Offset paper

Similar Questions

• I can't the printer to accept a different paper size. I'm trying to print on 6.5x10.

  I have a HP all-in-One 8600 and am printing from a Mac running 10.6.  I changed the layout to 6.5x10, but get a message that do not match the printer and paper size.

  Hi dawncheryl,

  What applications do you use?

  Follow the steps outlined in the documents below and let me know what you find?

  Offset paper ' or 'Difference of paper size' Error Message appears when you print in Microsoft Word

  Macintosh: Using paper Type/quality control panel to change the settings for printing in Mac OS X 10.5 and 10.6

• HP 5550: Streaks printer / Toner 3D

  Hi all

  My black prints come out with missing toner but the lack of toner appear on the back or on the next page. This happens not always but most of the time.

  The toner on the page almost feels 3D or it has a texture that the other toner has not.

  Please can someone help!

  Thank you

  

  If you could try a 'heavy' or 'card' pilot and setting paper type you could get best performance instead of simply "any type." These type of paper affecting should cause the fuser unit operate at a slightly higher temperature, respecting the toner best. I am not sure about the speed of the motor, but it is also possible that the print engine run a bit slower, which would also give the book a little more time to have toner fused to it.

  100 GM 2 a little heavier than just plain bond paper 20 #(75gm/2), but lighter in weight than a cardstock (218gm/2). I would consider 100 GM/2 equals on a 70 # offset paper.

  As long as its driver paper and printer paper type matching, shouldn't you get a prompt at the printer to load a document.

• Application blocked when calling ICalibration.GetCalibration

  Hello

  Configuration: VeriStand 2011SP1, VisualStudio 2010

  I need to face the calibaration VeriStand API. I developed a Windows Form and the following code is called by a click of a button:

  private / * list* / void GetAllCalibrations()
  {
  toolStripProgressBar1.Value = 0;
  toolStripStatusLabel1.Text = "";

  client access licenses var = new List ();

  var l is new Factory(). GetIWorkspace2();

  NodeInfo [channels];
  var vserror = w.GetSystemNodeChannelList ("", channel);
  If (vserror. IsError) throw new VeriStandException (vserror);
         
  ScaleType scaleType.
  Double [] ais;
  ThermocoupleType thermocoupleType;
  TemperatureUnits temperatureUnits;
  CJCType cjcType;
  String cjcChannel;
  double offset paper;
  Double scale;

  int i = 0;
  iCal var = new Factory(). GetICalibration ("localhost");
  foreach (var c in channels)
  {
  toolStripStatusLabel1.Text = C.nom;
  toolStripProgressBar1.Value = (int) (100.0 * i/channels.) Count());
  i ++ ;

  a value of type double;
  w.GetSingleChannelValue (c.FullPath, value);
  System.Diagnostics.Debug.WriteLine (c.Name + "=" + value);
  If (c.IsScalable)
  {
  iCal. GetCalibration (c.FullPath, a scaleType, ais, of thermocoupleType, of temperatureUnits, of cjcType, of cjcChannel, by offset, scale);
  }
  If (c.IsScalable)
  //{
  var cal = new calibration (ical, c.FullPath);
  If (cal. IsCalibrated)
  //    {
  client access licenses. Add (CAL);
  //    }
  //}
  }
  toolStripProgressBar1.Value = 0;
  toolStripStatusLabel1.Text = "";
  return of the client access licenses;
  }

  VeriStand project, I connect to a a large number of channels (and many of them are scalable). When you run this code, randomly (sometimes after 1000 calls, sometimes after 10000...), it gets permanently stuck in the "GetCalibration" of the API method. The only way to unlock is to kill the process.

  The project can run on the Windows PC local or remote RT target, the problem is the same.

  Note: To reproduce the problem more easily, place the foreach loop in another for loop

  How can I work around this issue? Thanks for your replies.

  Best regards

  Hello

  No, it is the number of calls to the API. In fact the blockage can occur in any API call (not only GetCalibration).

  I modified my code so all API call is now issued by "BackgroundWorker" thread and it seems to fix the problem. It would be just good to know why there is a stall when it is called by the user interface thread.

