Old laptop will not come to the top. To get the files and documents for the new laptop

Similar Questions

• IE8 will not come to the top. I get diagnose problems when router connection bed Excellent 54 Mbps

  Internet Explorer will not come to the top.  My router says I 54mpbs Exellent, but I can't go on the internet.  Diagnose the problem button appears.  When I run it, it says that my router is not working.  I have wifi and my friend has the router and its connection is good.  I also have a propellant that works great too.

  Can you get far enough in IE to access the Tools Menu?  If so try clicking Tools | Internet Options | Advanced and clicking the reset button.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• I updated adobe and now windows vista will not come to the top!

  I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all.  I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.

  Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X.  Then try to restart normally.

• Interface 1130ag WLAN AP will not come to the top?

  Hi all

  For the first time, I installed a 1130ag and I can't bring up the interface without wire/radio?

  I have connected it via http at the moment and have tried to activate the radio via the GUI, but it does not come to the top? (This is normally upward in this way with the year 1200)

  Can anyone suggest anything?

  Thank you very much

  Nathan.

  UK.

  Have you defined a SSID? If you have not the radio will not come to the top.

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• Security Windows will not come to the top

  lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to

  lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to

  It seems that your system has been infected:

  Preform Malwarebyte s scanning:

  http://www.Malwarebytes.org/ recommended

  then the use of scan of preform

  a-squared Emergency USB Stick files http://www.emsisoft.com/en/software/download/

  After that, make sure that your system is free of viruses:

  http://www.Avira.com/en/download/index.php

  If you can not install anti virus Software, then try to scan online

  http://housecall.trendmicro.com/UK/

  and spyware:

  http://www.systweak.com/AntiSpyware/

  http://www.SurfRight.nl/en/downloads/ recommended

• Old games has not transferred to the new device

  Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

  dlb104 wrote:

  Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• Static L2L Tunnel - will not come to the top

  Hi all

  Currently have a very big problem with a site that I can't go there for the moment.

  We have one HUB ASA5505 SEC + a few other ASA connected via VPN L2L. We have static L2L 1 active, 1 dynamic L2L Active, and I am currently trying to add a second static Tunnel L2L.

  I checked that each WAN Interface can ping each other, and both devices have full internet connectivity. There is no double nat or being content filtering. I noticed that my Client remote access VPN Cisco will not properly connect through the ASA despite full internet connectivity, but when I connect directly to a modem, I was able to connect properly. So apparently the ISP isn't blocking IPSEC traffic as far as I KNOW.

  Static2 uses currently a temporary license of TAC since our license is currently waiting for arrival, but a release of version see the watch all VPN/3des features are enabled.

  Here are the configs:

  ASA5505-HUB hostname
  domain xxxxxxx.local
  activate the password xxxxxxxxxxx
  names of
  name 192.168.9.50 xxxxxxxxx
  name 192.168.9.51 xxxxxxxxx xxxxxxxxxx description
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.9.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address xxxxxxxxxxxxx 255.255.255.248
  !
  interface Vlan3
  nameif dmz
  security-level 50
  IP 10.10.9.1 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  switchport access vlan 3
  !
  interface Ethernet0/5
  switchport access vlan 3
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passwd xxxxxxxxxxxx
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name xxxxxxxxxx
  Server name xxxxxxxxxxxxxxx
  domain xxxxxxxxxxxx.local
  permit same-security-traffic intra-interface
  permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
  access-list 101 extended allow icmp a whole
  access-list standard split allow 192.168.0.0 255.255.0.0
  permit to_static1 to access extended list ip 192.168.0.0 255.255.0.0 192.168.14.0 255.255.255.0
  permit to_static2 to access extended list ip 192.168.0.0 255.255.0.0 192.168.16.0 255.255.255.0< this="" is="" the="" problem="">
  RTP list extended access udp any permitted any 10000 20000 Beach
  RTP list extended access permitted tcp everything any 10000 20000 Beach
  pager lines 24
  monitor debug logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 dmz
  mask IP local RA-pool 192.168.99.1 - 192.168.99.126 255.255.255.128
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 75.146.188.94 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.0.0 255.255.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  set of 20 SYSTEM_DEFAULT_CRYPTO_MAP crypto dynamic-map transform-set ESP-3DES-SHA
  card crypto outside_map 10 correspondence address to_static1
  card crypto outside_map 10 peers set xxxxxxxxxx
  outside_map crypto 10 card value transform-set ESP-3DES-SHA
  card crypto outside_map 11 match address to_static2
  card crypto outside_map 11 counterpart set xxxxxxxxxxxxx< problem="">
  card crypto outside_map 11 game of transformation-ESP-3DES-SHA
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.9.101 - 192.168.9.199 inside
  dhcpd dns 192.168.9.2 xxxxxxxxxxx interface inside
  dhcpd xxxxxxxxx.local area inside interface
  xxxxxxxx dhcpd option 66 ip inside interface
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  type of policy-card inspect sip default_sip
  parameters
  Journal of decline in the shares of Max-forwards-validation
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  inspect the rtsp
  inspect the default_sip sip
  !
  global service-policy global_policy
  Group xxxxx-RA internal policy
  xxxxx-RA group policy attributes
  Server DNS value 192.168.9.2 xxxxxxxxxxxxx
  Protocol-tunnel-VPN IPSec l2tp ipsec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split
  xxxxxxxxx.local value by default-field
  allow to NEM
  IPSec-attributes tunnel-group DefaultL2LGroup
  pre-shared-key *.
  type tunnel-group xxxxx-RA remote access
  Tunnel-Group global xxxxxx-RA-attributes
  address-RA-pool
  Group Policy - by default-xxxxx-RA
  tunnel-group xxxxxx-ipsec-attributes
  pre-shared-key *.
  tunnel-group STATIC2_WANIP type ipsec-l2l< problem="">
  IPSec-attributes tunnel-group STATIC2_WANIP
  pre-shared-key *.
  tunnel-group STATIC1_WANIP type ipsec-l2l
  IPSec-attributes tunnel-group STATIC1_WANIP
  pre-shared-key *.
  context of prompt hostname

