OK to delete the Partition of "Recovery" on XPS 8700

XPX 8700

Win 7 64 bit

RE: Remove the Partition "Recovery."

I use no Dell DataSafe. There is a partition "recovery" on the boot drive takes about 8% of disk space total and this 'recovery' of 8% partition, about 40% of the space is used. The "recovery" partition has a drive letter assigned to it.

I want to reclaim that space. I guess that the "recovery" partition is part of the Dell DataSafe. I would like to uninstall Dell DataSafe and delete the "recovery" partition and add that disk space.

Question: Can I uninstall Dell DataSafe and delete the partition "recovery." I've never used Dell DataSafe. Can someone tell me which takes 40% of the score "recovery"?

Thank you

Hello

EPSA takes about 2 GB

We recommend custom delete whatever it is, or its possible. Delete all or nothing, as there are chances of file corruption.

Tags: Dell Desktop

Similar Questions

  • DELETE THE PARTITION

    I've got 2 hardrives installed on my HP Pavilion DV8T. I'm trying to reformat the second drive, which is an old hard drive from an old HP. As such, it has two partitions. I managed to format the partitions, but I am trying to delete the partition smaller recovery and for some reason it wont let me. I tried Paragon Partition Manager, and it keeps telling me to reboot to complete the operation, my pc restarts and crashes on a screen with a bunch of code that I don't recognize. Can someone tell me exactly how to delete this partition?

    And why HP makes so friggin hard to access the system you paid the money? I know what I'm doing with my computer in general. I am so sick and tired of having to work around the system locks because HP has decided to stop me from having full access and control over my hardware and software. It's extremely aggravating.

    No, I tried to delete the partition of secondary recovery off HD 1, leaving only partition with all the readers of free space it contains.  One of my friends showed me that I had to use the windows itself, Disk Manager program because Windows 7 was blocking Paragon Partition Manager to access the drive. Once, I deleted the partition with program management built-in drive to W7, the free space immediately added to the other partition on the disk.

    Simply go to control panel and use the built-in in Windows 7 itself drive management utility. I formatted both partitions on HD 1 and then deleted the second smaller partition. This free space of the partitions has been added to the main partition and HD works correctly since.

  • Recovery of a Satellite A100 (PSAA9) - deleted the partitions and XP Home no Pro

    We have recently had trouble with our laptop and decided to restore the settings from the manufacturer with the recovery CD from Media. My son decided to do when he started the program, he chose the option to delete the partitions the crash

    Now, he has completely formatted the HD remove the operating system (Windows XP Pro).
    When I bought the laptop, with what he came already installed WXP Pro and comes from the Certification sticker on the bottom of the laptop.
    Is there anyway I can receive an installation of Windows XP Pro CD?

    Generally, all models of Satellite laptops are delivered with the operating system Windows XP Home edition or Media Center Edition home. Toshiba's Satellite Pro series, and under this name, you can get WXP Pro operating system.

    Can you tell us what model you exactly A100-xxx?

    If your laptop has been in the showroom by the dealer, it is possible they are using clean installation of OS instead of supplied recovery media.

  • Delete the partition created in reformatting/reinstall for A50

    Then when I got my Toshiba Satellite A50, he had no partition that I knew of, just a drive C with XP installed on it. But the disk that it came with to reformat the hard drive and reinstall XP is creating a partition!

    So it's not the original or set up installation I've had... I have an external hard drive, I don't want a partition.

    How can I delete the partition? I'm ready to completely reformat the entire hard drive again, but if so, how do I that?

    The Toshiba CD doesn't really give me a prompt to go reformatting the hard drive me...

    The other annoying, that of my C drive is NTFS, but the disc creates a drive NTFS and FAT32 other... too... which is really scary, is when the Toshiba disk loads, it says "loading Windows 98"... to my understanding of my laptop NEVER had 98 on it... I pray that this is not a 98 - xp upgrade. It seems that someone gave me the wrong drive with my laptop computer?

    Or am I worrying over nothing?

    Hello Lou

    Believe me worry for nothing! Please don t be confused about W98 loading message. The unit starts in DOS mode and it's the same as on W98.

    Now step by step explanation: I did the procedure of recovery many times and have a little experience with it.

    When starts, CD recovery menu displays with two options: modes of STANDARD facilities and EXPERT. STANDARD mode simply erase the whole HARD drive and creates one partition (the whole HARD disk capacity) for the installation of the OS.
    EXPERT mode should be used if you want to install the operating system on already created partition or if you want to create a new partition for the installation of the OS. Note You can create only the first partition it (C :) and you can not edit already created the partition.)

    In my opinion, it is always good to have two partitions, one for the operating system and installation and a second for recording data. You might not always drive external HARD with you. If something is wrong at any time, you can install the OS on the first partition without losing the data stored on the other.

    Anyway, to start the recovery procedure and choose the recovery STANDARD (option 1) procedure. The whole HARD drive will be formatted and Os will be installed on a partition.

    Bye and if you have any other questions please write again.

  • Deleted the partition using a portable drive now computer part starts, it says: no media present

    Original title: Start-up aid

    Well, then I got the bluescreen 0cx000021c yesterday and got during windows startup. I think it is a blue screen of material, if I'm wrong?

