Ofice jet pro 8500 has more: officejet pro 8500 printing in BLACK when a color is out.how t usually do print in black only?

Similar Questions

• OfficeJet pro 8500 has more: Officejet pro 8500 has will not be printed sheets

  I have an Officejet Pro 8500 has more printer. I try to print the recipes on cards, but everytime I try to do my printer says "incorrect paper size" and then cancels the job. How can I fix it? I have a macbook... I don't know if it's part of the problem?

  Most programs running under OS X obey the size of default page defined by the Print Center/Printer Setup Utility preferences. A notable exception to this rule, however, is that Microsoft Word, which has its own system to decide what paper size to use.

  Change the default value of letter to A4

  Idea of what should be the default paper size is set in the Normal template. Go to Format > Document, and then press the button layout... . Set the size of A4 paper, and then press OK. Press the button by default... , answer Yes to the dialog box, and then press OK. - Source

  I imagine that this also applies to listings so instead of A4, you'd look for 4 x 6! Please let me know if that does the trick!

• HP Officejet Pro 8500 has more stalls now displaying "printing".

  Hi, in the Office I work in that we have 2 HP Officejet Pro 8500 A910 Series. It is on a network with 3 PCs running WIndows 7 and the other is connected via wifi to a PC that is also running Windows 7.

  The problem is that the printer is on a network often stalls displaying "print now" on the screen of the printer. The only way to continue to print is to turn off the computer, and then on again once, wait that he do his cleaning etc. then press print. It's normally ok for this work print, but as soon as other print jobs are added must be reset to zero and the cycle repeats endlesly all day. Until recently the other printer connected via wifi was working fine but now that is also exactly the same as described above.

  Recently, I searched the forums and have discovered that it is a common problem with this type of printer.

  I did the resets partial or total of the two printers without result.

  Bothe printers currently use the firmware version: LRP1FN1126AR, which I believe is the latest firmware.

  Please someebody can explain how to make these printers are working properly? Thank you very much

  Opening and closing the door of cartrdge seem to generate an interrupt that resets the connection and unlocks the pending print job.

  While not solving the underlying abnormality, it is much faster and esier on you and the printer.

• Pavilion Intel Core i3 8 GB of RAM: How can I get my HP Office Jet Pro 8600 printer to work using Windows 10?

  With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?

  Hello

  Please download the software package and the following driver and install on your computer (s) 10 of Windows:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• HP OFFICE JET PRO 8610: printing problem HP OFFICE JET PRO 8610

  I have a problem with HP officejet Pro 8610 print, it prints very slow and then it stop in the middle and then print again after 3-5 seconds, it is very time consuming. I've known this for 2 weeks and this printer is brand new as 2 weeks of age. I tried to reinstall it 3 x already. I use a wireless connection to the printer, but even if you use a usb cable I still encounter this problem. Please help me with this printer.

  Hey @FICONT,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your PC of Windows 8.1 slow printing to your Officejet Pro 8610 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once this is done, please let me know if you still have problems slow printing.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP 6500 has more OfficeJet printer all in one.

  Windows printer test page prints fine (black, logo in colour text) - nothing else prints - black non-existent text, very light print on any color. ink cartridges have been checked and are fine (evidence the test print page very well after the problem has started. my daughter could change some print settings trying to get black and white, rather than a default color - printing anyway to factory reset to original settings if that's the problem.

  Through this site help, reported the quality printing, nothing displayed on the page, except pink ink.

  There are a few things to check.  First check the vents of the ink cartridge is properly erased as shown here in the Solution 2  After checking the events running up to three cycles of cleaning from the Toolbox Panel or a printer. Also try to do a copy - color and black.  If copies are OK the problem is related to the driver.  More likely, it will print incorrectly either, in which case a matter for the printer.  If the ventilation openings are not blocked the post here can help solve the problem.

• Example: Office Jet pro 8610: printer, officejet pro 8610

  This printer can use the 8.5X14 paper?

  Yes it can.

  Link to the 8610 plug.

• Laser Jet Pro M177fw: Printer stuck in the boot when powered.

  the devive won't initialize mode on its own. I can press the home button to access this screen, but nothing works from there. It will not print a configuration report and I can't find a sticker with the serial number anywhere on this unit. HP support isn't much help without the serial number.  Help!

  Hi @GaryW229737 ,

  I see that the printer is stuck in initialization mode and you cannot find the serial number of the printer to provide that assistance from HP. I would like to help you today.

  Typically the serial number is located on the back of the printer, or the printer, there should be a sticker with barcode with listed there.

  What happened before this error message? (paper jam, paper changed a toner)

  I have provided a few steps to try to see if we can solve this problem.

  Disconnect the USB/network/FAX and turn the printer on standalone.

  Check and remove any material packing inside the printer and toner.

  Do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If the problem persists, perform a supply line by unplugging the power cord at the back of the printer and maintaining the power button down for 30 seconds and in the case of a power switch keep the power switch for 30 seconds before reconnecting it to power.

  Update the firmware of the printer. Drivers for MFP HP LaserJet Pro M1217nfw.

  I can send a private message with some one more step to try.
  In the forum next to your handle name simply click on the envelope to see.

  How is the printer connected? (USB, Ethernet, WiFi)

  Please let me know the results.

  Good day!
  Thank you.

