OfficeJet pro 8630 + is not centered copy - printing and scanning ok

Older than two months Officejet Pro 8630 (> 400 pages) - copies of plate or charger are shifted to 3/8 of an inch on a side. Printing from computers or scanning is centered.

FDP1CN1416AR firmware version

Using tray 2 by default. Tray 1 is used for printing the envelopes.

Thank you

I found that turning on/stop margin shift and turning on the margins by default button a few times eventually set the output to the centered normal copy.

If the settings are now to original (shift off and default on) the printer now copies centered. Must have been a burp of firmware. If that happens again once I try a hard reset to clean.

Thanks anyway.

Tags: HP Printers

Similar Questions

  • HP Officejet Pro 8600 N911g can't always print and scan after turn on Mac from sleep

    Dear community:

    It's my printer:

    1. number and product name

    HP Officejet Pro 8600 N911g product name product model number product CM750A the serial number {private information deleted} ID Service 23022 Firmware Version CLP1CN1150CR Total number of pages 4187

    2 operating system installed (if applicable)
    Mac OS X 10.7.5

    3. error message (if any)

    After several problem that prevented me print I uninstalled all the HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro - 8600_v12.23.0.dmg after full I can print and scan. then I go home and put my laptop to sleep. After that I go back to work this morning I cannot print and scan again. HP utility impossible to connect to this printer because all of the information here (all fields) will appear as: unknown please help.

    4. all changes made to your system until the problem occurred
    Nothing. I just put my Mac to sleep and then back on.

    5. in the title of the topic, include a brief and accurate description of the problem and your product information (e.g., product name of your laptop, laptop computer, printer and other device, etc.)

    After several problem that prevented me print I uninstalled all the HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro - 8600_v12.23.0.dmg after full I can print and scan. then I go home and put my laptop to sleep. After that I go back to work this morning I cannot print and scan again. HP utility impossible to connect to this printer because all of the information here (all fields) will appear as: unknown please help.

    Is there someone out there who has an idea on how to solve this problem? Thank you in advance.

    Try scanning with picture Capture in your Applications folder.  Click the scanner on the left, click View details in the lower part to reveal a bunch of settings on the right side.

  • HP Officejet Pro 8630: HP Officejet Pro 8630 - do not print red

    Hi, I'm very happy with the HP Officejet Pro 8630. I am registered to instant ink HP and going well. My problem is that my printer prints yellow instead of red. IE, write in red text is printed in yellow. It's the same thing if I print a web page for logo etc... sometimes Ribbon appears in green - checked ink - OK - alignment levels heads of fine - print - run calibration - ok all help much appreciated Marcus

    Hi, I have my leash on 24/7.

  • HP OfficeJet Pro 8710: HP OfficeJet Pro 8710 print do not tried HP Print and Scan Doctor

    Hello HP Forum,

    I'm new and have read many articles on printing does not. I had this printer yesterday and I was so excited to use it! When came home... DOH! Nothing prints not! So, I used the print and Scan doctor and that fixed it... temporarily. Now it won't print and print and scan doctor said nothing! I printed something this morning, but I saw a mistake, then I went to print it again, nothing would have uttered. I'm getting a little angry that I (May) have lost $170 on this thing.

    I could really use some help please! If not, I just lost $170 on this thing.

    My system is Windows 10 1511 Pro 64 - Bit, and the printer is USB connected.

    Thanks in advance,

    HPOJPro8710

    Edit: I just tried printing HP and Scan Doctor 4.9 once again, now it works again. But this will not last forever, I need a permanent solution.

    Edit 2: I forgot to add that I intend to leave it on all the time. It is good to do? Causing my problems?  My grandparents have their HP OfficeJet Pro 8600 24/7 for I don't know how many years! haha and they have no problem!

    I got a HP OfficeJet 4630 USB connected, and I turned off each time and printed correctly. Only had to fix once with HP print and Scan doctor.

