On the end Copyright dialog box: question for OR

Similar Questions

• Print the brochure-page editing and print dialog box questions

  Hi people,

  I have a small organic seed in Southern California company and I am looking to do our first seed catalog using what I would describe as a "zine" format: a letter-sized document that is folded, resulting in a booklet composed of half pages (I don't know if there is a more technical term to do this (, please correct me). I use InDesign 5 and Mac OS X Snow Leopard.

  
  

  When I started doing the document, it seemed logical to start with my page as a 'half letter' size, because I had read about the "Print booklet" feature of Adobe that would automatically print the pages in the order appropriate for folding. After doing a few pages of my catalog, I decided to do a test run this function, as I suspected things may be more difficult that it seemed. I ran against two problems while doing so, and I hope someone here can help give me an idea.

  
  

  The first problem is that I can't get the pages to impose properly by adopting a system of alternative numbering on the pages themselves. To explain: I chose '2-top stitching horse' in the settings of the printed booklet. I have a paper of 10 pages of 5 blocks spread. In the menu document, I put my layout to start on page 2 so that gaps appear side by side in the pages. However, I also want page numbers on my zine so I started a new section number (which I gave an A prefix) on what is ultimately the fourth page of the layout. This numbering comes as '1' on the fourth page and produced consecutively from here (pages 4-10, on the spread in the page layout area are labeled 1,2,3,4,5,6,7 on the pages themselves). It seems that booklet printing think my second section (A) on page 1 is where it should start stitching horse formatting. The help section on booklet written print Adobe, 'If you have split the document into sections of page numbers, you should enter section page numbers (for example, Sec2:11) "in the range field.". However, they recommend only do that if you want specific pages to the format ranges, while I would like to format the entire document. However, I tried to do that, suspicious that the first three pages were not formatted properly. However, I could not yet find a way to clarify my section A in the range box. I typed in things like "SecA:1" but I get a message that says: "one or more of the specified pages aren't valid page names." I note when I stripped the formatting of the document the print booklet feature requires the pages in the correct order. Thus, this problem is not the end of the world. However, what I lost is the ability to have numbers of pages printed on my document, unless I want to manually add to each page (and then having to deal with reformatting if I ever add or remove pages of the document in the future).

  
  

  The second and more important problem that I have is to get the pages to print even close correct. I have a printer Brother HL - 5340 D laser has a two-sided feature, and I thought there would be a way to print just two pages of my catalog (half-letter pages) on a letter page size, side by side, double faces and in the right order for folding. After trying a number of different options (by changing the page size and the page orientation in the print area), I was not able to get the printer to print these pages, with success, or even in the right size and orientation - or even on the set of law, indeed. Once I played around with all the settings I managed to pull of "Tray1" (and created a preset in the OS X print settings), but I can't understand how I got this opportunity to stick. Of course, Adobe recommends using their own printer on the Brother driver dialog box, but duplex, for example, is impossible without ebb in the print based on the OS setting. I turned, something that has worked well with other InDesign documents I created. In this case, however, I have not been able for duplex printing to work.

  
  

  I wonder if there are conflicts being created between two printer settings, or maybe I just made a mistake starting my catalog with a letter paper size "half" and now try to print two of my pages letter half on a sheet of letter-sized (and double-sided, at that). As a neophyte InDesign (six months experience) I still wonder if there is something really obvious that I'm missing.

  
  

  Does anyone have a picture of my situation?

  Waiting patiently. Thanks people...

  
  

  Quin

  chirrchirr wrote:

  Peter,

  See the screenshot above (two positions to the top) where I show the "spreads" I made in the document. I have 56 pages in 29 spreads

  The number of "spreads" appearing in the pages Panel is misleading since several ov them don't have only one page. I do not see the whole Board, of course, but my guess is that all the "spreads" we do not have two pages. Normall is the first and the last spread that are singles, but you have done strange things with the numbering.

  In any case, is printing print booklet 28 pages. The only way that can happen if additional blank pages are added is if you did not include the original White you have created. You have to go into setup to display the print dialog box and select include blank pages there.

• question of remote server in the site Configuration dialog box.

  Hello

  I received client ftp information so that I can connect to its server to download files.

  The new CS5 box installation site is a bit different (hard)...

  I set up the folder on my desktop to download and set up the site (directions).

  Problem: under the "Servers" tab, there name address remote connection and tests... mine has two lines of info.

  The top one is my ftp from my personal site.

  Below, it is the only one that I created just to get the download and I gave her a false name.