    Which is probably my HARD drive that I got a response from here somewhere, and the guy said it was probably a faulty HARD drive.

    I had to get my data from the school of my pc, so I can send my laptop MSI for repairs. I could not find a way to copy my D drive on my drive externel but tried Diskpart to clean everything first, and maybe put it on the C drive D drive, hoping that I could do a clean install without losing the files of my D drive.

    Now to the problem. I feel really stupid to do so, especially to be a 1st year in a COMPUTER at the College course. I use Diskpart and I accidentally this is cleaned up, and I cleaned my table of partition or something like that. So now all my partitions are parties, I have read that maybe my files still on my laptop just my scores have disappeared.

    Now I can't get to the CMD, at the start of my laptop, it says there is no media and then goes to BIOS. I tried a cd Hirensboot, but he repeats to me without media present I also put on Cd/DVD boot first priority

    Hi TonSchepers,

    You deleted the partition, it would be extremely difficult to recover data. You may need to use some third-party data recovery software to get your data.

    Third party WARNING: Using third-party software can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    If your computer is under warranty, please consider the manufacturer. If this is not the case, try these suggestions.

    Remove the hard drive of this computer and connect it to a working computer. Check if it detects the hard drive. If it detects, see if you can back up your data on this computer.

    Try to format the hard drive using another computer and connect it to your computer and check if detects also in the computer.

    Note: Formatting the hard drive, you erase the data on this subject.

    Hope that the information provided is useful. Do not respond if you need more help.

  • Is it safe to delete the partition OSXRESERVED? because it is still there after the installation of windows 10

    I recently got a MacBook Pro 15 "2015 model retina running MacOSX 10.11.5 El Capitan.

    My steps for installing Windows 8.1:

    Create a. ISO file from DVD installation disc and save it. ISO on a USB Flash drive.

    run bootcamp and run the. Location of the ISO on the usb flash drive.

    The SSD partition

    and then it reboot and the windows installer is on and I finish installing Windows 8.1

    then the program to install bootcamp drivers intervenes and installs the drivers

    then it restarts and I upgraded towing 10 Windows later and update the bootcamp drivers

    Then I start to Mac OS X, but the OSXRESERVED partition is still there.

    And when I restart by pressing the option key, I see 1 Macintosh HD but 2 displayed Windows disks

    Is it safe to delete the partition OSXRESERVED?  I read online that deleting it will cause 10 Windows do not to start over.

    Or should I leave it alone?

    Bump

  • How to delete the partition CDFS on PX1267E - 1 32?

    Now how can does anyone I delete the partition on that disk (PX1267E - 1 32) CDF?
    I want this disc using as an external USB without the CDFS partition hard drive.
    I do not use the REGEN backup software.

    Is this possible? I've tried several programs to delete this partition, but now, we did get the job done.
    Thank you

    Hello

    To be honest I ve no experience with these external hard drives, but generally the scores of all would be removed from the HARD drive if you want to format the HARD drive.

    Try to format it!

  • Cannot delete the partition with windows xp a clean installation

    Hello
    Thanks in advance for any help.
    I'm doing a clean install of windows xp pro. When I get to the screen to delete the partition by pressing the d nothing happens. I'm sure start out of the cd. First attempt to do a fresh install. Any help would be appreciated

    Hi rlsajs,

    Is it a custom computer or pre-built as a HP, Dell, etc. ?
    Is your USB keyboard? If so, you may need to enable "bios powered" usb in the BIOS of your computer.
    By default, many computers are set to "Operating System" controlled USB which means that your keyboard does not work entirely until Windows has started, and you need it to work before Windows started as you go through the Setup for a new installation.
    Hope this helps and answer back with questions. If you need help getting into the BIOS of your system you will need to contact the manufacturer of your computer.
    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.
  • Impossible to delete the partitions or format C

    I have a mobile shadow Smart Power (a special Aldi 2004), which comes with no hidden restore disc, but it has a much utility and disk etc. drive OEM drive.  I need to reformat C and reinstall XP Home... nothing seems to work - after surfing several hours for a reply and try to all the ones I found!  I can not get an option to format using disk management, because it is grayed out, and if I use the disc provided as a boot disk, I can't delete the partition as it says that it is in use / mounted.  Can anyone help please... as I suspect that the XP disc resembles C and just by looking at him, he believes that it is in use, so it will not let me delete the partition or format C.  I don't know how to get around this problem with the discs that I have... and experience tells me that shadow are desperate for assistance to the user, so there is probably no point of contact with them.

    All I can understand about shadow is that it was an Austrian company which has since been bought by a Taiwanese company and has almost no information available online support (although there seems to be quite expensive telephone support lines).

    You cannot remove or format the system partition (the one where Windows) of Windows.  This is why there are bootable CD installation/restoration of the system, the idea being that if you run with an operating system on the CD, you can do what you like on the hard drive.

    Your drive "OEM", is supposed to be a system restore disk or just a collection of software and drivers?

    If it is a restore disk, when you start from it, it should just restore the computer to its original state, or at least give you an option to do so.