  Concerning

• constantly getting paper jam messages, paper offset, alignment is not

  When I tried to print an envelope I received a few different error messages. I think the first was on paper, then paper jam. I tried to align the cartridge and received the allignment message has no asymmetrical paper. I tried to reinstall the cartridge, loading and unloading of the paper, removed and replace the paper tray. Help, please.

  I find very hard to read screen tise. How to change the background from black to white?

• How DO I PULL THE PAPER TRAY ON WANT e4500

  I JUST BOUGHT HP ENVY 4500 e ALL IN ONE, I'M HAVING TROUBLE FINDING OUT HOW TO REMOVE THE TRAY paper.

  To offset to load paper, you start renversible open the front door (which is connected to the paper tray and serves as the output tray), then take the door and pull.

• Photosmart C6180 / Mac / Word - trouble printing on paper by a line

  I made it every Christmas for years - print a newsletter on paper by a line purchased in-store. Always worked well, until this year. Paper this year has a darker border than in previous years. The printer offsets the output to the bottom of the page that is equal to the dark border (as its only records the leading edge of the page when he sees the light of colorful paper). Everything works fine when I print the white paper - i.e., no offset to the bottom of the printed output.

  Any thoughts on how to solve this problem? So far, I have lost about 15 leaves try different settings in Word.

  Brian

  Printing from Word 2008 for Mac

  Well Yes, the sensor captures the darkness into the light and call him to some predetermined number.  If your border is located on the margin, it will record is nothing or paper rather randomly.

  Lesson - choosing a lighter border next year

• Color Laserjet MFP M177fw Pro: MFP M177fw load paper

  printer had a paper jam. the paper has been removed. now the printer load paper

  Hi @ncm1,

  Thanks for getting back to me.

  I have recommended to perform cleanup on the rolls of paper several times, to see if she gets the movement document.

  Make sure that you use the correct paper size and type and that you are not overloading the paper tray.

  Handling - paper Manual

  Entry, standard paper management

  • tray of 150 sheets

  The production of standard paper handling

  • 50 sheets facing the low bin

  Maximum output (leaves) Up to 50 sheets Double-sided printing

  • Manual (Manager for support provided)

  Output over management

  • Offset machine leaves

  Supported media formats

  • Letter, legal, Executive, 4 x 6, 5 x 8 in, 8.5 x 13, envelopes (No. 10, Monarch)

  Support, custom formats 3 x 5 to 8.5 x 14 in Support, custom formats 76 x 127 to 216 x 356 mm Types of media Paper (bond, brochure, colour, glossy, photo, paper, letterhead, plain, preprinted, prepunched, recycled, rough), transparencies, labels, postcards, envelopes Weight, supported 16 to 58 lb. (link) Media weight, ADF support 16 to 24 lb

  If the problem persists, contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Good luck!

• Photosmart more B210e - print too close at the edge of the paper to the top edge

  I have a document I printed before without any problem.  Today, I made a few revisions; but it will not print properly - it prints to the edge of the paper [as it ignores the margin]; as a result, the entire document is offset.  I checked my revisions to make sure to not remove or add any formatting, etc..  This document is printed landscape and a table with 4 columns and 2 rows.  Everything that I printed today is correct.  I restarted my laptop and my printer.  Any help very much appreciated;  Thanks in advance... ahintx

  Hi Sahintx,

  Thank you for the additional information. It seems that the paper is not be charged correctly on the paper tray. Follow the steps outlined in the document below and then let me know if you continue to have the same problems?

  The all-in-one is not looking upwards or feeding of the paper in the Photo tray

• Errors to prepare images for offset printing in Photoshop CC 2015

  Errors in preparing images for offset printing

  in Photoshop CC 2015

  I. prepare files for printing on coated paper

  General requirements for all images:

  -contrast

  

  -lighting

  

  -sharpen

  

  Neutral color of objects (gray, white and black) should not have a color cast. The yellowish, reddish, etc.

  

  

• Shift: To match a PMS on paper not icy?

