On startup, I get the following message: __Error C:\WINDOWS\cleamsat.dll the specified module is not found .__I am unable to restore the system to an earlier date and now everything is real slow loading.

If anyone can help please let me know. I had a virus recently (antivir solution pro), which is now deleted. The message appeared from this point.

It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
Here are the detailed instructions that protect you and solve your problem in the 'right' way.
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
Here is a link to a popular registry backup tool:
You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
Scroll through the list and look for a boot entry associated files in the error message.
If you can't find on the connection tab, look in any tab.
Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
Given that you had or have an infection, followed with this:
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.
Restart your computer and solve the outstanding issues.

Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Tags: Windows

Similar Questions

  • I restored the computer to an earlier date and now the password windows 7 won't save us.

    I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

    I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

    This means that a different password was in effect at this point, even if your daughter thinks otherwise. There are a lot of options built into Windows to help you out of this situation:
    • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
    • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
    • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
    • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
    • Check your paper files (works only if you threw down the password somewhere)
    The most important point would be: run a machine without a spare admin account is about as risky to have a house key. Sooner or later, he is at risk for any number of reasons.

  • Can restore the computer to an earlier date and now get on the desktop.

    I went to use the computer yesterday and it updated. HP laptop with windows 8.1. Then it says update failed. Today I tried to restore to a different date and it failed. Today, I tried again and came back a month. I only have windows 8 and mechanic system on it. I use to connect remotely to work. Now, when I restart it goes to a system recovery option and I have no date to select.  He asks for recovery disk, but I did not. What are my options

    I had a similar problem. I updated my computer to windows vista 7 and wanted to go back but could not not because vista wasn't a registered earlier version. Then I accidentally deleted my slui and rundll.exe and couldn't get them back because there was no previous version. Given that I have not configured a backup, I couldn't restore the computer to its previous versions or any folder.

    The only way for you to restore is if you had implemented a backup and took the opportunity to finish the backup. The backup must be on an external drive, because when you configure a backup for PC, it requires an external backup. In my case, no backup copy has been implemented. If you remember where the backup was the installation, it is what she wants.

    Since you say that there is no recovery disk, I would contact with via phone, Microsoft to see if you can return to windows 8, 8.1 No.

    As an alternative, if you look at the underside of your laptop, or on the side of your PC, you will find the product code.

    Go to http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only here.

    Download the version of windows you had when the program is in place, insert the product key and just follow the instructions the site to make you say

  • I tried to restore my system to an earlier date and it starts but when it finishes I get the message that it cannot be restored to this date. I tried a few dates and the same message and I've done it before.

    I'm just trying to restore to an earlier date of timeor. I have too many freeze ups.

    Try to restore mode without failure.

  • After the message "error loading c:\windows\ulavodej.ddll specified module is not found.

    When the computer receive following message:

    "error loading c:\windows\ulavodej.dll specified module is not found."

    any help to fix this would be appreciated.

    Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

    When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

    First of all, download, install, update and run full scans with two of these free analytical tools:

    MalwareBytes AntiMalware
    SUPERAntiSpyware

    Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

    If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

    Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

  • Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

    I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • Error on startup: "Error loading C;\windows\apakahubozerahe.dll the specified module is not found."

    Whenever I start my PC, you receive this error message; "Error loading C;\windows\apakahubozerahe.dll the specified module is not found.   How can I get rid of this? I can't find the file in c: Windows to remove and my registry cleaner does not clean it?

    He does not seem to cause any trouble and disappears when OK is hit.

    Hi Kevin!
    Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
    1. after the download is complete, select autoruns & right click on it
    2. click on "extract here".
    3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
    4. what which is complete, Open or run "autoruns".
    5. in the opened window, click 'all'.
    6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
    7 right-click & click delete & ok

    He helped?

  • I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

    I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

    Hello

    I googled this file pofusido.dll and it could be caused by a virus.

    I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

    Download and install the free http://www.malwarebytes.org/

    Restart the computer and keep pressing F8 to get into safe mode with network connection.

    Once you have updated Malwarebytes run and see if it can remove the virus.

    So delete all cookies in your internet Explorer.

    Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

  • "I get this started" error loading winera32.rom the specified module is not found.

    When windows starts, this message appears "error when loading winera32.rom the specified module is not found". the rest of the windows works fine.