    Can you describe the screens that appear when you start from your OEM drive?

  • If the user accesses the server accidentally deleted the folder how recovery

    If the user accesses the server accidentally deleted the folder how recovery

    Hi AmjadPasha,

    If you are referring to a local file, you can check the trash.

    If you are referring to a network share, then there is very little that can be done.

    You can try using recovery software/services of third parties to retrieve the file.

    You can use your favorite search engine to search for third-party software.

    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information is useful.

  • make a simple bootstrap system and delete the partition

    I had a window of crash - like (although I don't know the condition) and I went to the computer-fixing shop and tell them to fix my machine... then they finished and when I got home got hard drive partition and I have multi-boot system... I want to delete the partition and format the primary partition has if little volume... can someone help me what I can do because I tried to format it, but all came to the error... Please help me

    Remove accidental installation of a 2nd copy of Win7

    Uninstall Windows 7 on a multiboot system (applies to remove 2nd install Windows 7 as well)
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-Windows-7-on-a-multiboot-system

    To remove the Windows 7 multiboot screen

    Even if you delete or format the partition containing Windows 7, it can still appear as an operating system option when you start your computer. You can remove Windows 7 from the multiboot screen.

    1. open System Configuration by clicking on the button start the picture of the Start button, clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration. ? Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    2. click on the Startup tab and then click on the list? Windows 7.? (That you removed)

    3. click on remove, set the time of '0', click on 'Apply' and 'OK' and then click on restart.

    Start-up of the first copy of Windows 7 (normally the the second entry in the start menu).

    Install EasyBCD:
    http://NeoSmart.NET/DL.php?id=1

    Make sure you use indeed the 1st copy that you have installed. Open "Disk management", the partition that you started now will be marked as Boot, Page File, Crash Dump, primary Partition of Windows 7). The other (second copy) will be marked only as "Primary Partition".

    Now using disk management to format the partition where the second copy is installed.

    Run EasyBCD and remove the entry for the second copy.

    J W Stuart: http://www.pagestart.com

  • Help, please.  Need to delete the partition.

    I searched a lot and do not know that I find what I need.

    I have a MBP with OS x 10.6.8.  I'm under VMWare Fusion 2.0.8.  I used to use it for work, but now can log on my work computer at home and have not run the Windows partition in over a year.  My HD had inflated and has only 7 GB free.  I want to delete the partition in VMWare so that OS x can use this 15 GB.

    I found this set of instructions to search for the file in the finder:

    http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & ocTypeID d = DT_KB_1_1 & externalId = 1007599

    And this instruction set seems to indicate I should just drag the file from the finder to the Trash:

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = Display KC & externalId = 1017838

    And then I'll have access to this part of the HD.

    I'm on the right track?

    Thanks in advance for any help

    TL

    You are on the right track-

  • I want to delete the partition recovery of 1.5 GB of my Satellite A100-786

    Hello

    I have a Toshiba Satellite A 100 - model 786. There a 120 GB.n HARD drive which 1.5 GB isa configuration partition factory and the reast is for my use, I guess its for Win Re... .but I do not have wsant this partition wat I do haveto do. I used disk management but this 1.5 GB remain unallocated and he does not even gets extende. Pls advise.

    Thank you

    Moosa Anis

    Hello

    why you want to delete this partition? Because of the extra hard drive space you will win? The cost of a system of recovery very nice and comfortable, which is really good? See, if your system has serious problems and you want to recover your machine, what will you do then?

    So if you're really sure you want to do, then do as following described:

    Enter a cd image of the windows-live-cd 'UBCD4Win"(http://www.ubcd4win.com/), cd burning, start, and change your partitions with it, should work withour problems.

    Welcome them

  • Delete the folder of recovery on Satellite L300D

    Hello!

    For the error I deleted file recovery on the second drive and now when I try to retrieve the full Windows operating system to its original state, I get the following error: the recovery of the operating system is impossible! Could not find file recovery HARD drive on the second disc of the first hard drive.

    I still have the Eisa partition intact, I think that the backup is located on this partition, and just the installation folder is missing.

    The exact model is L300D-10U.

    Help, please.
    THX

    Hello!

    If you have deleted the recovery file, you cannot recover your laptop, this is no longer possible.

    In the user manual is the following information:
    > If the preinstalled files are corrupted, use the product Recovery DVD-ROM to restore

    If you created the recovery disc, you can restore these files. If you didn t this and want to find your laptop, you need a new drive.
    You can get this drive to an ASP.

    Good bye

  • Deleted the partition of hard drive on Equium A100-338

    I have a laptop Satellite A100-338 with vista premium installed, age of 2 months.

    I had to reinstall the product recovery disc factory settings worked well all but it seems to me removed WIN RE partition, which I think is data for recovery and diagnosis cannot get that back from the drive of product data and if so what should I do?

    Hello

    Whenever when you use delivered recovery DVD WIN RE partition will be created in front of the first partition (C).

    If you have the second partition (D) on your laptop, it will be also deleted. Unfortunately the procedure of recovery with Vista operating system is not very good as previous WXP. If please be carefula on this subject, as you may lose all the data saved on the D partition.

Maybe you are looking for