  I have to remove the top? Because when I go to download it downloads files in my personal site - not customers. Or, should I uncheck "remote" from the top and activate at the bottom.

  I don't want to affect my site at all. Please explain how this new method works... How can I control + choose what server I want content to download from.

  I mean, if I had to remove this dialog box mine, then switch back to the my site dialog box, my connection to the remote server are deleted as well?

  Thank you!

  Too bad. I have it.

  I hesitated to experiment, but it seems that you can select a "remote" at the same time, so all I had to do was click on the customer.

• Completely disable the "Untrusted connection" dialog box

  I am a professional developer stuck behind a proxy at work. The behavior of this power of Attorney causes the SSL connection attempts get a certificate signed by my company, not the web site I try to connect to. I have no control over the proxy, so change this behaviour is out of the question.

  I need to use Firefox for a number of things and am generally fine adding exceptions for sites that I want to connect. However, some sites like github.com loading resources many other areas via SSL (CDN, Google Analytics, Gravatar, etc.). For these sites, I try to add exceptions in order to allow the company a signed, cert but I can only add to github.com, not any other sites, so even after adding an exception I'm brought back in the right to the page "this connection is untrusted". No matter how many times I try to grant a waiver, I never really get to github.com.

  Other browsers on my system are administered remotely and seem to be configured to automatically trust signed certs society. I need to know how to manually configure Firefox to always trust these certificates OR never shows me the unreliable connection dialog box and just maybe show red in the address bar when he does not trust the site cert.

  Apparently in OS X, there are at the level of the authorities of certification system. I don't know why it does not use Firefox, but I was able to export the CA company and import it in Firefox. Finally solved my problem.

• The open file dialog box does not show up on Windows 7

  My first installation of Win 7 32 bit on my systemeverything was end of work, but after some time all of a sudden all the program that I opened in Windows 7 which has an and save as dialog box or try to download an attachment in mail. the open file dialog box will appear, so I can't be able to open, save, and download any file, it seems that the open a file dialog box is disabled somehow, but I can't be able to find the exact cause of this problem so I need help very badly as soon as possible. So please help and answer...

  Hello Bharat Bhushan Wadhwa,

  Below, I've added a link where other users have had this problem.  There are a few steps to try troubleshooting.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-open-file-or-browse-for-file-dialog-box-doesn ' t/50f452f7-f73b-4ad5-8887-b8bb361f07b9

  Thank you

• Native of filebrowse using and the cascading Save dialog box

  In my application I need to open file and file save dialog box when a specific button is clicked. I looked at the docs of stunts, but I found that the native options. Tried the native alert dialog, change of filebrowse dialog type. It displays well on Simulator, but could not get any output file that will be used in the Qt code.

  I pass these parameters

  int * num = NULL;

  char * folder [1024];
  dialog_update (alert_dialog);

  to dialog_event_get_filebrowse_filepaths(event,file,num), but it always returns BPS_FAILURE.

  In addition, access_shared is present in the bar-descriptor

  Here is my code:

  //slot function
  void App::fileOpen(){
      //===========================
          dialog_instance_t alert_dialog = 0;
  
          bps_initialize();
  
          dialog_request_events(0);    //0 indicates that all events are requested
  
          if (dialog_create_filebrowse(&alert_dialog) != BPS_SUCCESS) {
                      fprintf(stderr, "Failed to create alert dialog.");
                      return ;
              }
              const char* extensions[] = {"*.*","*.jpg","*.jpeg","*.mp3","*.wav","*.mp4","*.txt","*.doc","*.pdf"};
              int items = 9;
              if(dialog_set_filebrowse_filter(alert_dialog, extensions,items) != BPS_SUCCESS){
                  fprintf(stderr, "Failed to set alert dialog message text.");
                          dialog_destroy(alert_dialog);
                         alert_dialog = 0;
                         return ;
              }
             if( dialog_set_filebrowse_multiselect(alert_dialog,FALSE)!=BPS_SUCCESS){
                 fprintf(stderr, "Failed to set alert dialog message text.");
                              dialog_destroy(alert_dialog);
                             alert_dialog = 0;
                             return ;
             }
  
          if (dialog_show(alert_dialog) != BPS_SUCCESS) {
              fprintf(stderr, "Failed to show alert dialog.");
              dialog_destroy(alert_dialog);
              alert_dialog = 0;
              return ;
          }
  
