OfficeJet Pro L7680 print from Windows ME

Similar Questions

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• HP Officejet 5740: Cannot print from Windows 10

  Since the upgrade to Win10 I can no longer connect and print from my Officejet 5740. Other machines / devices in the House (not Win10) can print very well. The printer always showed "offline". I tried to remove and re-add them, but it doesn't give me the 'DIRECT' option - I can get into my router wireless WPS PIN (by the other responses on this forum), but it says it cannot connect.

  Any other suggestions?

  Thank you

  Hello

  Nothing wrong with your printer, please DO NOT touch to him. To repair your computer, please download the software package and the following driver and install on your machine Windows 10:

  http://ftp.HP.com/pub/softlib/software12/COL55955/MP-134701-2/OJ5740_117.exe

  Kind regards.

• HP Officejet Pro 8620: printing from iPhone 6

  I just installed an update to my i-phone 6 - ios 10.0.2 and can no longer print.  First of all, I received a message that the printer is paused.  Now, I get a message that the printer is busy.  I can print from my laptop.  I closed my printer, reset it but without success.

  Hello
  
  Sorry to hear that you are experiencing printing problems.
  
  Try to restart your apple device - it's a simple solution that sometimes allows to restore the connection to the printer.

• OfficeJet Pro 8610: Printing from the surface of the glass

  When I use the scanner glass to print a 8-1/2 x 11 page, I get an impression that indicates the size of the entire glass.  In other words, I get the height 11 "(slightly reduced) and a 1/2" space at the top (or bottom).  How do I change the setting so I print only the original and not glass?

  Hello

  Your printer cannot print from glass. Are you talking about copying (similar to the copiers)? If so, please try the printer control panel:

  b press copy,

  (b) press settings (Gear icon in the lower left),

  (c) based on the size of the paper.

  (d) select the size of the list,

  (e) return (closed arrow) key,

  (f) touch black or color.

  Kind regards.

• HP Officejet Pro 8600: Printing from tray 2 Hp8600

  I recently bought a 3 microsoft surface, and for some reason when I go to print I can no longer select tray 2, happens with tray 1. I have tried a number of things, looked at preferences and even followed the steps in this post http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/Easy-selection-printing-to-tray-1-or-2/td-... all the way to step 33, but the paper/quality tab is not either.

  Can anyone help?

  Hi danjambal,

  Thank you for your answer!

  The steps for Windows 8 will run on Windows 10. Please, try the following:

  1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

  2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

  3. In the Printing Preferences menu, select paper/quality.

  4. In the paper Source drop-down list, select tray 2.

  5. In the paper size drop-down list, select the size of paper suitable for the print job.

  6. Click or click on apply, and then click or tap on OK.

     NOTE:

     Follow these same steps for the default print tray back to Tray 1.

  If these steps do not work, there could be a nuisance pilot. Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• OfficeJet Pro 8630: printing from different trays for different projects

  I have the paper same format in all stores, but a plateau is white paper and a tray is yellow.  I need to know how to change trays depends on what I print.  I checked the print queue, but have not seen any choice for what bin pull.  Any help would be appreciated.

  For this model, you will need to remove paper from the main tray and load the label paper before printing.

  If you have any other questions please let me know.

• OfficeJet Pro L7680 AIO: OfficeJet Pro L7680 AIO DRIVER will be available for Windows 10?

  (NOTE: you don't list Windows 10 64-bit under the above operating systems.)

  I have an OfficeJet Pro L7680 AIO running Windows 7.  It has been a wonderful printer.  (I started to work on printers in 1966, so I have some experience with them).  Its quality and reliability have been superb.

  When I "upgraded" to win 8, I found that no driver was, so I bought a new HP AIO, but its controls were so poor and hard to see that I returned it immediately.   Then I returned to Windows 7, a good solid o/s.

  Now, I'm thinking 'redevelopment' of Windows 10.  I had assumed that no driver for my L7680 would be available, but I read somewhere that one became available for Windows 8.1 (?)

  My question is: a driver Windows 10 will be available for my excellent L7680 AIO?   Or do I have to stay on Windows 7 to use it?

  Windows 10 is not quite finished yet, is not clear what will be included.  (Last week there were three versions of the builds on the fast ring.)  The last public version includes a printer HP Officejet Pro L7600 Series driver.

  Page www.hp.com/go/windows10upgrade no details, but said toward the end of July for more information on what will be officially supported in Windows 10.

