Official charger Apple Watch gives collateral charge not supported message

Similar Questions

• 6plus iPhone will not charge unless it is turned off. Will not recognize an apple cable or other. Download accessory not supported message.

  IPhone 6 with charge is no longer at least that turned off. Tried blocks and cables apple and spare parts. Download accessory not supported message.

  iOS 9.3.1

  Could damage the material due to the use of cables not Apple, etc., which is why you see the, "accessory not supported."

  Probably need to repair > https://www.apple.com/support/iphone/contact/

• Apple Watch gives a warning sound or vibration when it is out of reach with your iPhone?

  Apple Watch gives it its warning or vibrates when it is out of reach with your iPhone? If so, how to set up? If this is not the case, why they have this important function, so we do not lose our phones?

  Hello

  Apple Watch does not currently offer them alerts audible or haptic if it is taken out of the reach of the paired iPhone Bluetooth. When devices are disconnected via Bluetooth, if the watch is also impossible to connect to a Wi - Fi network, known at that time, it will display the icon disconnected at the top of the face of the Watch:

  

  However, you can find this application useful third party:

  • Lookout - security, backup and missing device
    • "Tells you the distance between your iPhone and Apple Watch and warns you if they are about to lose the connection."
    • https://iTunes.Apple.com/us/app/lookout-security-backup-missing/id434893913?Mt=8

  If you want to suggest that Apple considers adding Bluetooth disconnection as a built-in alerts, you can do so here:

  https://www.Apple.com/feedback/watch.html

• How to change the resolution of the screen when the "input not supported" message after reboot

  I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
  the problem is,
  the "input not supported" message when I reboot the PC and does not allow me to do anything.
  He presents himself before the logon prompt.
  I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
  He returns to the State ("input not supported" and no prompt connection) after I restart the PC

  Mark,
  Thank you for your help,
  I tried in vain,
  I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

  Kind regards

  Claudio.

• Apple Watch first Gen does not start

  Hi all.

  My first gen Watch just died yesterday. I tried the advice of Jonathan UK, I read the advice from Apple. No luck. Does anyone have another idea until I bring it...?

  Thank you

  Rikard

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch for about 2 hours, making sure that you follow the instructions from here:

  • Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  • Try restarting it (by pressing the side button until you see the Apple logo).
  • If necessary, then try force it restarts again.

  If the problem persists then, I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in order to have your watch checked and, if recommended by Apple, served (if under warranty, if it qualifies, or via paid repairs):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com

  More information:

  If your Apple Watch does not load, or it lights - Apple supports

• Wake up the screen on the Crown of the Apple Watch Series 2 is not displayed

  Watch app (iPhone 7 iOs 10) not the screen showing wake on the Crown of the Apple Watch Series 2 (look at OS 3)!

  What's wrong?

  Thank you

  Hello

  If you want to organize the presentation of the application on your Apple Watch using the app shows:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > presentation of the App.

• Apple Watch unlock Mac does not

  I have a first generation of Apple Watch and a spring 2015 MacBook Pro, which I just installed Sierra. When I tried to enable to release the Mac with Apple Watch he didn't even after a number of tests, but eventually he agreed.

  Now, however, I believe that if I leave my MacBook for a few minutes and come back, it will say that the Apple Watch unlocks the Mac, the small waiting wheel goes around and around, but after maybe 8 or 9 seconds it drops just go back to the password entry screen. The net result is a considerable delay to return on the MacBook. After this happened a few times, I have disabled unlocking with the Apple Watch in the preferences.

  Any ideas why this happens? Normally, my iPhone is also nearby and the watch is associated with it - does make a difference?

  Do you have any Bluetooth device that is connected to your Mac? I had the same problems with the feature to unlock, then I noticed that the Bluetooth icon in the menu bar show he was matched (three points through the center of the symbol) even if I had nothing paired with my laptop. I open Bluetooth preferences and delete the two devices which are listed and which had been previously connected, but were not currently connected. After the removal of these items, the Bluetooth symbol returns to its normal look unpaired, and the release device started working 100%.

  I then tried to experiment a little. First of all, I have associated my Bose speakers. 100% failure, required my password every time. Then, I have not matched the speaker and paired with an Apple Magic mouse. This gave rise to a rate of 50% of failure but still worked when I clicked on cancel, then tried recording in. I have not tried any other devices or multiple as a mouse and a keyboard.

• Apple Watch Stand objective does not

  Sunday, September 17, 16, I've updated my Apple Watch (only a month) to the latest version. My goal of settlement worked very well on Saturday. It records now is no longer the time am I standing. I am a teacher and have been standing in my class since 09:00 this morning. About two hours of the judgment and it has not been saved. All the other goals in my application of activity are working perfect. Solutions or thoughts out there?