  Hi, please help/advise

  I am new to offset printing, working for a church that creates a great new graphic identity. I work with a graphic designer local to print our newly designed items, and the first point, we sent to print was a small envelope to give money. Our Creator has shown us a digitally printed evidence that seemed very close to our color, PMS 268 C. But, once they have been offset printed, they were much lighter, near PMS 268 UC. I was very disappointed and realized I should have asked coated stock, and I feel my designer is responsible for not mentioning this me / showing me a misleading evidence. Now we need to get a letter printed head, and she told me to match a solid color lining we use glossy paper (she told glossy coated =). It's amazing to me that a digital printer can produce deeper and richer colors on uncoated offset media in paper. Of course, I don't want a glossy, but I can't settle for a such inaccurate colour match. Is there something that I am missing? Our designer did something wrong? Is there anyway to get a match for a coating color on paper lying or at least no ice?

  Thank you

  Dalton

  I wanted to just follow this post incase someone else knows what I went through last year.

  I read on paper coated with a matte finish, is the solution? Is this something that is commonly used?

  The answer is absolutely not. Paper coated with a matte finish is as paper magazine, and a lot of people mistakenly refer to any paper lying as "glossy", where my confusion. Letterhead on any coated paper is unusual.

  It's amazing to me that a digital printer can produce deeper and richer colors on uncoated offset media in paper.

  Yet, but it's surprisingly true. Digital printers can achieve because the ink is located at the top of the page instead of soaking in.

  Is there anyway to get a match for a coating color on paper lying or at least no ice?

  Other than colors that turn out well in CMYK digital as I have just mentioned, no, at least not to my knowledge.

  The error with the envelopes used the number 268, because (as John mentioned) 268 UC isn't necessarily the best match at 268 C, this is the same recipe of ink.

  So, if you are in my position, print digitally, or choose the best match from the uncoated color swatch.

• 78 pages and 40 printer spreads. Possible offset printing?

  I wonder if my brochure is configured correctly. Hope you can help.

  Its size is DIN A4 (210x297mm). The corresponding printer spread is 420 x 297 mm.

  My document has obtained 78 pages and 40 printer spreads - according to InDesigns drop down menu page.

  Looks like it's possible to print in offset printing. True?

  The first and last page is just the back of the printer 'other', expanded after that. Someone told me that I can't print that, because each printing must be divisible by 4. But in the end most are the "spreads" printer - I think

  So what is right? Is it possible to print a 78 with 40 page booklet spreads?

  No, if it is saddlestitched... unless you have a paper back, of course.

  Bob

• Sierra of MacOS e con paper Apple Watch

  Ho aggiornato just he mio MacBook Air 13 "a Sierra of MacOS. HO a Apple Watch 42mm aggiornato con block watch OS 3, con codice. ID active con paper one 2 fattori. Quando provo a lo del Mac paper switch con Apple Watch, dopo aver submitted by Pwd Amministratore, he sistema e rilascia very di error che non riesce a stupid communication Apple Watch e non attiva the fruit. Of course it tutto lo faccio indossando Orologio acceso e sbloccato.

  Chi mi aiuta a risolvere he problema? Grazie

  Ho lo stesso problema pure io. MacBook Air 11 '' end 2015 con Sierra da sta mattina, aggiornato watch a WatchOs3 ho impostato lo con paper 2 fattori my quando vado ad set lo con paper watch, remains in attesa by tempo lunghissimo ed alla fine esce very di error ' non riesce a stupid communication Apple Watch "come one you.

  Speriamo if possa risolvere!

• Default size of paper in the print preview

  Mode legal print preview, I changed the format of paper and now it is the default value. How can I get the default back to letter format and keep so I don't have to change each time I print? Here also the predefined default settings for ink black & white - what should I do?

  You should be able to reset it in the print window, and then select Save current settings as preset.

• Pages: Print flyer A5 on A4 paper

  I have created a flyer A5 using pages and you now want to print.

  Because I used images completely to the edge of the flyer I want to print the flyer in the center of a piece of A4 so I can then cut the paper too far.

  However, whenever I print, it automatically the page towards the top left of the printed sheet, which means that to lose some of the images of the unprintable.

  In addition, it will not print a hairline (despite the option!).

  Thank you

  Simon

  Do what is obvious: build your design in the center of a sheet of A4 with marks crop at the corners so that you know where to cut.

  "Hairline" is not a dimension so don't use it. It depends on the resolution of your printer. Specify 0.25pt rule or test for what is achievable on your printer.

  Also, be sure to use 100% black if you want a solid line, your color is probably a combination of RGB or CMYK coming out as a reason for blurred or nonexistent halftone on something too narrow to reproduce.

  Peter