    Hi, seems that your computer is powered off the USB ports to save energy.
    Check in the Device Manager.
    Check under USB controllers.
    Check all USB hub root.

    Select power management and ensure that:

    Allow the computer to turn off this device to save power is DISABLED.

    Use a USB cable of good quality, not more than 6 feet long.

    Connect the 8710 directly to a power outlet wall.

  • OfficeJet Pro L7680 cannot NOT CHANGE of PRINTER offline online

    OS is 64-bit WIN8.1.  In devices and printers State appears offline.  To see which print drop-down list under printer shows that this printer use offline is not checked.  Printer is on a home network.  Print from another computer on the network.  Downloaded the latest version of the HP driver and still does not have goback online.  Looked in properties, preferences, etc. and could not find any way to go from offline to online.  How can I go from offline to online?

    Gemini02

    Two problems.

    I just kept on uninstalling and reinstalling the printer and it worked finally.

    Thanks for your help.

    jdmosk

  • OfficeJet Pro 8610: No desktop Windows 7 printing and Officejet Pro 8610

    I bought and installed a new 8610 Officejet Pro about a month ago.  My desktop computer is a unit of HP Windows 7.  The printer is wireless.

    Until a few days ago, everything worked fine, but now I can't print anything from my desktop computer.  Printing from my computer MacBook laptop works very well.  Printing from my iphone is fine.  Digitization of the desktop computer is fine.  Webprinting is fine.  The printer icon has a nice green checkmark in the devices folder.

    I ran printing HP and doctor Scan, which claims to solve a problem of port, but does not solve the problem.

    I use windows to troubleshoot the connection, claiming to make the printer available to my homegroup, but it does not solve the problem.

    I tried to change the security settings for the spooler.  Has not solved the problem.

    I can not manually stop and star the spooler via prompt back.  Said system 5, access denied error.

    It's maddening.  I got rid of my old printer (which must be printed from the office) so that I could have a capacity of wireless printing, and now I have the ability wireless, but impossible to print from my desktop.  Aaaaggghhhhhh!

    Hey @steplaw,

    Thanks for getting back to me on this subject. Now I'll have to charge you another Officejet driver on your product. Because the network connection is fine, and scanning is still fine, I do not think that the problem you are experiencing is connectivity or related software. This driver replacement, I'll have to charge you will work exactly the same way as the e-all-in-one printer driver Officejet Pro 8610. Therefore, you won't lose all the features by this fix. Please, try the following steps.

    Step 1: Clear the temporary files:

    1. Click on the Start menu
    2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
    3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
    4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
    5. Close the Temp folder when it is empty
    6. Right-click the recycling bin on your desktop and select empty recycling bin

    Please proceed to the next step.

    Step 2: Load driver replacing:

    1. Please click hereto download the Officejet driver
    2. Once the download is complete, you can get a command prompt to run the download. If you see the prompt run, please let it run.
    3. An extraction should now take place. When the extraction is complete, an install window can jump open. Please close windows install everything. You do not want to run a facility.
    4. Then, click on the Start menu. In the box "search programs and files" type folder and press enter on your keyboard
    5. When the Temp folder opens, find the file 7z. Click this folder to open it. It should include files that say OJ860
    6. At the top of this file, you will see a file path bar. It may show something like "computer - disc Local C - users - AppData - Local - Temp - 7z... " Left click on the right side of this path to file on the top bar. The path should now highlight.
    7. Right click on the highlighted file path and select copy
    8. Close the Temp folder
    9. Click on the Start menu
    10. Select the devices and printers
    11. Right click on your HP Officejet 8610
    12. Left click on printer properties
    13. Left click on the Advanced tab
    14. Left-click on new driver
    15. When the new window opens driver hit please 'Next' until you see a list of manufacturers and Printers
    16. Click the "disk" button at the bottom right
    17. When the "install from disk" window opens, we simply right click on the file path bar and 'Paste' in the path to the copied file previously.
    18. Click OK
    19. When prompted choose the HP Officejet 8600 printer and click "Next" until the driver window add farm
    20. Under printer properties , select apply, but don't hit not OK
    21. Select the general tab
    22. Rename your printer in HP Officejet Pro 8610
    23. Click OK

    Now that the other pilot Officejet was responsible, please test print in order to confirm if the printing problem is resolved.