    It's a malware. It has been removed from your AntiVirus Scanner and registry entries are always present to start the malicious program at startup.

    Start regedit.exe and search (F3 or CTRL + F) for winera32.romand remove all the entries that you find.

    For more safety, perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

    André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

    I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
    I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

    Thank you

    I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
    I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

    Thank you

    Hello

    you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

    check the reports on the problems and solutions

    You can do a support ticket, follow the link

    http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

    Microsoft product support has some tools that will be useful and can help to find a solution

    have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

  • Desktop Windows Manager is disabled and the theme service is not running. Error 126: the specified module is not found. »

    I tried to install VistaOSX the theme of this site http://vista-os-x.en.softonic.com/. My current theme of vista disappeared and he turned to classic windows. I'm not able to activate Desktop Windows Manager. Error code I get everything by starting the service theme is "Windows could not start the service theme on the local computer. Error 126: the specified module is not found. »

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    Mick Murphy - Microsoft partner

  • What does the message "error during loading, the specified module is not found means?

    The message I receive when I connect to my computer.

    (1) could not load or run C/Julia/App.Data/Local/Temp/Csrss.exe'Specifed in the registry.  Make sure that the file exists on your computer or remove the reference to it in the registry.

    (2) RunDLL - "error loading C:/users/Julia/AppData/Local/dsDEXPrt.dll - the specified module could not be found

    (3) then, I get the message asking me to buy a full version of Vista Internet Security 2012, and as a result, I was not able to set up the internet.

    What do you advise?

    Your computer is infected.  If you still have problems after following the instructions above, you can receive free help online to one of the following online forums that specialize in the removal of malware.

    Malware removal Forum
    Safer Networking Forum

    What is the Tech Forum

  • Error: "error loading C:\Users\K***\cnmss"the specified module is not found.

    Original title: RunDLL
    I get "error loading C:\Users\K***\cnmss".

    The specified module could not be found

    What should I do to make it better?

    Hello
     

    1. when exactly you get this error message?
    2 have you made any changes to the computer before the show?
    Step 1:
    Check if the problem persists in safe mode.
    Reference:
    Step 2:
    Try to perform the clean boot and check if it helps, here is the link:
    http://support.Microsoft.com/kb/929135
    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  • Error loading C:\...".dll" the specified module is not found.

    For the last two days, whenever I start my calculation I have two pop up with two different paths "dll" error messages  the message indicates that the ' specified module could not be found.  How can I fix it?

    Hello

    Good luck which is malware then please do a thorough check. Following message will show how
    to delete a startup message.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • When Vista restarts, get the error "users\...~\\ntload.dll-que the specified module is not found."

    Whenever I start Windows, I get error message users\...~\\ntload.dll-que the specified module could not be found.

    Hello

    To remove the error message if still there after the controls above to malware.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured so that it starts automatically when
    your system boots and you connect. Autoruns also shows you the complete list of the registry
    and where applications can configure Auto-start for the files settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    I hope this helps.

Maybe you are looking for

  • Where to download the latest drivers for laptop Lenovo G700?

    I want to download and install new drivers for my laptop G700 NOT AUTOMATICALLY, but by downloading them manually. Y at - it a special driver/firmware downloads web page for this model of laptop computer? Peter

  • lag windows minute 60 seconds 7

    I am running Windows 7. My question is in games, every 60 seconds, I have a lag of a half second. I read pages and pages of corrections - they all relate wireless. I disabled IPv6, i ' v tried to disable the Media Planner, turned off the sound, tried

  • How to monitor running VI?

    I tried to use the express vi of elapsed time, as the sub - vi as my main vi. What I get is only elapsed time updates on the 'Sub - vi' when he finished each process, and the appellant vi updates only the elapsed time when the subvi ends. My sub - vi

  • When I tried windows restore the system on a XP machine, nothing happens.

    What are the factors that prevent the Sytem Restore to work?

  • Pavilion dv7 - 4263cl: hard drive problems

    Long story short, OS could not start windows with a missing BOOTMGR message, recovery disc, not work, ordered new HP recovery disks.  To cover, I ordered a new hard drive to replace it, with the same characteristics but a 1 Toshiba to. OK, installed