• OfficeJet Pro 8100e Printer Wizard not available

  Hello

  Have installed new Officejet Pro 8100e printer under Windows 7, 64 bit professional and it prints well, but, when I double click on the printer icon in the "Devices and printers" to bring up the window that has the HP printer Assistant inside...

  The printer HP Assistant does not at all.

  I have therefore no access to printer management tools.

  I was wondering about the software on the installation CD, so I uninstalled and reinstalled via download from the website support - same result.

  Someone else had this problem?

  Anyone who has a solution?

  Grateful for any help...

  Hello

  What happens when you click on start < programs=""> HP, select the folder for your printer, then the HP software? (Listed under the printer model)

  Any specific answer?

  If the software does not work, try to run this fix and check any changes:

  http://support.HP.com/us-en/document/c03640384

  Note: Although the details of the list of the different behaviors I belive it can also help for the problem described

• HP Officejet Pro L7680 Allin1: Software for HP all-in-One Printer

  I have a HP all-in-one Officejet Pro L7680, and every now and then it disappears from my computer Windows 7 64-bit.  It is removed from the list of printers in any program use to print something, and it has also disappeared from the list of printers and Windows devices.  The center of HP Solutions icon cannot access the computer and gives an error message saying that the printer is not completely installed.  Printing software is always on the computer, in order to reinstall the printer, I have to go through the process of uninstalling all software before installing again from scratch.  I thought I had all the printer installed updates, but there may be something I don't know. I know how to uninstall and reinstall from scratch - I will do now - but this product every two months, and I would like to avoid having to do that later.

  Help or advice you can provide would be greatly appreciated.

  Thank you very much.

  I add this addendum to the message a day after posting the original message in order to provide additional information.  Yesterday, I removed and installed from scratch print drivers.  I ended up having to do this three times.  Each time, I managed to install the complete printer very well, but when I installed updates (directly or in the past), the printer drivers "disappeared" in my list of printers and it was not accessible more programs I need to print things (processor or browsers).  After the disappearance, I deleted programs and reinstalled.  In the end, I chose to not not to install updates because that has caused the printer to disappear.  I was able to print.  However, today when I booted up my computer, the printer was 'gone' again.  I deleted the drivers (using windows 7 uninstall a program function) and I reinstall drivers again, but given the speed at which the printer is missing, I'm not optimistic that this will work for a long time.  I don't know all major changes I made to my computer recently that could possibly cause the disappearance of the printer suddenly occur so frequently.  I get Windows updates each week.  Hmm.    Another note - after installing the drivers yesterday so I could print, I created a "restore point" on my computer.  Today, when the printer was "gone", I tried to restore to the restore point, but the restore process has failed.  That's why I have to reinstall the drivers again today.

  Thanks for any help you can provide.

  Thanks for letting me know.

  Let's start with the instructions I posted, but change a few steps: please do not follow the steps in RED

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > OJProL7X00_Full_14.exe
  4. Download and install the Microsoft Visual C++ Runtime Error fix
  5. After step 3 and extracted downloads software, open the temp folder, use the instructions in step 1.
  6. Locate and open the folder starting with 7z (example: 7zS2356)
  7. Open the Util folder
  8. The CCC folder
  9. If you have a computer HP run the L3uninstall.exe. If you have a computer no HP run the L4uninstall.exe

  Instead of the procedure described in the reading, please uninstall the software by following the steps in this link: uninstall the printer software Instructions

  Now, you can return to pick them up to step 10 and complete all the steps of the procedure.

• HP Officejet Pro L7680 All - in - One will not print black

  Original title: HP Officejet Pro L7680 All - in - One

  I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

  Hello

  This forum is for comments on the Forums for answers and you should ask at your
  questions in the Windows Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  It also helps us to help you if all the useful information.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==============================================

  In this case you should check with HP Support, their documentation online and drivers,
  and ask questions about known issues in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• All-in-one Officejet Pro L7680 suddenly leaves impression

  My HP Officejet Pro L7680 all-in-one was printing and then abruptly stopped. In the print queue window, it says 'printer ready '. Under the heading "job info", it says "ERROR: / private/etc/cups/interfaces/HP_Officejet_Pro_L7600 failed."

  That's all. No additional inequality at all. I searched online for anyone with a similar problem and could not find anything related.

  Also, as a side note, when the printer was working before, in my Mac toolbar icon was a picture of the black printer. Now when I hit print on a paper, original icon pop up and then converted to an image of a gray printer that does not resemble the printer. Don't know why, but it seems apparent.

  To begin I suggest to remove the software and then reinsert from the link below, these are the drivers up to date and I hope this will solve your problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=2512009

  -Spencer

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.