    Please let me know if the steps I have provided resolve your printing problem. Good luck!

  • C410 copying, printing and scanning problem

    My printer will print is more, scan to USB or copy of glass. Everything I try to do records a "document feeder error" even though there is no paper in the feed. More curious, it's done, it produces this error message when I try to scan to a USB flash drive. I tried to restore default but that did not work.

    You scan from the ADF or the scanner glass?  Looks like you may have a stuck ADF who reports an error.  I would say troubleshooting steps in the paper here.

  • OfficeJet pro 8630: Officejet pro 8630 does not print documents from microsoft work.

    Microsoft Word and Excel documents (Office Suite 2013) not print not... not even a reeling.  All the rest reels and prints.

    Printing a shaw wireless router.

    Hi @sky9,

    Thanks for the reply.

    The version of MS Office is not the problem it's the corruption on the computer. I recommend that you uninstall and reinstall MS Office and ensure that the updates of Windows are updated.

    If the problem persists, please contact Microsoft.

    Thank you.

  • OfficeJet Pro 8630: 2 Facer of default print

    I tried set up printer for printing options 2 sided printing but will not print on 2 sides. I have set up 2 sides print so I don't have to do it manually every time.

    The selection of the status bar can be made in paper/quality of the driver settings.  Options are available for Tray 1, tray 2 or automatic.

  • ALL IN ONE OFFICEJET PRO 8600: HP all in one printer cannot scan after upgrade to WIN7

    SINCE the introduction to LEVEL FOR wIN7... COPIES of the PRINTER, BUT I cannot NOT SWEEPING or POSSIBLY FAX (have not TRIED THE LAST ENCORE).

    PRINTER MONITOR SAID TO CHECK THE CANDLES, ETC., BUT ALSO MENTIONS NOT INSTALLED OCR SOFTWARE NOT?

    I DOWNLOADED WHAT I THOUGHT, IT WAS THE LAST LINK TO ONLINE (SOFTWARE AND DRIVERS). DOWNLOADED, COULD NOT INSTALL. CONTROL PANEL I CAN NOT EVEN UNINSTALL HP PRINTING PROGRAMS TO REINSTALL THE NEW LINK.

    CAN SOMEONE HELP ME?

    Thank you.

    HAVANESE

    Hello Maltesem,

    I'm so happy to hear that we were able to get the problem resolved for you.  It's great! 

    As for the small pop-up that appears when scanning, which is part of the new software and cannot be removed.  I know this can be a bit of a pain if you are not used, but it is convenient if the scan does not look right and you want to cancel it.

    If you have any questions or concerns, please by all means email me back and I'll be happy to help you at any time.

    See you soon,.

  • HP Officejet Pro 8615: ADF not pull the documents for scanning

    I was initially able to scan several documents in the automatic document feeder, when I created my machine, but now I can scan only one document at a time on the glass. I have the good setting chosen "pick the busy document feeder" in the settings, but there is not away from there? Help!

    Hello

    Thank you for using the HP forum.

    Can you open the ADF and look for any paper debris?  Was there a "Ding" when you load your document into the ADF?

    In addition, the Green must lock be in central position (you can try to push forwards and backwards, it should be in central position)

    Thank you.

  • HP Officejet Pro 6830: Problem with head of printing and error 0xc19a0020

    Tried on MS 8.1 64-bit and Mac OS.

    Having a problem with the printer.

    Constantly saying problem with printhead 0xc19a0020.

    Tried the troubleshooting suggestions, no results.

    I tried unplugging ink and placed back, even.

