On connection WLAN Equium A100-337 security screen is not displayed correctly

My use of the computer to automatically connect to a specific WLAN without any problem. However, now, when trying to connect to the same network, security touch screen I am presented with is not of the correct type. Instead of two lines of encryption there is one. When I enter the password, I get a message saying I'm connected to the network but cannot access the Internet. The wireless router works fine.

I have to reset something on my computer or change a setting?

Hello

May I ask what wireless configuration tool do you use?
Have you tried to update or reconfigure the WiFi profile on the router and the laptop?
Try this. Disable encryption on the router and try to connect without security settings. If it works, you can set encryption return parameters.
You can also try reinstalling the WLan driver.

By the way; did you use the firewall? Active firewall sometimes could is a bad influence on the internet or WLan connectivity.

Tags: Toshiba

Similar Questions

  • Failed to connect on Equium A100-337

    I have a laptop Satellite A100-337. When I enter the password to log on to the computer I get the message "the service user profile Service has no logon. Unable to load the user profile.

    I put t know what operating system you use, but first check out this article from Microsoft - http://support.microsoft.com/kb/947215

    By the way: when you see this message you can enter the OS?
    You can start in safe mode?

  • Equium A100-147 - sound devices do not work correctly

    I've owned an Equium A100-147 for only less than a year.

    The problem I have is that if I put pressure on the area around the left speaker (where is the VGA port) there is a substantial "cracking" / rattling noise. The right does not exhibit this problem.

    The other day with a same case design (model Satellite A), I got another PC Toshiba laptop and it seems to have a slightly stiffer construction quality.

    Is it worth getting it checked under warranty while I still have the warranty? Or am I just too picky?

    See you soon

    Interestingly enough, why you support on the area around the speakers. As far as I know the speakers are placed between the keyboard and display and keyboard there is no pressure to the speakers. Very strange method to test the functionality of the laptop! ;)

    In any case, you should contact the service because the speaker should be placed and fixed correctly.

  • 3G Dongle on Equium A100-337

    3 network dongle on Tosh Q.
    3Connectez, (3 software) shows that the dongle connects to 3 network. BUT not connecting not on this laptop, the dongle works fine on my other laptop.
    If the dongle is ok.
    Laptop says, unable to connect. etc you want to try again? Try again. Even.
    uninstalled reinstalled etc etc etc. Tried other usb ports, etc..
    Initially, tosh sees the mass storage device, ITU ok has a program on this subject, so it is. He then sees as modem, tried updating drivers etc of the dongle. does not work. Am I missing something?
    Dongle is a ZTE MF112
    Any help.

    Details of Tosh
    Model is Equium A100 337
    Had all the details last night it's portable wifes

  • Where can I download Vista for my Equium A100-337 utilities

    OK, I bought a new laptop last week a satellite A100-337, everything works well, but because that since I already had vista ultimate and some alphas, I tried to install allongside vista I had to reformat.

    So ive just got up and run again, but ive lost all toshiba utilities and drivers for the controller audio touchpad and wlan etc.

    Can someone tell me where I can download?

    Hello

    Equium A100-337 is a form of unit PSAAQE series. Am I wrong? The serial number, which you will find at the bottom of the unit.

    On the official European site of Toshiba, unfortunately, I have not found this series.
    http://PC-support.Toshiba-Europe.com/Vista/

    You will wait a bit for compatible Vista drivers or you try to install other series A100 only Vista drivers.
    You could also test drivers from the Satellite A100 because laptops are very similar

  • Equium A100-337: poor performance Vista - should I upgrade to XP?

    I have a brand new Equium A100-337, which came with Vista as standard.

    No games work correctly (yes I tried the emulator). The noise is terrible and DVDs are almost inaudible. The firewall stops or crashes constantly. Now, I get the message that Toshiba flash cards do not work - I don't even know what they are!

    Is this normal?
    Installing XP would solve my problems?

    Hello

    What is a RAM upgrade. In line with this model of laptop comes with 512 MB of RAM. Very interesting, is that this graphics card is shared and use RAM for graphics operations. I imagine that the performance is not one that suits.

    This model laptop can handle with 4 GB of RAM and I recommend you increase the RAM with 1 extra GB module.

    I'm sure that the performance will be much better. 512 MB for me is certainly not enough. It is the same with Windows XP Home edition when the unit only has 256 MB of RAM.

    Good bye

  • Equium A100-337: what model should I choose Download drivers?

    Hello

    can someone tell me what set of drivers to choose for the model A100-337 when I get to the drop-down list that gives me the choice between PSAA4 or PSAAB?
    Lie, I want to download the most up-to-date versions.

    Hello

    The serial number of the Equium A100-337 begins with PSAAQE.
    You can find the number at the bottom of the unit
    I put t know why your laptop model is not listed in pilot form, but you can see other drivers for PSAA4 and PSAAB.

    Perhaps the only drivers will run.

  • Satellite M30X-111 screen does not display anything but the external monitor works

    My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

    Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

    How can I solve this problem?

    What do you do? You want to recover the laptop?
    If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

    But this question seems that you have accidentally switched to external display.
    I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

  • Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

    Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

    Hello JPMain,

    Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

    I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

    Restart your iPhone, iPad or iPod touch

    If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

    The backup of your iPhone, iPad and iPod touch

    Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

    Have a great day!

  • Qosmio X 870 and Windows update 8.1 - secure-Boot is not configured correctly

    After update of windows 8 for windows 8.1 a watermark appeared in the dekstop who says:
    + Windows 8.1 secure Boot is not configured correctly build 9600. +

    Is something wrong with the installation of the update?

    Thank you much in advance.

    I have a Qosmio x-870.

    If you see a message "Secure startup is not configured properly" in the lower right corner of the office, this means that Secure Boot is off or has not been configured correctly on the PC.

    Secure boot can be enabled or disabled in the BIOS.
    You need to access the BIOS and should allow secure boot.
    Save the changes and restart the device.

    Your comments would be appreciated

  • When I run the app the opening screen of the application is its double a is not displayed correctly.

    Original title:

    The window server

    Hi all

    I recently installed an application on my Remote Desktop server.
    The result is that when I logged on and launch the application from the opening screen of the application is its double a is not displayed correctly.
    Can help
    Server is 2008-r2
    The client is windows 7 rdp 7.1
    Thank you

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • My screen does not work correctly.

    My screen does not work correctly.  Yesterday, it was OK, but when I turned on it today it has a white bar on the side left which effectively blocks on the right side of the screen.  When a dialog box is moved to the left, it goes behind the empty bar and is obscured.  How can I rectify this?

    I have a monitor of edge 10.

    Try your monitor on another computer, or borrow a monitor to try on your computer.  That should narrow down where the problem is quite quickly.

    "LiamMc Kinney" has written in the new message: * e-mail address is removed from the privacy... *

    My screen does not work correctly.  Yesterday, it was OK, but when I turned on it today it has a white bar on the side left which effectively blocks on the right side of the screen.  When a dialog box is moved to the left, it goes behind the empty bar and is obscured.  How can I rectify this?

    I have a monitor of edge 10.

    http://answers.Microsoft.com/message/06f039dc-a1fb-4466-8ee9-aa276bb48ecb
    Meta tags: hardware; windows_vista

    Monday 2 April 2012 19:59:11 + 0000: CreateMessage LiamMc Kinney

  • Mobile profiles (phone and Tablet) screen does not display does not correctly

    RoboHelp 11 on a Windows 7 machine

    I have a small project that I asked in August and just pick it up again today. The only changes that I made today have a background color in the selected schema and adding browsers to the Profiles screen (mobile phone, desktop),. I also changed the pixel size of screen above and saved profiles, but eventually changed his mind and changed their return. I don't know if it would make any difference to this problem. (When I did size changes HR told me to update media queries, but I do not use all... or at least none came in functionality to handle media queries.)

    Then I re-generated output, but the Tablet and phone screen sizes are does not display correctly when I tested it by changing the size of my browser - there is a browser size quite large "dead zone" where no content is displayed at all (which almost makes appear as the 'sensible' part of the output does not work), inland navigation (front and rear bar and buttons) is pushed upwards in the header bar , and no horizontal browser scroll bar appears so that I can scroll to see the edge of the large images. I mainly use IE but it happened as well as Firefox and Chrome. The desktop display seems to work very well. (I'm sorry I have no screenshots now - I can provide some if necessary.)

    I was wondering if it had something to do with my chosen 'model' but a new project that uses that even a (Theme1_Standard) had no problem. Now, I also noticed that the model seems to have changed since I was last in Robohelp, because the overview of model unchanged today was not the same as the model from August. The Readme file for the latest patch does not mention everything that I thought that seemed to be related.

    As I said, I changed were all one color, browsers display profile and the profile screen sizes which I subsequently put discarded. I'm completely at a loss as to what caused this and how to fix it. I feel like an OAF comprehensive because it seems to be related to something I * DID * but back on my steps gave nothing.

    Thank you!

    UPDATE

    Still having this problem, but in poking around I discovered that some of the program files on my local machine have been updated in mid-September (when it looks like ReadMe file in the last patch was installed on my computer) and others have been updated mid-October (the first time I was in HR since mid-August, so anything is a not then generate). I don't know if this means anything, but to me it seems slightly suspicious. THX.

    I tried to reproduce the problem, but I can't get the the problem you describe. I do not have a dead zone and wide content scroll correctly.

    The screenshots are pointing to the former route Theme1, so there may be a problem here. Can you please try the following:

    • Delete the layout of your project.
    • In Windows Explorer, navigate to the folder! ScreenLayout! in your RoboHelp project and delete the Theme1 folder.
    • Claire the! SSL! folder.
    • Clear the DPC.
    • Remove the output that you previously generated to ensure that no old file remains.
    • Open RoboHelp, add the layout and generate without making any changes? It's working now?

    Just to be on the safe side, Adobe has released a fix for HR 11.0.3 that some sensitive issues in layouts, however not correct the issues identified in this thread: questions in RoboHelp 11.0.3

    Kind regards

    Willam

  • Home screen does not display on startup with English version?

    Home screen does not display on startup with English version

    Looks like you're one of these creative cloud customers who do not have access to the Welcome screen.

    Excerpt from the article: troubleshoot home screen in Photoshop

    Welcome screen does not appear

    The home screen is not visible for a subset of creative cloud paid and trial customers. All content learning in the Welcome screen is available with CC learn on Adobe.com:https://helpx.adobe.com/photoshop/tutorials.html

    The Welcome screen also does not display if you have something other than the English game for the language of your UI in Photoshop.

    ~ David

  • How to connect my Equium A100 to the TV?

    Help...
    I'm not very good with all this tech stuff... my age I think! ........... I'm trying to connect my Panasonic TV to my PC with a VGA cable, but get a message "No Signal" on my TV... I was told to try a ' video cable, but why then I have a VGA port?
    All I want to do is look at things on my TV from my PC... Any help out there please, would be welcome.,. My laptop is an Equium A100...

    Your TV's VGA port?

    VGA port is mainly used for external screens.
    To the TV, you can use S-video cable. When you connect your laptop to the TV allow certain channels and port on your TV.

    Please note: both connections will transfer the video signal only.

Maybe you are looking for

  • Question about module memory for Satellite M100-221?

    This module will work correctly: ASC 2 667 512 MB DDR SODIMM512 MBDDR2 SO-DIMM5300 MB/s667 Mhz

  • Extending Wi - Fi of the TC airport with extreme

    Had to update the last time Capsule. Airport extreme as an extension of our network Wi - Fi here at the farm. Extreme base station is more recognized by TC base station. How can I reset extreme to talk to TC? Bruce

  • WXP MCE can't see USB DVB - T on Satellite P100-429

    I installed a tosiba DVB - T usb adapter and it works very well with the standard XP but when I start MCE, it cannot identify the TV adapter. Has anyone ideas or is just beyond its capabilities? If so why is it sold as an accessory for an MCE machine

  • Satellite L670 - 1 H 9 - accidents down when e.g. to open a video on youtube

    * Problem: * I bought a new Satellite L670 - 1 H 9, a few weeks ago and I have problem from the beginning: when I open a video on youtube, my laptop freezes and 2 seconds later, the screen is black and a PT noise is audible. I can't do anything but c

  • Best processor for my hpe-112y

    OK so I got my card I got my diet now I need a better cpu recital 2 of im heres http://products.AMD.com/en-us/DesktopCPUDetail.aspx?ID=534 http://products.AMD.com/en-us/DesktopCPUDetail.aspx?ID=591 & f1 = f2 = & f3 = & = f4 & f5 = & = f6 & f7 = & f8