• Office jet Pro 8630: printer storage for 18 months

  We are about to travel for 18 months and want to store our printer then out.  I have the original box and packaging ploystyrene, if you want some advice on reconditioning safely - I can find help for printers smaller, but not the 8630.  Also, should I remove the ink cartridges.  Assistance would be most appreciated John

  The cartridges should be stored in the printer.  Be sure to turn off the printer's power switch and let the printer to get things "parked" before unplugging the printer.  Store the printer in a place not subject to significant fluctuations of temperature.  I wouldn't put the printer in its original packing, if you don't do that you keep the printer oriented as it would be on a desk - the package has a normal orientation which has the printer on its side, this should be avoided as the ink of the service area may elapse.  If the printer is going into a storage facility you can put in its original packaging, but make sure the printer 'flat '.

  I had an extra Officejet 8600 more (same inks and printheads as yours) that I implemented, then set aside for a full year.  I was surprised, but the first impression after decommissioning storage printed without needing any fussing in all - no manual cleaning or running cleaning cycles not needed.  I was actually expecting that I would need to run a few cycles of cleaning of the façade, or perhaps even remove the printhead and soak.  I had the printer stored in a spare room, protected from the Sun and away from heating vents.

• Cardstock Laser Jet Pro M252dw print quality

  I have a problem when printing on cardstock.  It is very well at the top of the page, but the background is blurry and it rubs off.  I also noticed a black ink on the back of the pages.

  The cardstock is compatible with a laser printer.

  Hi @srl330,

  Welcome to the Forums of HP Support!

  I see that your problems with burrs on your HP Color LaserJet MFP M252dw Pro. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  As you have noticed that there is ink on the back of the paper, I want you to remove the toner to inspect it. Check on there is ink on the drum, if you see ink on the drum, that the toner is probably leaking. If this is the case, contact HP.

  Otherwise, I would recommend that you try the steps in this guide:

  • Fixing poor print quality

  You use Genuine HP Toner?

  • How to identify genuine HP cartridges.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no can not solve the problem.

  If you have a defective toner, it might be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then check the information of limited warranty for your supplies.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.

  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.

  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home

  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: http://support.hp.com/us-en/contact-hp

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number appear

  Please reply to this message with the results. Good luck!

• Office jet 6500 HP has more: printer is not compatible with the new computer

  Hello!

  I recently bought a HP Pavilion desktop computer and connected to my all in one HP officejet 6500 a more printer. I tried to use the scan function and a message informing that no computer has been detected.  I tried to install the CD however, a message appears indicating that the operating system on this computer was not supported.  Message continued, "the software can be installed on computers running the following systems, Windows XP, Windows Vista or Windows 7" (my old computer that was connected to the printer work with Windows Vista). The message advised me to upgrade the operating system on this computer or install this software on any other computer system.  I don't know what to do to get this printer compatible with my new computer.  Is this possible?  Help, please!

  Hi there lavlock, RnRMusicMan is absent today. With 48 hours removed from this post, you are still in place and scanning? If so, I've always been a strong supporter of, 'if it ain't broke, don't fix it. "

• Office Jet Pro 8600 - Print web page in pdf

  Recently purchased jet Office pro 8600 (previously had 6500), how do I configure to print a web page in pdf format. The 6500 enabled you to set up a printer, similar to the fax printer. Windows 8 operating system

  zGal wrote:

  .... The 6500 enabled you to set up a printer, similar to the fax printer. Windows 8 operating system

  Hello

  No not the printer, he came from a kind of products PDF writer. They are many around as a very popular product called pdf24. You can download this free software from the following link. You can use pdf24 to edit pdf files too. :

  http://en.pdf24.org/pdf-editor.jsp

  Kind regards.

• LaserJet Pro CM1415fnw: HP Laser Jet Pro CM1415fnw prints not (message offline)

  On an irregular basis, my laserJet pro does not print, and it gives a message in offline mode in the print dialog box in MS Word. If I turn off the printer, then turn it back on then all is good. Can you suggest a cure?

  Hi @daleary,

  I was able to open the link in Chrome. Maybe try, if you're still having problems. Here's the link again: printer is offline (Windows).

  Thank you!

• Office Jet Pro 8600 claims on paper when it is not, not at all

  Our printer has begin with the message that it is paper, when it is not.  We tried to charge more, less, loading of flipping the battery etc nothing works.  Hoping someone has dealt successfully with this problem!

  Ray, great call!  Your 'physical' word helped completely.  I decided to go forward as if it were a paper jam and... That's what it was.  Problem solved, thank you very much.

• HP Office Jet Pro 8610: printer goes offline at rest - requires market power when the new document is pending

  Printer and all functions work fine.  However, lately I sent a doc to print who just sits in the queue.  When I look at the printer by clicking on the tray icon I sde is offline.  So I turn the printer off and back to get it on the network.

  I don't really have any options to change my home network and hope it is some of the printer which will avoid going offline like this, or a faster way so he can go online without turn off and on.

  That dot the 'A' and a passage of "T" by the first response:

  The printer model-

  HP Officejet 8610

  Detailed problem description-

  Printer goes offline without warning.

  New print job is in the queue showing the printer is offline.

  Must be able to market, leading to the resumption of the print job.

  Operating system on the computer (including the revision of the service pack)-

  Windows 8.1

  Method - USB, LAN, Wireless cable connection? -

  Wireless, same problem if DHCP or static 192.168.0.253

  Brand and model of router and modem? -

  BrightHouse Cable router/Modem: Arris, H/W version 6, Firmware 8.0.120

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  None

  If wireless, when the problem occurs, which is blue wireless light on the printer, active, disabled or flashing? -

  WE