          int shutdown =0;
          while (!shutdown) {
              bps_event_t *event = NULL;
              bps_get_event(&event, -1);    // -1 means that the function waits
                                            // for an event before returning
  
              if (event) {
                  if (bps_event_get_domain(event) == dialog_get_domain()) {
  
                      int selectedIndex =
                          dialog_event_get_selected_index(event);
                      const char* label =
                          dialog_event_get_selected_label(event);
                      const char* context =
                          dialog_event_get_selected_context(event);
  
                      char **fileArray[]={};
                      int *numFiles = NULL;
                     //
                            if(selectedIndex == 0){
         shutdown = 1;//user press the cancel button on dialog; close the dialog
     }
     else if(selectedIndex == 1){
         if(dialog_event_get_filebrowse_filepaths(event,file,num)!=BPS_SUCCESS){
         fprintf(stderr,"File open fail");
     }
     else{
  

  //debug purposes
         fprintf(stderr,"File array: %d/n",sizeof(file)*1024);
             fprintf(stderr,"Num files: %n",num);
             //fprintf(stderr,"Files int: %d",files);
     }
  
     }
                  }
              }
          }
  
          if (alert_dialog) {
              dialog_destroy(alert_dialog);
          }
          //===========================
  }
  

  Native Subforums have no useful information on this subject. Any help is greatly appreciated

  Hello again, here's the example as promised.

  To use the native filebrowse dialog box, the native code must run in its own thread to prevent the user interface in the Cascades to block. This is achieved by encapsulating all the dialog box code in a class derived from QThread.  The class I wrote is called FileBrowseDialog

  FileBrowseDialog.hpp

  #ifndef FILEBROWSEDIALOG_HPP_
  #define FILEBROWSEDIALOG_HPP_
  
  #include 
  #include 
  #include 
  
  /*
   * The file browse dialog displays a dialog to browse and select
   * files from shared folders on the system.
   */
  class FileBrowseDialog : public QThread
  {
      Q_OBJECT
  
      /*
       * QML property to allow multiple selection
       */
      Q_PROPERTY(bool multiselect READ getMultiSelect WRITE setMultiSelect)
  
      /*
       * QML property to read the selected filenames
       */
      Q_PROPERTY(QVariant filepaths READ getFilePaths)
  
      /*
       * QML property to set or get the file filters. This is an
       * list array variant.
       */
      Q_PROPERTY(QVariant filters READ getFilters WRITE setFilters)
  public:
      /*
       * Ctor and Dtor
       */
      FileBrowseDialog(QObject* parent = 0);
      virtual ~FileBrowseDialog();
  
      /*
       * Exposed to QML to start the run loop which creates and displays the dialog.
       * The dialog is shown until a button is clicked.
       */
      Q_INVOKABLE void show();
  
  public:
      /*
       * Getter for the selected filenames QML property
       */
      QVariant getFilePaths() const;
  
      /*
       * Setter and Getter for the filters QML property
       */
      QVariant getFilters() const;
      void setFilters(QVariant const& value);
  
      /*
       * Getter and Setter for the multiselect QML property
       */
      bool getMultiSelect() const;
      void setMultiSelect(bool value);
  
  signals:
      /*
       * Signal emitted when the OK button has been clicked on the browse dialog
       * The OK button is not enabled unless a file is selected
       */
      void selectionCompleted();
  
      /*
       * Signal emitted when the cancel button has been clicked on the browse dialog
       */
      void selectionCancelled();
  
  protected:
      /*
       * Implements the run loop. Dialog stays open until a button is clicked.
       */
      virtual void run();
  
  protected:
      dialog_instance_t m_dialog;
      bool m_multiSelect;
      QVariantList m_filePaths;
      QVariantList m_filters;
  };
  
  #endif /* FILEBROWSEDIALOG_HPP_ */
  

  FileBrowseDialog.cpp

  #include "FileBrowseDialog.hpp"
  #include 
  #include 
  
  FileBrowseDialog::FileBrowseDialog(QObject* parent)
      : QThread(parent)
      , m_multiSelect(false)
  {
      m_filters.push_back(QString("*.*"));
  }
  
  FileBrowseDialog::~FileBrowseDialog()
  {
  }
  
  void FileBrowseDialog::show()
  {
      if (!isRunning())
      {
          m_filePaths.clear();
          start();
      }
  }
  
  QVariant FileBrowseDialog::getFilePaths() const
  {
      return m_filePaths;
  }
  
  bool FileBrowseDialog::getMultiSelect() const
  {
      return m_multiSelect;
  }
  
  void FileBrowseDialog::setMultiSelect(bool value)
  {
      m_multiSelect = value;
  }
  
