On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Windows Update and System Restore does not work after that the virus

    I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

    Hi TedDanson,

    1. do you get an error message when you try to run the restore system or Windows updates?

    I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

    Microsoft safety scanner

    I hope this helps.

  • Re: L505 does not work after replacing the screen

    I had to replace the display screen on my Satellite L505 due to the 'accident '. After finding how to get instructions on the line, I was able to do the job, seemed ok, but it having moved up the screen on, but nothing else. When replacing at any time I felt an electric shock, so I do not think that the fried motherboard. He would have anyway? If this isn't the case, motherboard, would this inverter replacement needs. The accident was due to a piece of hardware that was sitting on the keyboard when my dog (the awkward beast) sat down on my satellite (I used it in his bed), the screen cracking. Help would be appreciated knowing what it could be.
    Thank you

    Hello

    I don't think that someone will help you in this forum. Who knows what happened... You must contact the Asp (SAV). Please, please understand me, it's hardware related problem that needs to be diagnosed by special service tools.

  • 8 app Windows do not work after that a Windows Update has been applied

    Hi, I installed windows 8 this morning and everything worked. Then it applies updates and now none of the applications really work, instead I just get a white screen and app store just gets stuck while loading. Any suggestions?

    Thanks Scott

    Hi thanks for all that. It seems it was my Kaspersky Internet Security 2013... Uninstalled and reinstalled and now everything works

    Thank you very much
    Scott

  • My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

    My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
    Although of course, the CD-ROM drive worked during the upgrade.
    I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
    PXE - E6i:Media Test Failure, Check Cable
    PXE - MOF: Exit PXE Rom
    During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
    Can someone help me please?
    Best regards
    John

    Besides what abdelhak says:

    The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

    Hope this helps,

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Keyboard does not. Able to use for the connection does not work after that.

    The keyboard works to connect. But does not work after that.

    Hello Sml15,

    The embedded screen keyboard should still work even if the physical keyboard isn't.

    Try this first...

    Press and hold the Windows key and the space bar.

    If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

    In the window of the ease of access to the keyboard, disable FilterKeys.

    If all goes well, which will fix the problem.

    Let me know how it turns out.

  • Tecra M7: Tablet does not work after closing the lid

    Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

    Does not happen on hibernate or sleep.
    I have the set cover to do nothing on close.

    Hello

    What do you with Tablet does not work after closing the lid?
    Is - what the laptop freezes or what? What happens exactly?

    Closing the parameters adjustable lid to Hibernate or standby mode or no action.
    These settings can be defined in configuration power saver actions.

    If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

    Best regards

  • Update of Vista 32 bit does not work after replacing the hard drive

    A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

    I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

    • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
    • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
    • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
    • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

    Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

    So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

    ARG, apologies.

    Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

    The fact that you have not already installed TSRI is exactly your problem.

    Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

    If the installed hard disk driver currently is not compatible with this specification,

    It will result in oddities like the status of the service Windows Update is not recognized correctly.

    Installation TSRI will fix this in most cases.

    Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

    Since you are already updated to SP2, we will see if it is a viable solution.

    Go to: start-> Control Panel-> programs-> programs and features

    In the list of installed programs, locate and remove if found.

    -Intel Matrix Storage Manager

    -Intel Turbo Memory

    This should force your computer to go back to the real driver provided by Vista.

  • APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

    APEX 5.

    Dynamic action for the CHANGE event does not work after applying the filter on IR.

    Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

    Real action

    Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

    Is TI WHEREAS behavior?

    I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

    Concerning

    mdyla

    mdyla wrote:

    It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

    Set the dynamic scope of the event action to Dynamics.

  • Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

    Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

    the printer is not the shades of grey even print cartridge is not yet empty

    y at - it software for hauler color printing?

    Thanks for your comments

    Hello Nilsvolkel,

    Thanks for the reply.

    I'm sorry for the late reply.

    I appreciate your patience and time.

    Do not require any special software.

    However, you can use the steps in the following articles and check.
    Reference:
    http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

    http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

    Please keep us informed.

    Thank you

  • Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

    Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

    Hello

    Try the following.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

    Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

    When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

    Kind regards

    DP - K

  • 350 laptop G1: Touchpad does not work after open the cover.

    Whenever I close the lid, when I open again the touchpad does not work.

