OfficeJet Pro L7590 AIO - using ADF for scanning Photos stack

I've seen other posts along this line, but they have not answered my question.  I want to put a stack of photos in the ADF Document (CAD) and have them automatically scanned in separate JPG files.  I have not been able to get this working. Actually, I can't get the scan function to accept any document in the ADF.  I loaded an image in the ADF and click the scan button on the L7590 only whether scan the empty dish without pulling the photo.  I got the same result when I used the HP Solution Center software.   Seems like the L7590 should be able to do this... I just can't figure how to make it work.  I really don't want to load the dish with one or several photos at once.  One of the main reasons I bought the L7590 was to replace an old scanner with flat SCSI HP autonomous because she didn't have a document feeder.

PS - I know that the ADF works because I made copies of a document multi-page placed in the ADF.

Thanks in advance for any help you can offer!

Hey DexterM,

I solved my problem!  I think it was a pork/configuration installation/CPU issue.   I thought that my call to the HP support line a few days he's solved a unrecoverable Setup error (Error 1335 if you are interested), but given the other problems I saw, I decided to remove all the programs and re-install.  After copying the installer on my drive hard vs installation from the CD, I was able to go beyond the fatal mistake and seemed to all software installs successfully.

Then, after you fix pork CPU issue the HP solution Center Software ran quickly and I was able to set the parameters of configuration of scanner for the first time.

This allowed me to enter the help of scanner manual (the manual supplied with the scanner is very rudimentary) and I was able to get the correct configurations.  I then tested with 3 photos in the ADF and it worked - put each photo in its own file.  Woo Hoo!

Thanks for your help and I hope that this thread will help others - IT IS POSSIBLE to SCAN MULTIPLE PHOTOS INTO SEPARATE FILES VIA THE ADF!

Topcorner

Tags: HP Printers

Similar Questions

  • OfficeJet Pro L7590 can print but not scan

    My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

    • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
    • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
    • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
    • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
    • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
    • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
    • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

    I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

    It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

    I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

    Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

    Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

  • HP Officejet Pro L7590 - cannot scan - the installation program does not scan Betacam

    I have a HP Officejet Pro L7590 all-in-one connected to my iMac OS X Lion 10.7.4 running, and I can't Scan functionality.

    When I set up the device, it does not recognize that there analysis ability, if I try to scan from the Preferences/Print & Scan window there is no option to do so.

    Also, the HP utility displays no information on digitization.

    When I try to run Scan Manager device HP HP Scan Pro application opens then immediately crashes.

    I tried to reinstall the HP software, but it makes no difference.

    Scanning has worked in the past with the same printer, but not since I installed Lion.

    Suggestions welcome! Thank you very much

    Hello

    The application of HP Scan Pro for Mac OS X 10.4 and 10.5, so it seems you are using older software which are not provided for Lion.

    Please remove completely any HP software installed using the scrubber tool:

    * Please note that the following steps will delete all HP software installed.

    1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
    2. Select Applications
    3 select the Hewlett-Packard folder
    4. double-click on uninstall HP application
    5 follow the uninstall to prompt to select a device to uninstall
    6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
    7 approve any prompt to uninstall all HP software.

    To avoid any problems due to the use of the software, be sure to repair disk permissions before you reconfigure the printer:

    1. open the Applications folder.
    2. go to the Utilities folder.
    3. double-click on disk utility.
    4 Select the hard disk that contains the boot volume.
    5. go to the first aid tab and select Repair disk permissions.
    Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

    Go into System Preferences > print & Scan

    Click on the sign more and select your printer.

    The latest version of the software for your operating system will be downloaded automatically.

    If the software download fails for any reason, download and install the latest drivers 2.9 HP printer:

    http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers.dmg

    Now add the printer by following the steps above.

    Below you can find what scan methods can be used with Lion OS x:

    http://support.HP.com/us-en/document/c01910186

    Kind regards

    Shlomi

  • OfficeJet Pro L7680 AIO: OfficeJet Pro L7680 AIO DRIVER will be available for Windows 10?

    (NOTE: you don't list Windows 10 64-bit under the above operating systems.)

    I have an OfficeJet Pro L7680 AIO running Windows 7.  It has been a wonderful printer.  (I started to work on printers in 1966, so I have some experience with them).  Its quality and reliability have been superb.

    When I "upgraded" to win 8, I found that no driver was, so I bought a new HP AIO, but its controls were so poor and hard to see that I returned it immediately.   Then I returned to Windows 7, a good solid o/s.

    Now, I'm thinking 'redevelopment' of Windows 10.  I had assumed that no driver for my L7680 would be available, but I read somewhere that one became available for Windows 8.1 (?)

    My question is: a driver Windows 10 will be available for my excellent L7680 AIO?   Or do I have to stay on Windows 7 to use it?

    Windows 10 is not quite finished yet, is not clear what will be included.  (Last week there were three versions of the builds on the fast ring.)  The last public version includes a printer HP Officejet Pro L7600 Series driver.

    Page www.hp.com/go/windows10upgrade no details, but said toward the end of July for more information on what will be officially supported in Windows 10.

  • HP OfficeJet Pro L7590 want to use wireless

    I have a HP OfficeJet Pro L7590 (all-in-one) want to use wireless.

    I have a laptop Apple Macbook (mine) and a laptop IBM thinkpad (from my company that I keep with me).

    How can I use the wireless all-in-one with two laptops - what equipment do I need and where can I find it?

    Thank you

    Judy Uridge

    You must have the wireless router if you want both a wireless connection. The printer has no built-in wireless so you need to connect to the router wireless using a LAN cable. And before you can do this, you must set up your own network first. You must call your router or your ISP factory to set up your own network of wireless configuration.

    For more information on the configuration of the printer on the network, you can find this useful link.

    http://support.HP.com/us-en/document/c00750079

  • I have hp officejet pro L7590. the scan is blocked

    Hi, my printer is HP officejet Pro L7590 and scan it is stuck, how do I clear that? Thank you

    This page may have the info you need: http://support.hp.com/us-en/document/c02013892

  • Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

    Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

    I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

    I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

    The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

    I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

    Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

  • HP Officejet Pro L7590 printer automatic feeder no longer works

    HP Officejet Pro L7590 (model: CB822A)

    Mac OS X 10.10 Yosemite

    My automatic document feeder has stopped working about a month or two ago. If I put a bunch of papers under the top there is no beep/light to recognize. So I can't copy a bunch of papers at the same time.

    Is there a recommended HP repair Centre/store in my area that can fix? I'm in Bethesda, MD 20817.

    Thank you

    Hi @rustyblue

    Although HP has not one allows the repair facility that I can refer you to, I found 2 useful documents which would allow you to fix the problem yourself;

    If the problem persists, you can take the printer to a dad and pop shop local, or perhaps call HP HP. could offer you a discount on a newer model.

    If you are in the Canada or you can call 800-474-6836 Contact HP worldwide.

    I hope this helps.

  • HP Officejet Pro L7590 problems with new software

    Hello

    I have a HP all-in-one OfficeJet Pro L7590.  I had to move the printer on another computer that is running Windows 7.

    When I install and try to print to the printer does not act as he did with the software that was on the old computer XP.

    What I mean is that the printer will not print double side which is a feature that I used a lot.

    I downloaded and reinstalled the software and downloaded used the HP print and Scan doctor.  When executing this I was told there was a driver conflict so I unplugged the usb cable and drivers have been removed and when I plugged it in new dirivers were installed.

    Always when I go to properties and select Quick economy and printing on two sides he spits a page then the printer acts as if it was out of paper, and then when I press OK on the printer it prints the second page on another sheet of paper.  Note: What is printed on the 1st page prints correctly and what is printed on the 2nd page works properly for printing on the other side, but it is not the other side, but a separate sheet of paper.

    Your help would be MOST APPRECIATED what!

    Note: I repeat that the software that worked under Windows XP has never had this problem.  This new version of the software running under Windows 7 has a problem.

    Hello

    Just to thank everyone who responded to my questions about the problem with printing 2 Facer on OfficeJet Pro L7590 by HP.  I did the following and it seems to have solved the problem of this printer DO NOT print on two sides of a sheet of paper.

    1 deleted all the computer printer software

    2 used the utility available on HP website washer to clean any persistent software that I couldn't find.

    3. set the printer back to factory defaults.

    4 use HP printer Installation Wizard to find and install the fix version of the software that sits on the HP website.

    Thanks again for those who repsonded and I hope the above helps anyone who might read this message.

