OMEN of HP for laptop - 15-5001la: control of OMEN of HP does not work on windows 10

The title is self-explanatory, I have the latest drivers and installed HP software.

Solved by updating the HP System Event utility.

Source:

http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-omen-control-software-no-longer-works-after-Windows-10/TD-p/5169933/page/3

Tags: HP Gaming

Similar Questions

  • Qosmio G30 - Media center remote control does not work in windows

    Dear all,

    I have a Qosmio G30-194,
    first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
    Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

    Please advise me what to do, should I send it to the service center, or there is an easier solution.

    Mazen h
    NB:,: my laptop info are:

    PQG32E-01P018AR model number

    Thanks in advance

    Hello

    > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    If you had a problem with the VGA chip then the whole motherboard has been replaced.
    Maybe it has something to do with your problem.

    Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

  • I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

    Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

    original title: Wireless problems after install.

    I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

    Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

    While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

    You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

  • I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

    I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

    Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • application of foxpro for Dos does not work under Windows 7 Home Premium 64-bit

    Dear Expert help me!

    My foxpro for Dos application does not work under Windows 7 Home Premium 64-bit. Please advice me! How can I do for running under Windows 7 64-bit

    waiting for early response
    Thank you and regards

    SAIF Ali Sabri
    Faisalabad, Pakistan
    E-mail address is removed from the privacy *.
    + 923007960782

    16-bit applications are not taken charge/does not not on 64-bit Windows

  • The foot pedal RS27 and Olympus AS-5000 - work of transcription for Windows 8 or 10 (pedal does not work on Windows 7 and do not want to shell out $300 to Olympus again)

    The foot pedal RS27 and Olympus AS-5000 - work of transcription for Windows 8 or 10 (pedal does not work on Windows 7 and do not want to shell out $300 to Olympus again)

    Any help Nauru will be stuck with Windows Vista, I had to get three versions of Olympus and their pedals over the years and all they do is change the wiring or jacks, stupid as * I just like five different types.

    Desperately need to know if these pedals will work or does he know about the Sony or another software of transcription for the typist, not the dictator.

    Help.

    Hi Marvin,.

    Thank you for the quick update.

    Yes, I understand your question. However, if the programs worked with an earlier version of Windows, they can work with Windows or Windows 10 8.1 if you install programs in compatibility mode. If you access the executable file (.exe) for the game, I suggest you follow the steps provided below:

    Step 1: Download and save programs on the desktop.

    Step 2: Install the programs in compatibility mode.

    • Right click on the .exe file and click Properties.
    • Go to the compatibility tab.
    • Check the box for run this program in compatibility mode for:
    • In the list of operating systems, select Windows Vista (or any other compatible OS) .
    • Click OK.
    • Double-click the executable file to install the program and follow the instructions on the screen.
    • Restart your computer.

    Additional information:

    Make the programs more compatible with this version of Windows

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • 4clipika for satluj police (Punjabi) does not work with windows 8

    R/Sir

    4clipika software for satluj police (Punjabi) does not work with windows 8, but it works with 7 and windows xp. Please solve this problem.

    BSwakaf

    I suggest you cont developer patches or updates.  It is for the developer to make it work with win 8-not the other way around.

  • Some hyperslinks in the exported PDF file takes the Viewer to the pages "broken/missing. For example, the hyperlinks to specific of Youtube videos does not work, they brought to a youtube page is missing.

    Some hyperslinks in the exported PDF file takes the Viewer to the pages "broken/missing. For example, the hyperlinks to specific of Youtube videos does not work, they brought to a youtube page is missing.

    Hi Sarah!

    I solved it! I had to use the original URL shorter links to create

    functional hyperlinks or try to short the links using Google URL Shortener.

    I don't know why it worked by doing this, but he did!

    With the friendly and happy greetings!

    Sonny. A

    2015-11-24 9:32 GMT + 01:00 aadeshs76610910 [email protected]>:

    You talked

    by aadeshs76610910

    https://forums.Adobe.com/people/aadeshs76610910?et=notification.mention> * in

    Re: A few hyperslinks in the exported PDF file takes the Viewer to

    pages "broken/missing. For example specific Hypertext to Youtube videos links

    does not work, they will bring to a youtube page is missing. in Adobe

    Community *-view aadeshs76610910 you reference

    https://forums.Adobe.com/message/8209923?et=notification.mention#8209923>

  • Hello, im trying to install CS2 for my mac (yosemite 10.10.3) but it does not work because PowerPC is required! This means that I can't use cs2 with my version? and if I want to use ist what to do? Thank you friends :)

    Hello, im trying to install CS2 for my mac (yosemite 10.10.3) but it does not work because PowerPC is required! This means that I can't use cs2 with my version? and if I want to use ist what to do? Thank you friends

    CS 2 is very old version that uses Power PC, but a newer version than Mac's Intel based processors. CS 2 has been designed according to the Power PC architecture.

  • I try to install my cs6 online ot. It is said that my code was bought, but I took it out of one of my laptops to download on it. It still does not work. Help, please

    I try to install my cs6 online ot. It is said that my code was bought, but I took it out of one of my laptops to download on it. It still does not work. Help, please

    Quickly find your serial number

    Download the CS6 products

    Activation & deactivation help

    Mylenium

  • my serial number for adobe photoshop elements 12 and first 12 items does not work

    My serial number for adobe photoshop elements 12 and first 12 items does not work.  On adobe.com, it shows that I received the serial number is associated with adobe photoshop elements 9 and first elements 9.  I bought these products in the past, but recently upgraded to 12 items.  Can I use the Organizer in photoshop, but could not open the editor of photoshop.

    You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

    Here is a link to a page with options to help make contact:

    http://www.Adobe.com/support/download-install/supportinfo/

  • Laptop Acer Aspire 5742Z-4685. Right-clicking does not work

    I introduce myself first, I'm 70 years old, a qualified electronic former Tech at the time we could not dianose componnet level for repairs. That's some 50 years ago, when "Transistors" were the most recent thing and the best around because the slices of bread, I kept my hand in all these years now, I generally pick up or buy laptops more elders or trays of office and repair install them a decent OS used XP but now finally agreed win 7 and use more.  Once started properly I sell them to local poor people in my area for what I have in them, and sometimes even give one to someone in need.  Just my way hopefully help someone at school and maybe have a better chance in life.

    The right click button does not work on the mouse pad, as well as a usb mouse. I used Acer to factory restore disks to restore it to out of box state. Same question. If you use the control panel to switch the buttons then the only thing that happens is the cursor move no click at all.  Also after a period of rental time computer warm up suddenly the cursor works, but even the left click will not work it will highlight the icon but not allow you to click on it. I wonder is the only solution to replace the motherboard as it seems to be a worse problem of heat.  Any help would be greatly appreciated.  And before I forget, Yes, I replaced the drivers a couple of both clean install so

    RichardDaigle66,

    Looks like you did everything I thought and much more. He makes it sound like a problem with the hardware at this stage and would require the replacement of the motherboard. Looks like that the southbridge is not working properly.

Maybe you are looking for