    I have to restart or put the computer to sleep in order until the beginning of touchpad working again.

    I solved my problem!

    I have unistaled the driver PS/2 Synapatics 19.0.12.95

    Thouch pad suite to work without the driver and now I finally can close the lid and open it again and use the touch pad immediately.

  • HARD does not work after changing the disk partitions recovery media creator

    Hello world

    After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

    Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
    I got in the OEM recovery partition.
    I am also able to create a recovery using the Windows tool unit.
    You have no idea about it?

    Thank you very much!

    Hello

    Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

    Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

    Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

    I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

    If you have any other questions you are welcome.

  • Y700 - Dolby Audio does not work after resetting the system

    After resetting my computer to factory settings, audio dolby does not work. This is the error message I get:

    "Your installation is missing components. Reinstall the audio driver or the stand-alone components available on the support site for the manufacturer of your PC. »

    His works on my computer, just not this request.

    Thanks for the help.

    Matt

    I have the same problem, I have a 70-Z40 and the Dolby Digital Plus open, but does not work, you can choose the profile but is not even, I have this problem after the last windows 10 updated a few days ago.

    I hope you can help, thanks in advance

    EDIT: I solved it after a few tries, I don't know if it is the best way, but it's how I solve this problem:

    (1) Delete last windows update (after that, it did not)

    (2) delete the sound driver from Device Manager and reboot (it did not)

    (3) download the driver for my lenovo model page and install it (it did not)

    (4) any uninstall Conexant audio and Dolby of my computer and re - install again (it does not), it seems that my dolby 7.6.4.9 driver version is not correct, I need the 7.5.1.1

    (5) again to uninstall everything and restart

    -From there, he solved my problem

    (6) go on my computer (my system is in Spanish, so I don't know the correct name for the version in English, sorry) and then go to the Lenovo partition, then open drivers > Audio > Setup.exe This will install your Conexant audio driver, and then restart.

    (7) after you restart your laptor, do the same thing... Lenovo > drivers > Audio > DolbyGUI > x 64 > DolbyDigitalPlusHT.msi, and then restart your computer and it should work fine.

    Sorry for my English.

    See you soon

  • Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

    I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

    Please would you give me help? I really appreciate!

    Thank you very much.

    Eleanor

    A prompt by right clicking and select "Run as Administrator"
    and then at the command prompt, type: chkdsk /f r, then press the Enter key.

    If you are asked to plan the volumn to check the next time that the system restarts,
    Enter: y

    If you know the manufacturing of your hard drive you can also download their diagnostic software.

    Another use: SpeedFan has an online health analysis function
    (SMART tab) for hard drives. It will show how your disks
    compared with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    ========================================================================

    Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

    Click on start / all programs/accessories then
    Right-click on the command prompt option and select "Run as Administrator".
    (or "Safe Mode" open a command prompt)
    At the command prompt, enter: SFC/scannow

    Windows 7 - order SCANNOW SFC - System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
    http://support.Microsoft.com/kb/928228

    J W Stuart: http://www.pagestart.com

Maybe you are looking for

  • Safari will not open a new window or respond to a google search link.

    I am running OSX El Capitan and I have problems with Safari. Let me give you a blow by blow account of my problem to avoid any misunderstanding. I open Safari to my google homepage and type a question of research such as: "why I have problems with Sa

  • VAIO gate install failure

    I tried to upgrade my VPCEB390X with the release of the update of the VAIO gate (2010-11) and the installation does not work. At this point, VAIO gate works as well. When I try to reinstall the original (as available on the sony site) for VAIO gate s

  • Unable to use the Disk Defragmenter tool in Windows XP

    Original title: I use windows xp why used my computer open the disk defragmentation If I try to open the disk defrag it says the file isint there.

  • What database to use in BB 10 App

    Hello The app I want to draw will have a database that the user can query and based on the query, it will display the database information. I would like to use WebWorks.  The database is stored on the phone so that it will be available for the user,

  • Intel Rapid Start on single SSD (boot EUFI) technology

    Hi all I bought a new Dell Vostro 3360, Core i5, 8 GB RAM, 128 GB SSD, BIOS (A11) before Christmas. Was working fine and then failed to start. 2 days on the hotline, in the end the old motherboard (BIOS A11) has been replaced under warranty that it w