on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

Similar Questions

• I have usef to operate only on PC, but now I have this 2009 macbook Pro.  He had a record of 7200 RPM... but he died... I want to put a hybrid SSHD on it... will it run slower?

  I used to work only on PC, but now I have this 2009 macbook Pro.  He had a record of 7200 RPM... but he died... I want to put a hybrid SSHD on it... will it run slower?

  Several years ago I tested both a hybrid version Seagate 1 and later version 2 with my 13 "2009 MBP and the computer started more quickly with one of these drives with 7200 RPM drive. But that and save files were the only time where I saw an improvement of high speed. So no, not slower, but not really all that much faster. I ended up installing an SSD in the computer. Now that was an improvement.

• The Sierra of MacOS will propose for the Mid 2009 MacBook Pro in the near future?

  I have a model Mid 2009 MacBook Pro and when I try to upgrade the software of OS systems to the Sierra, he refused my request to download because it "cannot be downloaded to this computer." I noticed other Mac computers, for example, iMac Mid 2009 or newer and MacBook Mid 2009 or more recent systems only one are close to mine are candidates to download the software, but the MacBook Pro is the only one that is not on this list for availability. So, my question to my question is, will be available Mid 2009 MacBook Pro updated to day for Sierra anytime soon? And if not, why?

  Please let me know what your answer is as soon as possible.

  Thank you!

  My answer is no.

  However, as long as I and everyone here, do not work for Apple, my answer is certainly not authoritative.

  However, as I've used Apple computers for more than 30 years, he never had a case when they released an additional OS that works on previously excluded material.

• Can I put a 2009 MacBook Pro? TO

  Can I pass a 2009 MacBook Pro safely to El captain?

  You can upgrade to El Capitan, but make sure first that you have a backup so that you can restore your system, if you find El Capitan too troublesome.

  Most of the problems with the El Capitan upgrades have to do with incompatible software. Get rid of any Mac cleaners, boosters, antivirus software and so on. Check all your applications and delete that you rarely use.

  You can find el Capitan is slow compared to your current configuration. You could improve performance El Cap by upgrade your hard drive to a disc solid state drive (SSD). You can now find a very reasonable price.

• Memory can be increased on a late 2013 Macbook pro of the retina?

  Memory can be increased on a late 2013 Macbook pro of the retina?

  It is welded in place and not extensible

• what external hard drive should I buy to save a 2009 MacBook Pro with USB 2.0 port?

  I want to back up the hard drive on my circa 2009 MacBook Pro (13 '') with Snow Leopard.  There are so many things out there and I want to get the right one!  My MacBook has only a USB 2.0 port.  I need to do this because I take the machine to have the battery replaced and because I am buying a new machine soon and would like to transfer things I backed up on my new machine.  Any recommendations for what is the most appropriate portable drive would be greatly appreciated.  Thank you in advance.

  Frances

  I use this external enclosure: http://eshop.macsales.com/item/OWC/MSTG800U3K/

  Can take any 2.5 in drive (HD or SSD).  I swap currently 3 bare drives (WD 750 GB Black) for familyvideos/data, clones, test data discs.  $72 seems expensive, but it has Firewire 400/800 and USB 2.0 and 3.0 interface for use with many computers.

• My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  Apple has set the rates, price around $300 repair program.  I don't think you can get a price of paste elsewhere.  However, there are third-party sites that provide repairs, parts and helpful videos.  Google is your friend.

• I have a MacBook Pro and a Canon MX452. I have updated the OS on my MacBook at Yosemite 10.

  I own a Canon MX452 and a MacBook Pro (2010 model). This week I've updated the MacBook to Yosemite 10.10.3 operating system. Subsequently, I found the printer / scanner functions would not work. I have topped up the printer CD and was also invited to download drivers charge more on the Canon site, which I chose the ICA and the Canon IJ Network Tool V4.5.0 pilot V4.0.0 (don't know if they are good or not).

  I managed to get the printer works when you use the USB cable to the printer. I couldn't get the printer and the scanner works wireless. The light shows blue printer that is connected to my network ok. I also noticed my iPad and iPhone does not "see" the printer either.

  I deleted and re-charge the Canon software several times. I followed the instructions of Canon for:

  -Connect the MacBook to the router with a ethernet cable and go through the instructions to 'connect' the Canon MX452. But eventually, the MacBook says the Canon MX452 is 'offline' and I can only get it to work with the USB connection.

  Any guidance would be most appreciated me for:

  -get the printer and the scanner works wireless

  -get the Air-Print function works with the iPhone and iPad

  Thank you

  Stephen

  Hi John

  Five trys later, I finally got figured out. Thanks a lot for the link you provided. He helped me through the iterations until I finally got

  Best wishes

  Stephen

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Give it time - it may take a few hours depending on the size of your library is

  LN

• MacBook Pro 10.9.5... documented can one scanned be edited? If so, how?

  MacBook Pro 10.9.5... documented can one scanned be edited? If so, how?

  Images can be changed with an image editor, such as Acorn Flying meat or Adobe Photoshop or other tools.   Some scans documents can also be converted to a usable state, via the optical characters (OCR) module text reader software.  Here's a related question, with a few links to available OCR tools...

• I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  Open Airport utility, select the Time Capsule and then use the option erase to erase its contents.

  How to check or erase a disc AirPort Time Capsule - Apple Support

• With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions

  With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions?

  Hello

  Please make sure that you work in 8 bits/channel and RGB mode. (Under Image > Mode > Select RGB and 8-bit per channel) lightning effects only works in this mode.

  Also in preferences > Performance > "Use Graphics Processor" must be checked.

  

  ~ Assani

• I have PS4 on my MacBook Pro. I had to reinstall Yosemite, so I backed up on external hard drive. I can't make it work now. Any advice?

  I have PS4 on my MacBook Pro. I had to reinstall Yosemite, so I backed up on external hard drive. I can't make it work now.

  Any advice on what to do?

  And there it is. Photoshop CS4 migration breaks the license that gives you the error 150:30.

  You do not want to reinstall Photoshop CS4 on your disks and perform the updates.

  Gene

• I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  Thank you.

  I came across the solution. In addition to download creative cloud, I needed to return to the site and download the trials for the programs I want to use - Photoshop and Lightroom. Once I did, I was in business. Save bad if this was done in light on the download site.

  Thank you