  • OfficeJet Pro L7590: Impossible to uninstall/install drivers

    I read the other posts on this problem without success.  When I try to uninstall the software from my computer hp not using the 'L4 Uninstall_", it hangs to 10/12 every time.  I tried to uninstall it in safe mode, nothing works.  When I tried to reinstall, it would fail with no error message.  I went in the observer of events, and here is the result:

    The failing application name: hpzscr40.exe, version: 14.0.304.0, time stamp: 0x500689b6
    Name of the failed module: KERNELBASE.dll, version: 10.0.10240.16384, time stamp: 0x559f38c3
    Exception code: 0xc00000fd
    Offset: 0x00000000000238fe
    ID of the process failed: 0 x 440
    Start time of application vulnerabilities: 0x01d11d462ec05174
    The failing application path: C:\Users\Username\AppData\Local\Temp\7zS434C\setup\hpzscr40.exe
    Path of the failing module: C:\WINDOWS\system32\KERNELBASE.dll
    Report ID: d1ae1651-131c-4d83-af6d-8e20d6369653
    Faulting full name of the package:
    ID of the failed package-parent application:

    I was finally able to install the software after using my revo uninstaller pro, and go to all the places I could think of, where would be the hp software and following the "resolved" here positions.

    Hi @helpme9,

    Welcome to the Forums of HP Support!

    I see that your experiecing problems get the HP software for your HP Officejet Pro L7590 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand that you must be frustrated at this point, sometimes, older versions of the HP software can be tricky to remove and reinstall.

    Generally, we use the Uninstaller.exe L3, which is the built-in cleaning brush.

    Have you received the error message "the system cannot find the specified file" (hpzprl40.exe)? This error can be difficult to solve.

    Please follow these steps in the order presented.

    Clear the temporary files:

    1. Click on the Start menu
    2. In the box "search programs and files" located just above to start after you click on it, type%temp% , and then press enter on your keyboard
    3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
    4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
    5. Close the Temp folder when it is empty
    6. Right-click the recycling bin on your desktop and select empty recycling bin.
    • Download the drivers here. do not run the Setup program.

    Does a L3 uninstall:

    • If you use a USB cable between the printer and the computer connection, please unplug the cable now.

    1. click on the Start menu

    2. in the box "search programs and files" type folder and press enter on your keyboard

    3. when the Temp folder opens, find the file 7z. It comes to your HP Installer package.

    4. click on the 7z folder to open it. He will not have the same folder name 7z like the one shown in the picture below, but will be similar.

     

     

    5. when the folder install 7z opens, click the UTIL folder to open it.

     

     

    6. click on the CCC folder to open it.

     

     

     

    7. Finally, scroll down and find the Uninstall_L3 file. Double left click on the file Uninstall_L3 to launch uninstaller of level 3 Please follow the prompts on the screen to complete the uninstallation. Restart your computer if prompted.

     

    Once level 3 Uninstall has completed successfully, please proceed to the next step.

     

    Run CCLeaner: 

    Then, I'll have to run a CCLeaner to make sure that no malicious files not present on your computer that may interfere with the installation. Can I have it please click here to access the CCLeaner. Once the site opens, select the free download button at the top. Once the download is complete please perform the Scan. It would take several malicious files find you might need to run the free Scan a few times to eliminate all that. Once completed the CCLeaner, please proceed to the next step.

    • Restart the computer.
    • Download the drivers again and install. 

    If the problem persists, please try to unlock the hidden administrator account.

    Unlock the system hidden administrator account:

    1. Type your menu keys Windows or start and in the box "search programs and files", type CMD
    2. CMD will fill as a search above, option just right click on it and "run as administrator"
    3. Once opens in CMD (command prompt), type net user administrator / Active: Yes and press entry
      on your keyboard
    4. Next, close CMD, then restart your computer
    5. When your computer is on the newspaper in the new account which should show. It will be called administrator , and you have a password on it.
    6. If your computer automatically connects to your account after reboot to go into yourStart menu, click the arrow next to 'shutdown' and choose 'switch user'. Now log in the administrator account.
    7. Under the administrator account, please click here to download the package full feature software and driver of your printer.
    8. Once the download is complete, follow the instructions on the screen to install your printer
    9. Once the installation is complete, please open the software of HP Solution Center to confirm now it, the scan software opens and works correctly
    10. If software HP Solution Center now works very well, please log out of the account administrator and return to your normal user account.
    11. Under your user account, the full-function software package and the printer driver must show completely installed. Please click on the HP Solution Center icon to confirm if it always opens correctly. If HP Solution Center opens very well please run a test scan to confirm functionality.

     

    If the HP Solution Center software works very well, you need to hide the administrator account.

