on cmd with admin rights

Similar Questions

• Change the Bitlocker pin with Admin rights

  Hi, is it possible to change the Bitlocker PIN with admin rights

  Also where that PIN is stored?

  Thanks in advance

  The answer is to write a windows service and have a program to interact with this service and have it launch the locker of bit program.

  Because the service runs under the system account, the program run by there the higher privilege.

• I have to become the administrator, BUT I install as someone else with Admin rights

  Y at - he an Admin account 'secret' that I don't see that I can become/use?

  No, I'm not being funny.  If I use my admin account, I will be always challenged to confirm some tasks such as facilities.  The dialog box that appears does not have a password that I'm already in the account, but it makes me just confirm with an OK button.  I could reduce the frequency of these confirmations by reducing the intensity of the UAC in order the user account settings control panel, user accounts, change, but it doesn't bother me if I leave UAC to the maximum power.  Of Oberwald explanation & WARNING [below] are correct - leaving UAC high helps inhibit malware.

  What what happens or something else?

  I don't know where you can get more details using Windows [accounts] otherwise than by searching this forum for the admin facilities, UAC, but there would be so many results you'd be overwhelmed.  You can try www.sevenforums.com

• Silverlight has install "Access denied" even with Admin rights

  My stream of cable asked than to uninstall and reinstall silverlight. So I uninstalled and now whenever I try to extract the downloaded .exe file to silverlight, I get a prompt message 'Access denied'. I have administrator rights and can not extract when I "run as administrator". I recently installed McAfee VirusScan Enterprise, so I don't know if this is what's blocking me. I turn off the analysis of access on, and I still get "Access denied" - help?

  Hi hmbperson,

  ·         What version of the operating system is installed on the computer?

  ·         What is the full error message?

  Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  For reference:

  How to open a file if I get an access denied message?

  How to open an encrypted file if I am seen refuse access?

• I can only run firefox with admin rights, and windows cannot find links sites. 0 x 00000002 (2) system cannot find the specified file

  I tried to install adobe, but said he can't because firefox is always on, I tried to uninstall it and download a new version, but it wouldn't let me.

  Hi Goondung,

  A. What is your default browser?
  B. do you receive this error only with firefox?

  Try to change the registry and check if it helps.

  1. go to "Start-> Run" (or press the windows key + R) and type regedit and click OK
  2. use the directory tree hierarchy to access the 'HKEY_CLASSES_ROOT\HTTP\shell\open\ddeexec '.
  3. delete the registry key 'ddeexec '.
  4. Repeat for 'HKEY_CLASSES_ROOT\HTTPS\shell\open\ddeexec' (and any other protocol that you want to solve)
  5 repeat for 'HKEY_CLASSES_ROOT\FirefoxURL\shell\open\ddeexec '.
  6. Repeat for 'HKEY_CLASSES_ROOT\FirefoxHTML\shell\open\ddeexec '.
  Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  If registry editing does not work then you can try to uninstall google add and check the status

  ·         You can also ask your question in firefox forums regarding this issue.

  ·         End the firefox process for Task Manager tab.

  http://Windows.Microsoft.com/en-us/Windows-Vista/end-a-process

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• You need permission to perform this action - field user with file rights. Please advice

  You need permission to perform this action - field user with file rights.

  I can't access folder on drive network even with domain administrator of error do 'you need permission to perform this action. "
  I would be very grateful if you could please advice, I can't change folder\files in this folder, even with admin rights.
  Thanks in advance
  Saad Ali

  Hello

  I suggest you post the same question in the Microsoft Technet forum for assistance. We have a team to help you with this guy's questions.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Run the application with the admin rights

  Hello

  I am a network administrator and I have problems with an external application. While running the application does not require local administrator rights, the software does an automatic updates check when it is launched. There are updates once a week. If the application is launched without administrator rights, the software does not check. Our users do not have local administrator rights. The result is that the application gets overwhelmed and an administrator needs to log in order to to refresh.

  Here are the solutions I've tried so far:

  1. I ran the application using the command runas , which works, but is not practical as an administrator will have to provide the password every time.

  2. change the compatibility of the application to 'RUN as administrator'. I have disabled UAC to make this work, but the user must always supply a password. I could create a locked user who cannot log on to any machine, etc, etc, but this seems like a stupid solution. I might as well give all admin rights.

  3 to research more, I tried to use RunAsSpc (http://www.robotronic.de/runasspcEn.html). This seems to work well and did exactly what I'm looking for, but created two issues: no drives mapped and an access violation when printing that I won't have to worry about troubleshooting.

  I had to give all users local administrator rights until I have a solution. Is it possible to allow the application to do its updates without granting full administrator rights to the entire system? Any recommendations?

  Yes, let the program provider to build their program cleverly.  It is not going to be a solution to this.

  Otherwise, you will need to just have someone who has admin rights not login once a week and install the necessary updates.  A bit like Microsoft Office Update (requires an administrator to do so).

• Software installation Oracle & DB creation with ADMIN No. rights!

  Dear all,
  
  I wonder for a long time, is it possible that we can install the Oracle software and create the SRD without the administrator rights on the Windows machine. ??
  
  Due to some issues of strict security, we are unable to obtain the rights of administrator of our system administration team.
  
  Oracle have all this available laptop installation? where no installation is required and simply we can decompress Oracle executable files and can create databases of data, etc.?
  
  MySQL have this type of facilities available.
  
  Please any help would be appreciated.
  
  Thank you!!

  hp_ora_dba wrote:
  It's true, I do not accept the fact that Oracle is Huuge (lots of features grouped) compared to MySQL.

  But for such requirements, Oracle should have a few exits from Lite version available, which could be treated in a very flexible way and where it should not require any Windows registry entries during installation, and any local domain user can install and use them for learning / development.

