On Satellite L500D DVD player does not work - Code 39

my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

read here:

http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

Tags: Toshiba

Similar Questions

  • Satellite L650 - DVD player does not work and not visible in my computer

    Hello

    recently, I noticed that my dvd on my toshiba drive does not work.
    This isn't even apper in the 'My Computer' folder.
    And when I put a cd or dvd in the drive, it does nothing... Here is the screen of "My computer":

    http://img267.imageshack.us/img267/8458/31854306.jpg

    He had previously worked, but I don't use dvd for a long time player and when I tried yesterday it did not work...

    Hello

    You need to remove the upper and lower registry filters.
    But before doing so, please remove the CD/DVD drive in Device Manager.

    Then start the registry (regedit) and then remove the filters above and below this key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Then restart the laptop

    I think this should help you

    Good luck

  • Satellite P20: DVD player does not work

    I have a rug * UJ-820 s for a DVD player, but it has stopped working, I put a disc but nothing more to share a bit of ROAR. I looked in the Device Manager, where it says that "the driver may be corrupted or missing. (Code 39) »

    I uninstalled and reinstalled but I still get the same error. Anyone know if there is a update available or if there is something else I should do to address this issue? Thank you.

    Hello

    I noticed that many users on this forum have reported the same issue. It's a very strange question, and I really can't understand why this happen.

    In any case, thanks for the comments.

  • Satellite P25-S520 - DVD player does not work properly

    Difficulty of DVD player or buy the external drive

    My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

    I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

    An attempt to update the driver has also fails.

    I was able to copy a CD of music last night so that at least works properly.

    Does anyone know how can I fix? The important part is to be able to load my new program.

    Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

    Thanks for any help,
    Humbaba3000BC

    Satellite P25-S520
    PIONEER DVD - RW DVR-K12D
    Driver provider: Microsoft
    Driver date: 01/07/2001
    Driver version: 5.1.2535.0
    Digital signer: Microsoft Windows Publisher

    Any external USB CD/DVD drive will be compatible with your laptop.

    However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

    So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

  • On Qosmio G20 DVD player does not work

    On my laptop dvd player does not work perfectly.
    I can watch DVDs and CDs, but I can't burn CDs or DVDs at all.

    This laptop is a former view model and think that when I bought the store I bought it since deleted most of the information

    Help, please

    Thank you

    Hello

    There are two possible reasons why you are not able to copy anything to the CD or DVD.

    First, it may be possible that the drives used are not entirely compatible.
    In such cases, it s always advisable to test different CD and DVD from different manufacturers.

    Secondly, the issue could be related to a defective laser lens; in many cases, this can happen because of a physical constraint. If the laser lens can not calibrate in a good position, then the player will not be able to handle the inserted discs.
    This could be the worst case, because this issue is not repairable. Just a STRANGE replacement could help.

  • Mat * one years (uj-840) DVD player does not work properly

    The Mat * one years (uj-840) DVD player does not work properly.
    A symptom of the problem is that the icon does not appear in 'my computer '.
    more and she does not recognize the CD.

    I went to the properties of the drive through Device Manager and saw the following message is displayed:

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Click Troubleshoot to start the troubleshooter for this device. »

    Following the instruction of the troubleshooter, I tried to update my driver through
    Device Manager, but it tells me that the current driver is the more up-to-date version.
    In the properties of the drive, I found that my driver version is: 5.1.2535.0

    What is a simple problem that has a solution?
    I don't see other actions to find the root of the problem.

    Thank you

    I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
    Check it out!

  • DVD player does not work with Windows 10 on Acer Aspire 5553 G

    DVD player does not work with Windows 10 on Acer Aspire 5553 G. I waited for a fix of Windows a whole year now and I have tried several fixes that didn't work. Are there new solutions for this problem?

    http://community.Acer.com/T5/Windows-10/5553g-Windows-10/TD-p/375386/page/2

  • My Dvd Player does not work. When a disc is in, it makes some noises but never charges upward.

    My Dvd Player does not work. When a disc is in, it makes some noises but never charges upward. Had this problem when I first bought the laptop but a parent set. Now I don't know how to solve the problem again.

    Maybe the lens needs to be cleaned or maybe gear or bearing broke. Seems like a hardware problem. Better do inspected by a mechanic of the computer. S.Sengupta Media Center MVP

  • Satellite A500 and Win8 - DVD player does not work

    I upgraded my Satellite A500-17 X to Windows 8, but now my DVD drive does not work.

    Anyone know how I can get it working again.
    Thank you.
    Cumbria

    Solution here:
    http://www.CSD.Toshiba.com/cgi-bin/t...e&soID=3516888

    * Uninstall Toshiba programs: *.
    • TOSHIBA Recovery Media Creator
    • TOSHIBA Disc Creator
    Then restart your PC using the power--> reboot option in Windows 8.
    Your CD/DVD should be available now.
    To help uninstall these programs, follow the instructions below

    * To uninstall a program or application: *.
    1. on the home screen, type Control Panel
    2. select Programs--> uninstall a program
    3. find two programs listed above and uninstall these applications
    4. once the application programs are uninstalled, restart your computer using the power--> reboot option in Windows 8
    5. when the power to the computer on the CD/DVD drive should be available
    If the CD/DVD drive still does not appear, follow the instructions below to uninstall a device driver

    * To uninstall a device driver: *.
    1. on the home screen, type Device Manager
    2. Select Device Manager > CD-ROM/DVD-ROM drives > right click on the displayed device > select uninstall.
    3. once the driver uninstall, shut down your computer by using the method of restart. The driver will be installed automatically when the computer restarts.
    4. the CD/DVD drive should now be shown.