     

    Hide the system administrator account:

    1. Go to your Start menu or press the Windows key and under the box "search programs and files", type CMD
    2. CMD will fill as a search above, option just right click on it and "run as administrator"
    3. CMD (command prompt) opens, type net user administrator / active: No. and press enter
    4. Next, close CMD, then restart your computer

    When your computer turns on it please test the software HP Solution Center again to confirm that everything works again according to normal.

    Posted by my colleaque X-23.

    References: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Solutions-Center-will-not-open/td-p/5117... and http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-ENVY-5640-new-does-not-work-Install...

    In addition, here is another document explains how to fix this error message: how to solve the problem of ""the system cannot find the specified file "."

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • HP Officejet Pro L7590 and printing software Mac Yosemite 10.10

    I installed my Mac to a mew 2014 MacBook Pro with the retina and Yosemite 10.10.1.

    I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (the lights are on). What software download to install the printer? Is it not available for Yosemite yet? Where is it located? I guess that its not available to Yosemite yet? I don't have the original software. Thank you.

    Hi @rustyblue,

    Welcome to the HP Forums!

    Currently, it there is no full software features and drivers directly through HP for Mac OS X 10.10 for this printer model. However, after some research, I found this driver directly by Apple. HP v3.0 for OS X printer drivers.

    If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and another printer, these steps will work on 10.10 as well for your printer.

    I hope that helps you get up and running, please let me know if you have any additional questions!

  • OfficeJet Pro L7590 cannot find the printer in the basic facilities and full.

    The HP solution center software has stopped working recently with my Officejet Pro L7590. The printer is connected to a wired network.  I uninstalled the software, downloaded the latest software to install driver from HP.com.  The operating system is XP. I tried to install the base and full versions of the software several times, do a full uninstall/scrub every time.  No package can find the printer.  I ran the residential network Diagnostic tool and it can find the IP address of the printer very well.  I can access the web page to printer very well.  I've successfully installed the drivers of the company and I am now able to print.  I then tried to reinstall the full version, and it would still not find the printer.  Another pc on the network is the center of Solution HP software installed and communicates very well with the printer. I tried to disable firewall Eset Nod 32 during the install and no change.  I deleted all the entries in the registry I can find for HP, but still can not get the full version of the installation of the driver to see the printer.

    What else can I try to succesfully reinstall the driver package?

    Sorry, you gave the wrong way...

    First of all if you still have Enterprise installed download and important work!

    1. uninstall all other instances of 8.3 or previous.  My recommendation would be to uninstall all software printer hp through Windows Add/Remove Programs if nothing else to start with a base line.

    2. download the Utlities "HP Software Removal Utility - IT professional use only" (don't worry, this stand-a-alone also works on computers). File name: OLProL7X00_Scrubber_8.exe

    3. Once you unpack the latter you will have a new window and down there are 5 files, you must run one at a time in this order.  Uninstall.bat, Unistall_L1.bat, Unistall_L2.bat, Unistall_L3.bat, Unistall_L4.  Make sure that each of them is complete before you begin the following.  Some of them open and close Windows Installer UN and there is a gap of about 10-15 seconds.  Some of them require you to press any key to close the window on the finish.

    4 REBOOT

    5 download if you don't have not already ch from the Solution of Driver - company it, basic features of HP software/driver-IT Professional use only (again it is ok, you want your scanner, printer, monitor, and HP Solutions software to work once again don't you?).

    6 install the filename Business Solution: OJProL7X00_enu_Enterprise_7.exe if you uninstalled all this will install without a hitch, but you may need to input manually by selecting the IP method, enter the IP address of the printer. It's where he then found my network printer, and he continued the installation.  Mine found via the method of IP but not automatic.  Finish the installation and give your computer a few minutes to finish in the bottom.

    7 reset.

    8. If you have a program that uses a scanner TWAIN as Adobe Professional, CorelDraw, etc. test your scanner.  Mine works now.  Leave the test program,

    9 download new version 8.3 software, the full version of all the 311meg of it!

    10. install this software 8.3.  You can get an error (I did) just do not send the report, but the key is the continuous software to install.  What the problem is that the software company alreadly installed a files "hp? 5. ?? "and the cant on write.  The amount of the fine. Now when you get to the point where he asks how you connect your printer, USB or wired/wireless select Wired and click OK.  This will bring you to a new screen that is simular to the last, but to the bottom is a checkbox with "continue with the installation, I'll add the material later.  Put a check mark in the box and click Next.