  and...

  ASA5505-STATIC2 host name
  domain xxxxxxxx.local
  activate the password XXXXXX
  passwd xxxxxxxxxxx
  names of
  !
  interface Ethernet0/0
  switchport access vlan 3
  !
  interface Ethernet0/1
  switchport access vlan 2
  !
  interface Ethernet0/2
  switchport access vlan 2
  !
  interface Ethernet0/3
  switchport access vlan 2
  !
  interface Ethernet0/4
  switchport access vlan 2
  !
  interface Ethernet0/5
  switchport access vlan 2
  !
  interface Ethernet0/6
  switchport access vlan 2
  !
  interface Ethernet0/7
  switchport trunk allowed vlan 1-2
  switchport trunk vlan 1 native
  switchport mode trunk
  !
  interface Vlan1
  nameif dmz
  security-level 50
  IP 10.10.0.1 address 255.255.255.0
  !
  interface Vlan2
  nameif inside
  security-level 100
  192.168.16.1 IP address 255.255.255.0
  !
  interface Vlan3
  nameif outside
  security-level 0
  IP address xxxxxxxxxxx 255.255.254.0
  !
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name xxxxxxxxxx
  Server name xxxxxxxxxx
  domain xxxxxxxxxx.local
  access extensive list ip 192.168.16.0 to_hq allow 255.255.255.0 192.168.0.0 255.
  255.0.0
  192.168.16.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.
  255.0.0
  pager lines 24
  MTU 1500 dmz
  Within 1500 MTU
  Outside 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400

  Route outside 0.0.0.0 0.0.0.0 xxxxxxxxxxx
  Global 1 interface (outside)
  NAT (dmz) 1 0.0.0.0 0.0.0.0
  NAT (inside) 0 access-list sheep
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.0.0 255.255.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto cmap1 match 10 address to_hq
  card crypto cmap1 10 peers set xxxxxxxxxxxxxx
  cmap1 crypto 10 card value transform-set ESP-3DES-SHA
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd dns 192.168.9.2 xxxxxxxxxxxx
  !
  dhcpd address dmz 10.10.0.100 - 10.10.0.199
  dhcpd lease 10800 dmz interface
  dhcpd enable dmz
  !
  dhcpd address 192.168.16.101 - 192.168.16.131 inside
  lease interface 10800 dhcpd inside
  dhcpd xxxxxxxxxx.local area inside interface
  dhcpd ip interface 192.168.9.50 option 66 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  tunnel-group HUB_WANIP type ipsec-l2l
  IPSec-attributes tunnel-group HUB_WANIP
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname

  Any help is appreciated

  Hello

  Seems to me that the ASA named STATIC2-ASA5505 lack some essential associated VPN configurations.

  The encryption card is not attached to any interface

  Configure this

  cmap1 interface card crypto outside

  The Crypto ISAKMP is not enabled on any interface

  Configure this

  crypto ISAKMP allow outside

  Hope this helps

  -Jouni

• C510a: C510a software will not install on the new Dell laptop - can not find USB ports

  I just bought a new laptop Dell 7710, running Windows 7.  When I try to install the driver software for my printer HP C510a, Setup performs a check of the system and tells me that I don't have a USB port, and the option that provides the installation routine is to interrupt the installation.  I have 4 ports USB 3.0, which work very well with any other USB device that I've plugged into them.  I downloaded the latest version of the software C510a driver and still have the same problem.  I really same useless USB port on the printer because I connect via my WiFi network.  I run HP diagnostics in order to try to identify the problem and that they can find the printer and identify it on the WiFi network, and they also recognized as USB ports.   But the software C510a stilll don't have USB ports and refuses to load.

