OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

Similar Questions

• The left button, scroll, zoom 5 x does not at all for the optical mouse for laptop Microsoft 4000 wireless

  Original title: laptop microsoft 4000 wireless optical mouse (1000 dpi) responding left button, scrolling, 5 x zoom works quite... tried to change the batteries, installed the app again and again and all, but do not get any results.

  the left button, scroll, zoom 5 x works at all... tried to change the batteries, installed the app again and again and all, but do not get any results.

  I noticed that if I press those buttons problematic that the laser is not blink / works as like other work button done.

  (tried mousinfo in program files, on the left the button does not)

  I thought to open for cleaning before I found you I can send help or advice...

  What should I do?

  far I could found the exit of microsoft or repair center

  I liked the 5 X zoom option which miss me most...

  Microsoft wireless notebook optical Mouse-mouse 4000 (1000 dpi)

  very appreciated

  Hello Rabbi,

  1. you remember to make changes to the computer before this problem?

  2 have you tried the mouse on another computer?

  Method 1:

  Alternatively, you can try to uninstall and reinstall the mouse and check if that helps:

  a. Click Start, point to settings and then click Control Panel.

  b. double-click system click on hardware and then click Device Manager.

  c. click on the PLUS SIGN to expand unit

  d. double-click on the mouse driver.

  e. tab driver, click on uninstall

  f. restart the computer and check

  See the following article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Method 2:

  If the problem persists, test the mouse on another computer in a different environment. If you can replicate the problem in a different environment, you have a defective unit. If this is the case, see the section "More information" for more information on how to contact Microsoft Supplemental Parts for a replacement unit.

  See the following article:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP c309a complete commissioning. It turns on and the window says if please wait but does not start

  My HP c309a recently started giving me starting problems. We moved and I had to set up my office at home again. I thought that all I had to do was just plug everything back into the wall and use it, but now whenever I turn on the printer, I get a message on his window please wait while it starts, but nothing happens after that. I can leave it on for hours at a time to start completely, but it won't work. My control panel shows the printer installed and that it appears on my wireless network, but if I try to print something it says the printer is offline. The printer just freezes at startup and it reset by disconnecting the power source does nothing. I even tried to delete and reinstall it with the usb cable but that did not work or the other. Can someone help me?

  OK, let's reset the printer: turn the power off, press and hold # and 6 keys on the printer all in a little after I turn it back on.

• I just purchased Lightroom 6 and tried to install.  The program says "OS system req disappointed, does not support Windows Vista", but my operating system is Windows 7

  I was wondering if anyone else has this problem?  Any suggestions on what to try if your computer system tells you Windows 7 with Service Pack 1 , but the program disk Adobe Lightroom 6 says you have Windows Vista ?

  Copy disk files to a desktop directory.

  install from this directory.

  If you see this error again, right-click on the configuration file, and then click Properties > compatibility and the compatibility mode for win 7.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• Receive the following error: Windows found driver software for your device, but encountered an error so as to install it.

  The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)

  Hi Mohan kumar,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:

   

  Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.

  http://support.Microsoft.com/kb/940267

   

  Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Let us know if that helps.

• HP OfficeJet Pro X451dw: Drivers not install via Windows Update - error: 0 x 80070490

  Hello

  I have problems with having the installed printer drivers on windows 10 PCs, I get the error: 0 x 80070490. The State of the printer is connected to a group of networked computers. The printer name is HP OfficeJet Pro X451dw.

  I tried to use the "sfc/scannow" command and it detects that there is no error with the PC.

  However, is there a way to fix this driver update failure?

  A lot of help will be appreciated and I will try my best to solve these problems, just to make everyone happy.

  Thank you very much

  Ben

  It helped me: https://support.microsoft.com/en-us/kb/3073930?utm_source=twitter#bookmark-1607

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• Im trying to load the update of Mac OS x Server combined software and it says that my disk volume does not meet the requirements of the software

  Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?

  You are running a Mac OS X Server software? If so, which version?

• HP Officejet Pro X451dw: error OXC8191004

  I have been using HP Officejet Pro X451dw with HP laptop running Windows 7 Professional without problems. Today, the OXC8191004 error appeared. After many re - start, I still can not no response from the printer or the keyboard. What is the problem? Does anyone have experience with this or advice on how to fix? Thank you!

  Figured it out why it happened, but turning printer on & off did not help. UNPLUG, did the trick. He is now back to normal. Thanks anyway.

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open.

  Hello

  OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open. How to fix Ica?

  Operating system is windows 7 but I do not connect to the PC again

  Please Help me ASAP

  Concerning

  Check the document I linked below. Let me know if it worked or not.

  http://support.HP.com/us-en/document/c01626835

• I got creative cloud, InDesign now says the trial has expired and I have to buy the program. It seems that it does not update I already have a plan. How can I do to?

  I got creative cloud, InDesign now says the trial has expired and I have to buy the program. It seems that it does not update I already have a plan. How can I do to?
  If I pay for a product that I can't use.

  Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.