On my desk, all file associations have changed & all extensions have become ".lnk" instead of ".exe". So I can't run any program without going through 'my computer '.

Similar Questions

• "all my files in Windows xp have become"lnk"speed of: exe. I can't run any program

  I change my hardware and activate my software, I did. Now my files on my desktop and start menu became "lnk" instead of "exe" and I can't run any of my programs.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if the problems caused by the virus.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 3:

   

  If the problem persists, you can try the system restore and check if it helps.

   

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• I have the problem that my pc does not run the program or we can dosent run any program and always give environment problem so now what should I do?

  I m using windows 7 ultimate service pack 1

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
  Open default programs by clicking the Start button, click default programs.
  Associate a type of file or Protocol with a program / scroll down the list until you find
  your (.xxx) file extension you want to associate with your application.

  There is also the Microsoft Fix it Solution Center
  http://support.Microsoft.com/FixIt

  Also: Microsoft Fix it Solution Center
  http://support.Microsoft.com/GP/cp_fixit_main/en-us#TAB8

  In the list on the left, click on the "Windows" tab and then on the right road to the bottom of the list until see you if your problem is listed.

  J W Stuart: http://www.pagestart.com

• All my file associations are changed to .lnk

  All my file associations are changed to .lnk what can be done to restore it?

  Try the thing below

  Step 1: open the command-online Start-> Run-> command prompt.
  Step 2: Go to the C:\ and type the following command as shown below one by one.
  Assoc.exe = exefile
  ftype exefile = "%1" % *.
  Assoc.lnk = LNKFILE
  ftype lnkfile = "%1" % *.
  After running the command, you will have no problem with the .lnk and .exe file.
  For more information, see http://tweaksformypc.blogspot.in/search/label/FileAssociation

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• To transfer my files, some have been modified to WPS and now I can not open them. What is?

  Original title: WPS

  They gave me a new laptop for Christmas, to transfer my files, some have been modified to WPS and now I can not open them. I am moderately OK on the computer and told to convert the files to something else... OK?  What?  How? If you can help please, I'd appreciate it.  They are important files for me. Thank you.

  Hello

  . WPS files can be opened with Microsoft Works, Microsoft Word, Word Viewer, or can be converted
  other formats.

  . WPS file extension
  http://www.FileInfo.com/extension/WPS

  How to open a WPS file
  http://www.online-tech-tips.com/MS-Office-Tips/open-wps-file/

  Microsoft Word Viewer
  http://www.Microsoft.com/download/en/details.aspx?ID=4

  ZamZar - free - convert wps (Microsoft Works) files to doc, odt, txt, and pdf
  http://blog.Zamzar.com/2007/04/23/convert-WPS-Microsoft-Works-files-to-doc-ODT-txt-and-PDF/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I change a shortcut to a file without going through the file available any longer?

  Can someone help me change a shortcut to a file without going through the file available any longer?  I saved pictures of my camera on accident as a shortcut and then deleted from the camera until I realize it.

  Original title: Ooooppps!  Save my photos as a shortcut and then deleted without getting camera.

  Can someone help me change a shortcut to a file without going through the file available any longer?  I saved pictures of my camera on accident as a shortcut and then deleted from the camera until I realize it.

  ==============================================
  The shortcuts will not be useful if the original files are deleted.

  There is a chance that you can recover the deleted files from memory
  card with the following free software:

  Recuva - file recovery
  http://www.Recuva.com/

  Recovering files lost with Recuva
  http://www.vista4beginners.com/Recuva

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 arrives

  I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 comes up... all clues?

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. you try to add a network printer?

  3. What is the full and exact error message?

  4. when exactly you get the error message?

  5. What is the number of brand and model of the printer you are trying to connect?

  Method 1:

  I suggest you check out the link and try sharing the printer:

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2:

  Check out the links and check if that helps:

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

• How can I run a program with win xp have a restricted user account type in the title of windows 2003 Server domain controller?

  Dear all,

  I have a windows 2003 server and I have a domain controlor.

  I have win xp use in this field, the account type for these users are not administrator users and restricted users.