  • DVD player does not work error code 36 please help

    I have a computer toshiba laptop satellite my dvd rom is not working, it does not give me the error code 36

    Hello

    In addition to the BIOS settings the player himself could have problems.

    -------------

    This instrument requires a PCI interrupt but is configured for an ISA interrupt (or vice versa).
    Please use the computer's system setup program to reconfigure the interrupt for this device.
    (Code 36)

    Interrupt request (IRQ) translation failed.

    Try to use the BIOS Setup tool to change the settings for IRQ reservations (if such options exist). The BIOS can have options to reserve certain IRQS for interconnection of peripheral components (PCI) or ISA devices. For more information about changing the BIOS settings, see the documentation for the hardware.

    On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.

    --------------------------------

    Check with Toshiba support

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    ===========

    If you have problems after checking the BIOS settings:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Portege R500 - DVD player does not work

    Hello
    I love my laptop Portege I bought this month of September. The only thing is that the DVD player is not working for some time.
    -When I put a DVD or CD, I realize I can't freely turn the disc in the drive while it is still open. Strange, but I don't see anything blocking the rotation of the disk.
    -The system does not recognize at all have a DVD player. Initially, it worked, I can't say exactly when it went wrong. I checked with Toshiba Assist: in the information panel, it shows no info on the DVD player, in diagnostic Panel, I have the opportunity to check the DVD but when the test system is just jump the operation all the time, indicating that the Player cannot be found.
    -In the control panel I don't see no more among the hardvers
    -For starting, the DVD is one last thing to check in my BIOS settings. But in fact when the start-up the laptop I can hear the sound of the reader looking for something inside, turning or trying to rotate the disc, but it seems always becomes stuck and starting takes like 5-7 minutes due to lengthy trials, get the DVD player work in vain.
    -Now even when I put the energy setting to oriented perf, I no longer hear the system would look for DVD (setting the player gets off everything when using not saving)

    Someone from Toshiba support could help me? Is it possible to check this problem with the remote connection to my laptop, or something? Or should I take it to the service? With this, I also have a little challenge: I bought my laptop in Hungary, but now I stay in Japan throughout the year. So I would need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible, direct mail also. Thanks in advance!

    > Could someone support for Toshiba to help me?
    To do this, you will need to get in touch with the Toshiba ASP in your country.
    Here in the forum you can get suggestions form common users because it s a user forum to ;)

    > Is it possible to check this problem with the remote connection to my laptop, or something?
    I doubt that this is possible since this could be a hardware problem

    > Or should I take it to the service?
    Maybe this would be the best

    > I need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible by direct mail also
    On the page of Toshiba Europe, I was able to find an info on TOSHIBA EMEA LIMITED WARRANTY for NOTEBOOKS.
    This warranty is applicable only in the EMEA region (Europe, Middle East and Africa) and can be executed in any
    Countries the EMEA where Toshiba or its Service providers allowed offers warranty service terms and conditions provided for in the present
    warranty. This warranty covers the costs of service parts and labor needed to restore your system to full operational status.

    As you can see in the Japan is not covered by the EMEA region :( So I doubt that the warranty will cover the costs to the Japan.

  • Satellite A300 - DVD player does not

    Hello

    I wonder if someone can help me my dvd drive does not work.
    The little green light does not light and it does not open.

    I used the PIN on the side to open and put a disc in but still nothing.
    I also looked in device management, but he says that the driver is working fine

    Please help im totally stuck

    Dean of the thanks

    Hello

    It seems that your drive is defective and must be replaced. If he doesn t open more you can nothing do I think.
    But you can open the drive if you go into the BIOS?

    If this isn't the case, you should contact the service provider authorized in your country. They can replace the drive of your. If it of under warranty, the repair should be free for you.

    Good luck! :)

  • DVD player does not work after update

    After you install SP3, my CD/DVD drive does not work with DVD but CD is fine.

    Hi Kebir,

    Run the patch from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

    In addition, you can follow the steps in the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

    What is the faulty drive, or the software that is missing

    Hello

    What happens if you close all programs and then insert the disc?

    -------------------------------------------------------------------------

    If you have problems with CD/DVD drive:

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • My DVD player does not work and all the information I can find is "this device does not work correctly.

    Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

    I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

    I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
    entries that do not fix the resolution of problems and those who "could" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
    There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
    Parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • Compact Daq or Rio measurement signal and datalog

    Hello I'm in a project to create a diagnostic for an offshore wind turbine generator system. So I have to choose a material acquisition and make the basic operations with the measured signals. The equipment has to work without being connected to a PC

  • S277HK drivers

    I try to install the drivers for the monitor in Windows 10 S277HK and the response of the system the generic Plug & Play monitor is updated. Y at - it a special procedure to install these drivers? Thanks for your help.

  • Operation of TextField

    Hello I am wanting to write a paragraph of text and display it on screen in my application. I don't know, I read that the TextField creates a modifiable on-screen text box. How would you propose to create this paragraph? I simply would use much Label

  • Fatal error DirectX! Code: 15. Result: 0 x 80070057: E_INVALIDARG

    What's wrong?. This error message appears when I charge up to steam to play my game Just Cause 2. and I checked my com has DirectX 10, and the system requirements are: Operating system: Microsoft Windows Vista SP1 or Windows 7Processor: Intel Core 2

  • I paid for Ceps, how long will he spend to allow?

    I paid for Ceps, how long will he spend to allow?