OfficeJet Pro L7680 cannot NOT CHANGE of PRINTER offline online

Similar Questions

• OfficeJet pro 8630 + is not centered copy - printing and scanning ok

  Older than two months Officejet Pro 8630 (> 400 pages) - copies of plate or charger are shifted to 3/8 of an inch on a side. Printing from computers or scanning is centered.

  FDP1CN1416AR firmware version

  Using tray 2 by default. Tray 1 is used for printing the envelopes.

  Thank you

  I found that turning on/stop margin shift and turning on the margins by default button a few times eventually set the output to the centered normal copy.

  If the settings are now to original (shift off and default on) the printer now copies centered. Must have been a burp of firmware. If that happens again once I try a hard reset to clean.

  Thanks anyway.

• OfficeJet Pro L7680 does not

  Powers of the printer on but do not have orders.  Displays what appears to be a symbol of power with a code starting with a letter followed by seven numbers.  Currently, it reads B8076358.  Will Flash media slots.  If I press the power button, the unit shuts off and won't come back.  All the other buttons have no effect.  How can I correct this problem and get the printer up and run again?

  Reset your power by disconnecting from the back of the printer and the wall.  In addition, disconnect the power cord from the power supply itself.

  Wait a minute and plug everything back in and repeat the test.

• All-in-one Officejet Pro L7680 suddenly leaves impression

  My HP Officejet Pro L7680 all-in-one was printing and then abruptly stopped. In the print queue window, it says 'printer ready '. Under the heading "job info", it says "ERROR: / private/etc/cups/interfaces/HP_Officejet_Pro_L7600 failed."

  That's all. No additional inequality at all. I searched online for anyone with a similar problem and could not find anything related.

  Also, as a side note, when the printer was working before, in my Mac toolbar icon was a picture of the black printer. Now when I hit print on a paper, original icon pop up and then converted to an image of a gray printer that does not resemble the printer. Don't know why, but it seems apparent.

  To begin I suggest to remove the software and then reinsert from the link below, these are the drivers up to date and I hope this will solve your problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=2512009

  -Spencer

• HP Officejet Pro L7680 All - in - One will not print black

  Original title: HP Officejet Pro L7680 All - in - One

  I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

  Hello

  This forum is for comments on the Forums for answers and you should ask at your
  questions in the Windows Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  It also helps us to help you if all the useful information.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==============================================

  In this case you should check with HP Support, their documentation online and drivers,
  and ask questions about known issues in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• HP Officejet Pro L7680 Allin1: Software for HP all-in-One Printer

  I have a HP all-in-one Officejet Pro L7680, and every now and then it disappears from my computer Windows 7 64-bit.  It is removed from the list of printers in any program use to print something, and it has also disappeared from the list of printers and Windows devices.  The center of HP Solutions icon cannot access the computer and gives an error message saying that the printer is not completely installed.  Printing software is always on the computer, in order to reinstall the printer, I have to go through the process of uninstalling all software before installing again from scratch.  I thought I had all the printer installed updates, but there may be something I don't know. I know how to uninstall and reinstall from scratch - I will do now - but this product every two months, and I would like to avoid having to do that later.

  Help or advice you can provide would be greatly appreciated.

  Thank you very much.

  I add this addendum to the message a day after posting the original message in order to provide additional information.  Yesterday, I removed and installed from scratch print drivers.  I ended up having to do this three times.  Each time, I managed to install the complete printer very well, but when I installed updates (directly or in the past), the printer drivers "disappeared" in my list of printers and it was not accessible more programs I need to print things (processor or browsers).  After the disappearance, I deleted programs and reinstalled.  In the end, I chose to not not to install updates because that has caused the printer to disappear.  I was able to print.  However, today when I booted up my computer, the printer was 'gone' again.  I deleted the drivers (using windows 7 uninstall a program function) and I reinstall drivers again, but given the speed at which the printer is missing, I'm not optimistic that this will work for a long time.  I don't know all major changes I made to my computer recently that could possibly cause the disappearance of the printer suddenly occur so frequently.  I get Windows updates each week.  Hmm.    Another note - after installing the drivers yesterday so I could print, I created a "restore point" on my computer.  Today, when the printer was "gone", I tried to restore to the restore point, but the restore process has failed.  That's why I have to reinstall the drivers again today.

  Thanks for any help you can provide.

  Thanks for letting me know.

  Let's start with the instructions I posted, but change a few steps: please do not follow the steps in RED

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > OJProL7X00_Full_14.exe
  4. Download and install the Microsoft Visual C++ Runtime Error fix
  5. After step 3 and extracted downloads software, open the temp folder, use the instructions in step 1.
  6. Locate and open the folder starting with 7z (example: 7zS2356)
  7. Open the Util folder
  8. The CCC folder
  9. If you have a computer HP run the L3uninstall.exe. If you have a computer no HP run the L4uninstall.exe

  Instead of the procedure described in the reading, please uninstall the software by following the steps in this link: uninstall the printer software Instructions

  Now, you can return to pick them up to step 10 and complete all the steps of the procedure.

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• My HP Officejet Pro 8600 cannot print from my MacBook Air

  Hello

  My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

  Hello boojoo1tw,

  Welcome to the HP Forums!

  I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

  If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

  Please post your results, I'll be looking forward to hear from you.

• HP Officejet Pro 8625: HP Officejet Pro 8625 impossible to change the order of printing back to the front and want to change

  HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change

  The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625.  You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here.  When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later."  After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done.  Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK.  The Page order option will be available in the Advanced Printer Options tab.

  

  

• OfficeJet Pro L7680 print from Windows ME

  I have a few PCs in a network running on Windows ME, and I would get very BASIC printing, connect to a HP Officejet Pro L7680 all-in-One color in the same network. I don't have scanning or fax, only very basic print options. Suggestions how to recover a basic driver?

  Thanks in advance

  Paolo

  All you have to do is to add a TCP/IP printer to the printers IP address port and install the HP Deskjet 990c printer driver included with ME (?). which should help you to print.

• New OfficeJet Pro 8620 does not print PDF files

  I have a brand new 8620 and I use Windows 7. My printer prints a few PDFs but not most other PDF documents. I am using Acrobat Reader XI. The printer will print from MS Office.

  HELP, please!

  Hello! Welcome to the @lmel forums

  I have a few ideas that come to mind, I read the issue you're having with printing of PDF files. They are here!

  1. try to resave the PDF files that do not print and then try printing again.

  2. update of Adobe:

  Select help - search for updates. If a new update is available, it installs automatically.
  Once installed, you can restart a computer.
  Then try to print the PDF file.
  
  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  3. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  4. uninstalling the printer software

  Restart the PC

  Reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  That should do the trick! Keep me abreast of the results!

  Have a great Wednesday

• OfficeJet Pro 8620: can not scan from my printer on my computer

  Hello. My computer recently downloaded windows 10 and since then I can not scan from my printer to my computer (although I can scan my computer on my printer).  I get the following error message (and hp scan doctor found no problems): "the analysis could not be performed because of one or more of the following problems: - computer connection is lost, the application of scanning the computer is currently in use, OCR application - is not installed on the computer.

  Is there a way to fix this?

  Thank you!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer

  Once you have installed the software,

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)
  

  

  Hope that helps.

• My HP Officejet Pro Wireless is not printing black even with a new cartridge.

  My HP Officejet Pro Wireless is not printing black even with a new cartridge.  Help!

  Hello

  Of course check that the cartridge is very savvy.

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you