    Surprise! the Setup will continue installing all recommended software and complete.  Still finished once that there is still things going on in the background! then give him a few minutes to complete!

    11 restart and give a little time and you will see that the screen is the network printer and all software programs now work.

    12. the only thing I don't understand is this: the old software used to create printer drivers 2, one for the printing of paper and other fax directly in applications.  The fax printer driver is no installation/configuration in this method, but I think that the Technical Support HP can guide you through this set up if necessary.  I'll do that tomorrow as it was something that I never thought or missed until it didn't work!

    I hope this helps! It did for me!

    Joe

  • OfficeJet Pro L7590 fails to install as a network under Windows 7 64-bit device

    I install the full feature software and driver for my Officejet Pro L7590.  I am running Windows 7 64 bit.  The printer is connected by ethernet through my network.  When I get to the step to add the printer as a device, I select it's a wire to it with an Ethernet network connection.  It is my printer and it's thanks to a wired connection.  He then began running diagnostics that appear successful.  It starts to install and is about 50% and fails with no explanation.  My choices are again (which produces the same result) or continuous (just out).

    I rebooted several times, turned the printer off and then under tension, but nothing seems to help.

    I can navigate to the administration page web printer and it seems fine.  I also have other computers on my network that do not have a problem, but they only use the base, not the full features software print driver.

    Have solved it with the HP chat service.  Try to add the device from the shortcut that was installed from the first unknown failure has not worked.  Had to use the full software download and add the device from there.  He acknowledged some conflict that he was able to fix.

  • OfficeJet Pro L7590 is a horizontal line of 1/2 "wide black

    My Officejet Pro L7590 all-in-One and running on XP started putting a 1/2 "wide black horizontal line at the top of the page during the analysis, all the patches?  It was intermittent, but now this on every scan, and I tried cleaning and realign the heads but no change.

    Couple of things to check here:

    First of all, you also have the black line if you print from the computer? I'm guessing not, but he should ask.

    Second, try this:

    Put a blank sheet of paper on the flat. Leave the lid open. Start a copy while watching the scanning light to move. It's moving at all with the lights off? It's strangely moving near each end?

  • HP Officejet Pro L7590 all-in-one printer (prints half of the pages &amp; gibberish)

    My HP Officejet Pro L7590 1.5 year, all-in-one has decided he wants to print a half pages & then gibberish or page 1 of a document of several pages & then turn the remaining blanks pages or gibberish.  It started about 3 weeks after a Windows Update (I do not push this update because this may just be a coincidence).  I rolled power computer & printer. I also made sure to have the most current printer driver.  I have uninstalled & reinstalled the unit 3 times now.  I checked the settings of the queue as well.  Initially, the problem seems to happen when I rolled up a job to the printer and then closed the application or document that I wanted to print by going to work on something else (like I always did).  Now, it happens whenever he wants to.  I then delete the pending print job & power cycle sometimes even the printer to act again on the right.  I'm pretty tech savvy - I do IT for our office, unless it is over my head.  What can you try me & this problem?

    If it happens again I suggest to reset the spooler via the command console and then try printing again.

    Start > run > command

    net stop Spooler
    net start Spooler

Maybe you are looking for

  • HP pavilion dm1 - test memory failed

    My Hp Pavilion dm1, hangs as soon as windows starts. I went the system diagnostics and ran the development of the system, but it failed. Here are the results: Memory test: failed Failure ID: 9C4FNJ-5NU6J9-MFH15F-404303 PRODUCT ID: LW200UA #ABA I don'

  • Why my HP Desktop Vista keep delete my C6180 printer drivers?

    My HP desktop computer continually removes my drivers PhotoSmart C6180.  I visit the Web site and reload.  Then, he continually tells me that it cannot find PhotoSmart Essentials.  It asks me to insert my disc, but it is for XP and will not work.

  • computer does not recognize sansa e260v2 when I plug

    Someone out there... Help, please!

  • Need to reset the keyboard so U do that type 4 and I = 5 O = 6 etc.

    The keys on the right side of my new laptop have a number such as a 10 key and I can't cancel it.  There is a key that says fn that will change i or O or U, but the keyboard is somehow put into permanent with numbers not letters.  HELP please.

  • C# investigation

    Hello I hope someone can help with this query. C# with XNA, widely used in the development of games or C++ with Direct X the most professional way to go? Thank you very much TJV.