pro 8625: HP8625 sleep mode/wireless network connectivity

  I recently bought an OfficeJet Pro 8625 and it worked fine for a few days, with everyone in the House, being able to print wireless connection network (Verizon FIOS via an Airport base station).  However, now it won't keep (or restore) a Wi - Fi connection after going to sleep.

  I can get the printer to work, if I turn it works, then immediately print (but only one machine... If I need to print from two different computers, I have to restart again to use the second computer).

  This is the case for all computers in my house - using several OS X (El Capitan, Mavericks and Snow Leopard) and the other with Windows 10.  I tried the troubleshooting tips that I could locate, and the firmware is up to date.

  I should be able to send a document to the printer from anywhere in the House, from any computer, without walking to the printer and restart it first.  A network printer should be sprained able himself, reconnect to the wifi and print jobs sent to it, but mine doesn't.

  How can I solve this problem?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php and powerful Scan at the end.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.