  When I need to install a program in any of these workstations, I need to disconnect the user restucted and the journal as an administrator user.  When installation is finished, I can run this program from the administrator user but when I closing session and connection for users user restruct I can not run this program and an error.

  My question is: How can I use this program with the user of gods?

  Thank you

  You would be better that tag on your workstation
  Windows Server - how to configure the group policy in windows server 2003 to remove the start in the start menu to xp pro user Expert MowGreen Windows IT Pro - consumer safety

• Is it possible to have automatic display without going through the iPad also require the word to reactivate?

  Is it possible to have automatic display without going through the iPad also require the word to reactivate?

  While at home, there is no reason to have the password, but I want the device to sleep to save battery when I put aside.

  You should be able to have the settings > general > Autolock set for a time while having parameters > Passcode > Passcode turn off - you'll still have to "slide to unlock", but not to enter a password

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• .exe error] is not found the procedure entry point AddAtomW Entry Point not found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I have

  Original title: [ProgramName] .exe Entry Point not found

  I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!

  Hello

  1. did you of recent changes on the computer?

  Method 1:
   
  It is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you put the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  See the link below to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (a) click Start, type msconfig in the search box and press ENTER.
  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  (c) under the general tab, click the Normal startup option, and then click OK.
  (d) when you are prompted to restart the computer, click on restart.

  Method 2:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I have can´t run the program after you install with creative cloud

  Hello!

  I have can´t run the program after you install with creative cloud, he do not appear the button to open it, but the status is installed, someonepeut help me with?

  Can you tell me what operating system you are using (windows/Mac) and some data on your computer (RAM, card graph, 64 or 32 bit,...)?

• Cannot start applications. I have "set up side by side" when I try to run any application.

  I'm helping a friend fix his computer. He reports that, after restarting a auto update, if it tries to launch any application, it gets this error:

  "The application failed to start because it side-by-side configuration is incorrect." Check the log of events applications for more details"

  I checked. Attempting to run desktop applications will generate this error. However, I can launch the Control Panel, Windows Explorer (not Internet Explorer) and another at the level of the system features (the command line).

  It seems that the C++ Redistributable packages have been damaged on his machine, so I downloaded the file vcredist_x86.exe Redistributable 2005 and 2008. Unfortunately, I can not run these files on his machine. You try to run generates them the same error generated by other applications.

  I also tried to run the repair of a Vista feature install disk but that also causes the same error.

  Can anyone suggest what to do here? I include below the exact text of the event log.

  The activation context creation failed for 'Context by default in the system'. Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.windows.c... - controls.resources_6595b64144ccf1df_5.82.6001.18000_en - us_9e72cfd97d4d7bf2.manifest" at line 0. Invalid Xml syntax.

  I looked at this file. It's an XML that is formatted incorrectly. But I don't know how to fix it, or how to get a new copy of it. Any advice would be really appreciated.

  The activation context creation failed for 'Context by default in the system'. Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.windows.c... - controls.resources_6595b64144ccf1df_5.82.6001.18000_en - us_9e72cfd97d4d7bf2.manifest" at line 0. Invalid Xml syntax.

  I looked at this file. It's an XML that is formatted incorrectly. But I don't know how to fix it, or how to get a new copy of it. Any advice would be really appreciated.

  Go to the command (cmd.exe) prompt with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  He is able to find and repair broken files? If this is not the case, replace the manifesto by the file of your DVD [3].

  Best regards
  André

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token [1]
  [2] http://support.microsoft.com/kb/929833
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/ [3]
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• exe files will not run any programs downloaded recently is not working, error windows can't find the app

  to start windows once the password inserted tab windows process error oxcooooo7b error, I can't access msconfig or regedit nothing extends box run same mistakes for new programs

  c:\windows\system32\msconfig.exe the procedure could not be found, some programs in place same tab all recent programs that I downloaded, I get the same error

  Windows 7 ultimate

  8 GB ram

  desktop PC

  any help app thank you

  Hi Neil,

  Thanks for the reply.

  I suggest going through the article and follow the steps.

  Cannot open. Files EXE in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2688326

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry )

  How to back up and restore the registry in Windows.

  It will be useful. Get back to us with the results.