  Hello

  Try the following steps:

  • On your iPhone in the app shows, go to: Watch My > General > detection of wrist - make sure it's open.
  • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness - is Fitness Tracking off.
  • Restart both devices in two turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

  • Return to fitness tracking configuration and turn it back on.

• Apple Watch series 2 is not available in stores?

  So I've pre-ordered the Apple Watch series 2 and received a notification of shipment for delivery on Sept. 21. However, I just stumbled on the Apple Store to pick up my iPhone 7, and they had ZERO Apple watches for sale... Looks like these are available in VERY limited quantities at the Apple Store. Someone at - he hopefully pick up?

  Not me. I stopped at my local store too and spoke with an employee that said they were full, but I could check the website store at 8:00 tomorrow to see if they have received a whole night. I didn't ask details so I will try to know where to look. The Apple Online Store shows not available for pickup. I hope that this will change tomorrow. As shown in the model I want 3-5 weeks for delivery.

• Apple Watch dictated either does not or tape a word at random

  all of a sudden Apple Watch message dictation does not work.  It creates only the audio and I get a message that the dictation has failed, or slap a word at random that I do not dictate.  Emoticons go through

  HI - try the following steps:

  On your iPhone, go to: settings > General > Siri - disable, pause for a few moments, and then reactivate the Siri.

  If it does not immediately help, restart both devices also subsequently. Turn on both devices power off, and then restart your iPhone first.

  -To turn off / restart your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -When he is ready to go back, press and hold down the side button until you see the Apple logo.

• is it possible that my iPhone/Apple Watch can remember is not to forget iPad Pro?

  I am aware that it's a luxury problem,

  but it has happened twice to work,

  forget my iPad Pro,

  namely 30 minutes later

  only in tracking my actions and save meet where I left it, for example in a warehouse or office colleagues.

  The "find my iPhone" is good to look for, but I'd love to be more proactive and get a message when I am out of reach (bluetooth)!

  There is now ready to be used in the iPhone close/beacon technology 6 more, iPad Pro and Apple Watch, it seems possible to me.

  Did anyone of you savvies knows a solution?

  Hello BakkerBox,

  Thanks for this info and choosing the communities Support from Apple. I know how to keep track of your devices is important to you!

  Looks like you want to have a message pop up when you are out of reach of your iPad Pro as a reminder. I am aware of a way to do this directly on your devices iOS, but I can work around you that I personally use for a similar situation.

  Use a function callback reminders app location to make a message appear. You can use this to Setup places a reminder to "Grab my iPad Pro" when you leave a specific office of the building or location.

  Location of reminders - iPhone

  You can also ask Apple to add this feature in the future: reviews of product - Apple

  See you soon!

• Apple Watch and sound does not

  I think I resound hearing aids and using the latest app with more than IOhone 6s and Apple Watch.

  IT is located to imitate iPhone. However detect the updated iPhone software 9.3.1 I have to restart the phone and watch in order to make them work with the app to resound. I've never had to before this last update. Is anyone having this issue. Apple doesn't work with the accessibility issue well and needs to step it up.

  Apple and resound und is change for me but this must be a priority for Apple during the upgrade of software and to ensure that the watch is upgraded as well life. I have also uninstall the app to see the watch resound and reinstall every day to make it work.

  Help, please

  James

  Hi James

  Helps resolve problems with your third-party application, as a first step, it is best to contact the developer of the app:

  More information:

  http://www.resound.com/contact

  http://www.resound.com/hearing-aids/apps/control-app

  http://www.resound.com/SmartApp

• gives me "communication not available" message and the printer does not print dell v305

  My dell v305 printer worked. He started giving me this "communication not available" message and it stopped printing. I uninstalled and reinstalled the printer software and I changed the printer cable. Nothing works.

  R crumb,

  What protection antivirus and firewall do you use?

  Try these settings?

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• G50 - 80 - charger plugged not supported message

  Hey guys

  I just bought a laptop G50-80

  first time battery charge was not charged with more than 60%

  I could assume there is an option to save the battery life but how can I deactivate - activate manually if I need to capture more load on the battery of my laptop

  OS on the laptop is windows 8.1

  concerning

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Already downloaded and installed Lenovo and Lenovo power management (em8.0.2.5) then click on management of energy has been added to the power option and I activated it and problem solved.

  Thank you

• Factory unlocked iphone 6s gives error sim not supported

  Hey guys

  I recently bought a new iphone unlocked factory 6 sec New York, and he has not used in the States. Now I'm back in my country Pakistan, and it does not recognize the sim card I inserted even if it supports an iphone officially. It gives the same error as below as in the phone itself. Care of apple, I called and they said to restore and update hard resetting, which, after hitting a few tests, does not always work.

  would be really grateful for the help

  Thank you

  

  If restore you like new - then you should see this image-

  If you do not see this image - the phone is not unlocked - contact Apple Care and ask them to check what operator it is locked for

  How to unlock your iPhone for use with another carrier - Apple Support