  The 'lighter' version would be XE, but even that will require an installationwith registry entries.

  Larry Ellison is to disagree with you on what "should" have Oracle. They make the full breath, Enterprise Edition free for exactly the purpose you describe. SSII not much this. I think it is much better than to worry that someone does not have on their own machine admin rights.

  Do you have a personal machine, apart from that of your employer controls? If so, why not use it? Please read http://edstevensdba.wordpress.com/category/opinion/ to see on the creation of your own personal testing system.

• Enter a share with read rights and have read/write rights

  I have a folder with my photos on my Mac. In this folder, I have all my photos in subfolders and will add new pictures once I created the share. I want to make them accessible to my family there own PC/Mac. But only with READ ONLY. My problem is that a user (account to share on my Mac) with reading rights can access my shared with read/write rights.

  I have my Mac with 10.11.2 the following users/groups:

  • (Jens) My Admin account
  • (Erika) Account sharing
  • (Family) A group

  Group of members of the family are:

  • Jens
  • Erika

  My folder permissions to "/ Volumes/ExtHD/Bilder" are:

  • Family: read
  • Jens: Read/write
  • everyone: read

  I enabled file sharing in the system settings and the 'Pictures' folder added to the share list.

  Now I go to another Mac with Yosemite, go to network in the Finder, select the computer with the share, connect to the "Erika" and open the folder "pictures". I can generate records or files, delete files, so I have read/write rights. Why?

  Finder don't show me no option 'Erika' should have rights to write to this folder. Why is she able to delete files?

  If get you information on the drive, it is the checkbox ignore verified property?

  What is the format of the disc?

• LabVIEW 7.1, Windows 7 + Admin + rights VISA

  When I use the Labview7.1 and the resources of visa with the admin rights, I have no worries. But when I switch back to the normal user rights the vi does not have any Port Com. The problem is that the it Department we does not give any admin is there a way where I can use the resources of Visa with normal user rights?

  With the new VISA-driver, it works! Thanks for your help!

• Directions to the win XP home ADMIN rights.

  Hi I'm Davie. I reinstalled win XP home on a friend's computer, everything is good, except when I try to install the dongle of vodaphone, right ADMIN denied? I can't seem to find the right ADMIN option, can help to aneyone.

  The first step is to determine if you really have the Admin rights or not.  The quick test is to right click on the button 'start '. If one of the choices in the pop-up window is "Open All Users", then you have the Admin rights.

  If you don't have administrator rights, you must log in as administrator.  On the screen, press Ctrl-Alt-Delete twice and enter in the user name box and the administrator password in the administrator password box.  If you have not assigned a password, then leave the password empty.

  If you don't have administrator rights, then the problem is most likely a problem of access to a particular directory or registry entry.  Because this could be almost anything, you should probably contact the manufacturer of your dongle and work the problem with them.

  HTH,

  JW

• How can I get back Admin rights no one has them on the computer?

  How can I get back Admin rights no one has them on the computer

  IIRC, you cannot delete the built-in account named 'Administrator', so check first to see if it's really over:

  If you have XP Pro, then press CTRL + ALT + DELETE twice at the Welcome screen

  If you have XP Home (or XP Pro), restart mode without fail (repeatedly press F8 startup just after reboot) and the administrator account must be indicated on the Welcome screen.

  Unless you have changed it, the password for the built-in Administrator account is blank (no password).

  Once you sign in as an administrator, go to control panel > users and create a new account with administrative privileges (or give these rights to an account existing).  Do not use the built-in for common daily tasks administrator account.

• Installation of program to ask for admin rights and I am logged as administrator? What's wrong!

  Then try to install a printer to my system HP Vista says he needs admin rights?

  As follows:

  This software cannot be installed using the command "run under...". ». The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. Sign out and then sign in as a user with administrator privileges. (Contact your system administrator for more information.) If there is no system administrator, ask the primary user of this computer installation software. Restart the installation by removing and re - insert the installation CD.

  Hello

  Method 1:

  I suggest you open the user account control and check if it helps:

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: Make sure that return you what UAC on once the problem is corrected.

  Method 2:

  This problem may also come from damaged user account that so I suggest to create a new user account and check if the problem persists.

  See the link below for more information on the setting of a corrupted user account.

   http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this helps,

• Unable to gain admin rights and cannot do a restore

  I've lost my admin to the standard rights. I tried to restore the computer in safe mode. I can't do anything at all because he says that I don't have the admin rights and communicate with my admin due to group policy. I was looking for things to the top and it doesn't let me do anything group policy and admin rights are gone. Also it does not let me start repair system or restore on a windows CD. This is to try to use the right windows installation cd. Any help will be appreciated. I thought to do a repair or restore I only need a windows installation cd and it does not matter what version it was.

  Each installation of Windows has an active admin account at the beginning. You can't avoid it. What happened to yours?

  You can easily run system restore using system repair your CD to start the machine in Repair Mode. No password is required.

  When you're done, plan ahead a little and create, test and document a spare, even admin account that you have a spare House key. This will save you a lot of trouble.

• Windows 7 says I can't uninstall a program because I don't have the admin rights, but I am the only user

  Windows 7 says that I can't uninstall a program because I don't have the admin rights, but I am the only user on this computer and I am logged on as administrator.

  Please ignore the lectures about how I'm not supposed to use the machine as admin all the time and help me solve the problem. :)

  Hi EnergyIntell,

  -Uninstall on what program are you facing this problem?

  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

  I suggest you check if you're facing the same question in an administrator account account / new user.

                                  

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not facing the same problem in a new user account, it is understood that the user account is damaged. You can check the link below and use the steps provided in difficulty a user account is damaged.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile