On D110A default print settings

Similar Questions

• change the default print settings

  I want to change the print settings by default on Firefox 6.0.2 such as headres, footers, etc. are not printed when I print a web page.

  Firefox button > print-> Page Setup

• How to change the default print settings

  My settings print continues to change 50% print size.  How to set the default value to 100%?

  Hello Bill,

  Thank you for using communities of Apple Support.

  It seems that what you want to do is to save your settings as a preset favorite. Not exactly define value by default, but easier than manually make changes every time you print. Take a look at this article to find out how that is done.

  OS X El Capitan: save your print settings to use later

• DEFAULT PRINTER SETTINGS

  Hi, I really hope that someone can help me.  I'm certainly not very informed on this stuff, but I know that I don't have this problem before updating my computer on Windows 8.1.  I do a lot of type of printing project before printing a finished product.  Then... I changed my settings to default print for "Black ink only" and "draft".  However, every time I start to print in MSWORD, MSEXCEL, MSPOWERPOINT; in fact one of my software applications, properties do not reflect the default settings I applied using Tune or when you access the printer through my control panel. I see that when I access the device, I show 2 printers to choose; both are the HP Officejet Pro 8600 premium but cited "USB", and the other quote 'Network' (of course, I do understand that either).  It's the 'Network' printer that will not save the changes.  If I am making any sense, can someone please help me?  I'll be very grateful.  Thanking you in advance, IM4GLTR1

  IM4GLTR1

  Your printer is connected via a USB cable from your computer to the printer?  Or... is it connected wireless to your router?

  Sounds like you or someone else have configured the printer to do both.  Select the correct printer in the control panel that reflects your configuration.  Try now.

• return to the default print settings

  How can I prevent the print settings to return to the default settings after printing 1 envelope? I just got a new brother laser printer and it prints fine for normal size letter paper.  However, when I set the printing options for 100 envelopes, it prints 1 and stops, and the printing options began to default settings.  Brother service technicians say that it is a problem of microsoft.  Any ideas would be appreciated.

  The service Tech brother would say that he/she saved having them nothing to do.

  If you have installed the brother according to the brother by using their full features software, what/how the printer, its output product is down to the brother Software, not earned.

  Although I suspect you can do a mail merge, in which case the program / the fusion method and direct mail can have an impact

• On photosmart C410a default print settings

  I want to put the default value of the print on a black PhotoSmart C410a only settings. How can I do this?

  OK, when you start a print job in the window that appears before you print, make sure that the arrow next to the name of the printer is oriented upward.  If this is not the case, click it.

  Now, in the Presets Select plain paper, Fast Draft, black and white.  This will 'stick' until the next time that you choose.

  If you're wondering how to disable completely the use of color ink, it's a totally different subject...

• HP OfficeJet Pro 8600 Plus change the default print settings.

  I would like to change the default settings for printing to the project and in grayscale. Is there anyway to do then do not forget to do the changes for each printed page?

  Using Windows XP OS.

  Thank you in advance.

  Hello AllAmerican1347

  If you go to the control panel and printers and fax machines, you should see the printer there. Right-click on the printer and select Properties. If you define the settings here, it should be the global default.

  Tip If you want to print ink black only some printers require that you select black ink only after choosing grayscale.

• Photosmart 7520: How to remove the default print on PS7520 settings

  I recently had a problem with a default setting of 2 copies. Can I change to 1 copy by simply changing the number 2 to 1. The next ime I just print a similar document, the default setting is back to 2 copies and I cannot remember how to remove the default settings.

  Any help will be appreciated.

  -Joe

  Hi @JoeAldrich,

  Welcome to the community of HP,

  I understand that you are having problems with the settings on your Photosmart 7520. I'll be happy to help you.

  Below, I've posted links of couple to some documents that should help you to solve this problem. Please read the documents carefully and let me know if your problem is solved.

  Printers HP Photosmart 7520 - copying Documents.

  Printers HP Photosmart 7520 - change default print settings

  If you still experience the problem, I would recommend trying to restore the default settings.

  Go to configuration > tools > restore default settings

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Change default printing shortcuts

  I want to change the default print shortcut.  He is currently assigned to "general printing every day."  I would like to change it to "Fast/Economical hologram."  When I go into preferences, tab shortcuts Printing and click "Fast/economical printing" there is no option for this do the default shortcut.  When I click on 'General Impression-' every day, change the features to resemble fast printing & economical, it will allow not to store the news under a new name, but not by default.

  I have an all-in-one J6480

  Message edited by Holmanranch on 03/21/2009 10:04
  Message edited by Holmanranch on 03/21/2009 10:04

  I encountered the same problem with my HP F4280 All in one and figured out what the problem was.  I am using Windows 7 then the following steps work for this OS well its probably similar for Vista users.

  Click the Pearl icon (Start), and then click devices and printers

  Double-click your printer icon to open the HP Center

  Under Printer Actions, click on customize it your printer link

  Click the Advanced tab

  Click on the button to default print (lower-left)

  If you haven't already done so, create a custom shortcut in changing one of the default settings of HP and then choose Save as

  Choose your shortcut in the list, and then press the button apply

  Press OK and you get back to the center of HP

  Close the center of HP (X in the upper right corner)

  However, this is where I ran into problems... If the program you are printing from is currently open (Photoshop in my case) the default print settings will NOT change until you restart the program. Restart your program (Web browser, Photoshop, paint etc) and now your default print settings should be updated to use your custom default shortcut.

  I hope this will help some of you who have had problems.

• Define the print settings defaiult on Photosmart C309 using Mac

  When I installed the Photosmart C309 software on my Mac, I noticed that the HP Solution Center does not appear.  I used to use a pc, so I was familiar with the Solution Center.  I tried to reinstall the software, but still no Solution Center.  It seems that without it, I have no way to set the default print settings.  Does anyone have a solution (pun intended!) for this?

  OK, thanks for that.  default 10.8 work this way - for all applications which you print, your Mac, remembers the mode in which it last impression.  There is no universal default, for example.

  Try it and see if it behaves in this way.

• HP 88620 all-in-One: printer settings HP 8620

  Hello

  My Hp8620 works perfectly until yesterday.

  When you print a document (.pdf, .doc, .xls, even from firefox), for example, the default print settings are automatically set to horizontal and the paper format is 'other' for when I feel that it displays on the part of the text.

  I have re-installed, but this did not solve the problem.  I can of course put manully and set the settings to use the ones from last time, but this isn't the goal and the printer should work for everyone in the House.

  Would be great if anyone could offer any help with this problem.

  BR
  Dominik

  Hey @rallydriv3r,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OS x 10.10 machine printing to your Officejet 8620 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If your printer is connected to your Mac via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click on your Apple icon, system preferences and printers and Scanners.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.

  Now, if you removed the USB cable, plug it. Otherwise:

  1. Click the 'more' in the lower left corner.
  2. Select your printer from the list.
  3. Click on the box to use and select your printer from the list.
  4. Click on Add.

  Please let me know the results after following the above. If you can print successfully, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Printers HP Envy 5660: default printer of ink settinga

  I've just set up a new printer HP Envy 5660.  The default ink setting is color.  I want the setting of default to be black ink.  How do I do that?

  Hello @f_z , welcome to the forums.

  I saw your question about wanting to change your setting to print in color, print in black. You must select the option to print in black ink only in the driver of the printer itself.

  Visit this link to help you the title of 'Change the default for all print jobs print settings':

  Changing the settings to print in Windows 7

  I hope that helps!

  Happy Monday

• Changing the settings to default print with CUPS still does not work, regardless of the application

  Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

  Finally I got it solved!

  There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

  So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

  Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

• I switch to Chrome because of problems with default printer. When can I expect this issue for a long time or my switch will be permanent?

  Whenever I change a print setting, firefox that shows the default setting. For example, I want to print a document in landscape, and now all my documents print in landscape unless I have reset firefox or I might want to print only once another printer, but now, this printer is enabled in my default printer. It is a huge pain and I got tired to reset firefox several times a day.

  I love everything about firefox, but this issue me leave.

  Please solve this problem which is the infestation of users of firefox for years! And let me know when you do.

  Thank you!

  By default, Firefox to save a setting like the new "default". You can change it to not save the settings by enabling / disabling this pref in Subject: config.

  by default Print.save_print_settings is true : double-click to switch to false.

  http://KB.mozillazine.org/about:config

• default print to 4 copies

  I'm purolator printing labels and somehow the default copies has past to 4

  Hi popinski,.
  You can change this in your print settings. Open the print dialog. Under "Presets", select 'View the Presets' and you can change the default profile here.
  Or try to reset the print settings stored in Firefox here:

  • Correction of the printing problems in Firefox