    Any suggestions? Should I replace the print head? Possible with warranty?

    Hi @Sergey_Burnos

    You will need to contact HP Support to obtain a replacement. Are you based in the United States? If so, please call 1-800-HP-invent (1-800-474-6836).

    Can you please let us know how you get on?

    Thanks, Ciara

    http://support.HP.com/us-en/document/c04839288

  • OCR HP Officejet Pro 8600 Plus: Not an option on the scan

    Software Windows 10 HP has been loaded online.  I couldn't use the CD that came with the printer.

    Previously, using windows 7 software and the driver have been loaded FRO CD and included the option of OCR and tools.  I have these on the current installation.

    Help

    JO,

    Download and install the full feature software below, to ensure that the IRIS OCR reading software is installed as a part oh the:

    http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

    Shlomi

  • HP Officejet Pro 8630: Test Print "error - printing".

    Hello

    I have problems printing in the main printer in my office, the HP Officejet Pro 8630. Some work colleagues print to this printer without problem, and others have gave up on it as well. I have no printing problem with HP Officejet Pro 8600 to an office close to home.

    I have finally connected to this printer manually, using its IP address, because it does not appear in the search "add a printer". When I try to do a test print, in the print queue of the printer window, it shows its status as 'Impression' for a brief moment before changing to "error - printing".

    Honestly I don't know what else to do without disturbing the few people who are successfully using this printer. I hate my work colleague whenever I need to use their printer bug.

    Hi @klewald,

    I want to help you with printing problems you encounter. I understand that you can not print, but your colleagues can. I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When address us the issue, I would you kindly mark the appropriate post as accept as Solution so that others have the same or similar problem can find what worked for you.

    In my opinion, the best approach is to start to run printing HP and doctor Scan because if it does not solve the problem, he could at least help to identify the root cause and point us in the right direction.

    Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

     
  • HP Officejet Pro 8630: HP Officejet Pro 8630 printing problem

    Hello

    I have a printer HP OfficeJet Pro 8630 with two different computers connected on it. I have no problem printing from the computer that I use every day, but when I try to print from the other office, nothing happens. The second recognizes the printer and says it is connected, but it does not recognize the printer. In the meantime, I can turn around and print something on the computer to work immediately after I try to print on the other. If anyone has any suggestions, I would be very happy! Thank you.

    Hi @AdminGuy,

    Thanks for joining the Forums of HP Support for a solution to your printing problem.

    I understand that you have a HP Officejet Pro 8630 e-all-in-one printer is connected to two computers via a wireless network, the main one has no problem printing, but the printer is not responding to print jobs sent from the second PC. I would like to help with that.

    Is the PC that does not work with the printer to Apple or Windows computer, and what operating system is running?

    If it's a Windows PC, try to download and run the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

    Please get back to me if you want.

    If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

Maybe you are looking for

  • Firmware for the SSD THNSNJ128G8NU

    Hello I can't download the firmware for my SDS: THNSNJ128G8NUMy laptop is a msi Ge72.Can you help me. Thank you

  • NB200 - allocated for the 128 MB video card only

    Hello!in the specifications, we can allocate 224 MB of memory for the video card, but in windows, we can assign only 128 MB. Someone at - it a solution?

  • Skype for Symbian: cannot copy the text!

    Hi, I use Skype for my Nokia E52 and I can select text on the IM window by holding the SHIFT key with the help of the arrow buttons (navi). The problem is that I couldn't find a combination of path/button to copy the selected text in the Clipboard.Ho

  • BIOS for windows 8 on a1477c

    Hi I am trying to install windows 8 on a hp pavilion A1477c pc and after restarting the computer to continue with the installation to complete the computer gets stuck in the Windows logo with a status inducator go round. Can someone help me solve thi

  • Papers for warranty

    I received zero because the historic device to factory settings. but certainly not such a story be sure to zero the device. I have defrauded. I send the applicant's documents and papers in my hand