  How can I get HP to fix their software driver for a product that is not common, but always prints as well as ever?  It is also mute to require the presence of a port which is not required to connect to the printer.  If I replace theis printer in order to print from this computer, the replacement will certainly not be another HP.

  Hello.

  Inside, File Explorer type folder in the address bar and press ENTER.

  Search the last HP installation file that begins with 7Z (e.g. 7zs1234)

  Open the installation folder.

  Find the file usbready.exe and rename it to usbready.old

  Browse a level upwards and double-click Setup.exe, now follow the installation and check for the difference.

• I have two monitors and Firefox will not come on the screen.

  When I try to open Firefox it will not load on each screen. Looks like he's trying to go to the secondary screen, but is not visible. The OS is Windows 7 Home first Service Pack 1. Firefox version 37.0.1
  Thanks for your help.
  Jerry

  You get a sticker or other indication on the Windows task bar that there is a window of Firefox "somewhere", but it is not visible anywhere?

  If there is a tile (or a title of the window above the Firefox button in the task bar):

  The Firefox window sometimes opens off screen. If you have a multiple monitor configuration, make sure that both monitors are on. Other users have reported that sometimes Firefox acts strangely while the second monitor is turned off. You mentioned that both monitors are on in your case.

  In all other cases: you can often force the Firefox window is displayed on the screen by double clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

• Specific color object will not come to the front.

  I created a logo in Illustrator and saved as an AI. When placed in an inDesign document, one of the objects in the logo goes to the rear and refuses to come to the front. If I copy and paste the logo from Illustrator into Indesign is the same question. If I use a different color for the object in the logo and brings him to the then it works, but if I try to change the color to what I want in inDesign it automatically sends to the back and refuses to manifest. If I recreate the Logo in inDesign and use specific color, I need, it sends the object to the back. In addition, there, it's not transparent or blending modes applied to all the.

  I'm puzzled!

  Screenshots?

  If the file is set to overprint?

• CS5 Design Standard. Will not activate on the new HARD disk following transfer of old HARD drive. Displays error 213.10 have number series/s etc.

  I recently encountered a problem with a HARD disk drive. So I had to replace it with a new one. Fortunately, I managed to recover the data and applications on the original disc.

  However when I transferred and installed after Adobe CS5 Design Standard on the new HARD drive it will open all Adobe apps.

  He invites a 213.10 error every time. I do not see where to disable or reactivate... Please notify suggested action plan.

  Also, I'll be able to successfully access my previous files after the relocation/activation?

  Thank you very much

  R

  Reinstall correctly. Activation does not work because in the technical sense is not simply there. Screw you them. Run the cleanup tool if necessary and contact support to reset the activations.

  Download the CS5 products

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Mylenium

• Diablo 1 does not at all, 12 years old game does not work on the new computer

  Hello, I have a Toshiba Satellite P200 with Windows Vista 32-bit, it has an ATI Mobility Radeon HD 2400 video card. I also have 10 installed Direct x which, according to the manufacturers of my video card is compatible. I ran a test game that was included with the CD and it said that everything is okay. But it is still coming up with this error. "Diablo could not correctly initialize your video card using directX" then it tells me to update my directx which I did. check and update my driver for my graphics card and make sure its compatiable which I did and it's. I've been to Blizzard games, and they said that can not help me and I have to go to the manufacturer of the video card. I went to them and they said because it was a laptop they cannot help me with this and told me to goto, the manufacturer of my laptop that I do at the moment, but if someone had this problem and have any ideas how I can get this race please tell me thanks.

  This game was designed for Windows 95. Of many old games do not work under NT (on XP and Vista) kernel unless you use the emulation such as DOSBox.

  You can try setting the game to run in Windows 98 compatibility mode (click with the right button on the games EXE file, select Properties-> Compatibility tab).

  Otherwise, you will need to install Win95/98 and possibly to use a video card more old since display drivers change so rapidly and drop the old features not more used.

• BT Yahoo mail will not switch to the new style when using Firefox

  I had to do a re - install under the motherboard has failed. I use BT Yahoo email. On the home page, I get a link "switch to the new BT Yahoo! Mail". That is the link allows to set up the new style and I can then do what the home page and opening in the new style every time. In Firefox help happens nothing other than 'click' navigation and a brief glow and I am still on the old.

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

  Here are the steps to make a clean reinstall for reference.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

• the system will not stop after the new update

  System was updated with the new updated 05/24 and now will not shut without using the power button / stop what happened, how this can be corrected?

  FWIW, software Wacom has started to cause a problem with OSX 10.11.5. If you have installed you need to uninstall or check and see if the latest drivers Wacom released a few days ago helps. If you have any Wacom software, there are some others mentioned in the CSA programs that cause the same symptom. I don't remember which off the top of my head.