  QVariant FileBrowseDialog::getFilters() const
  {
      return m_filters;
  }
  
  void FileBrowseDialog::setFilters(QVariant const& value)
  {
      m_filters = value.toList();
      qDebug() << "filter count: " << m_filters.count();
  }
  
  void FileBrowseDialog::run()
  {
      bps_initialize();
  
      //request all dialog events
      dialog_request_events(0);
      if (dialog_create_filebrowse(&m_dialog) != BPS_SUCCESS)
      {
          qDebug() << "Failed to create file browse dialog.";
          emit selectionCancelled();
          return;
      }
  
      //set the selection filters
      if (m_filters.count() > 0)
      {
          char** ext = (char**)new char[m_filters.count()*sizeof(char*)];
          int i = 0;
          for (QVariantList::iterator it = m_filters.begin(); it != m_filters.end(); ++it, ++i)
          {
              QString filter = it->toString();
              if (!filter.trimmed().isEmpty())
              {
                  int length = (filter.length() + 1) * sizeof(char);
                  ext[i] = new char[length];
                  strncpy(ext[i], filter.toAscii(), length);
              }
          }
          if (dialog_set_filebrowse_filter(m_dialog, (const char**)ext, m_filters.count()) != BPS_SUCCESS)
          {
              qDebug() << "unable to set file browse dialog extensions";
          }
          for (i = 0; i < m_filters.count(); i++)
          {
              delete ext[i];
          }
          delete ext;
      }
  
      if (dialog_show(m_dialog) != BPS_SUCCESS)
      {
          qDebug() << "Failed to show file browse dialog.";
          dialog_destroy(m_dialog);
          m_dialog = 0;
          emit selectionCancelled();
          return;
      }
  
      bool shutdown = false;
      while (!shutdown)
      {
          bps_event_t* event = NULL;
          bps_get_event(&event, -1);    // -1 means that the function waits
          // for an event before returning
  
          if (event)
          {
              if (bps_event_get_domain(event) == dialog_get_domain())
              {
                  //0=ok, 1=cancel
                  int selectedIndex = dialog_event_get_selected_index(event);
  
                  if (selectedIndex == 1)
                  {
                      int count;
                      char** filepaths;
                      if (BPS_SUCCESS == dialog_event_get_filebrowse_filepaths(event, &filepaths, &count))
                      {
                          for (int i = 0; i < count; i++)
                          {
                              qDebug() << "selected file: " << filepaths[i];
                              m_filePaths.push_back(QString(filepaths[i]));
                          }
                          bps_free(filepaths);
                      }
                      emit selectionCompleted();
                  }
                  else
                  {
                      emit selectionCancelled();
                  }
  
                  qDebug() << "Got file browse dialog click";
                  shutdown = true;
              }
          }
      }
  
      if (m_dialog)
      {
          dialog_destroy(m_dialog);
      }
  }
  

  This class derives from QObject (by QThread) which means that it can be used by QML when it exposes properties and signals. The FileBrowseDialog class has 3 properties

  -multiple selection: a Boolean flag indicating if single or multiple selection is allowed

  -filepaths: a read only value that returns the list of files selected

  -Filters: a read/write value is where you can specify one or more filters to file (for example, ".doc", "*.jpg") etc.

  The next part is how you call the FileBrowseDialog through the QML. To do this, we must inform the QML of the FileBrowseDialog page. This is done in the App class via the qmlregistertype code.

  App.cpp

  #include 
  #include 
  #include 
  
  #include "app.hpp"
  #include "FileBrowseDialog.hpp"
  
  using namespace bb::cascades;
  
  App::App()
  {
      qmlRegisterType("Dialog.FileBrowse", 1, 0, "FileBrowseDialog");
      QmlDocument *qml = QmlDocument::create("main.qml");
      qml->setContextProperty("cs", this);
  
      AbstractPane *root = qml->createRootNode();
      Application::setScene(root);
  }
  

  The QML is now ready to be able to use the FileBrowseDialog. The example below is a page complete qml which has a button and a label. When we click on the FileBrowseDialog button is open, and all selected files will appear in the label.

  Main.QML

  import bb.cascades 1.0
  import Dialog.FileBrowse 1.0
  
  Page {
      content: Container {
          Label { id: filebrowseDialogLabel }
          Button {
              text : "File Browse Dialog"
              onClicked: {
                  filebrowseDialog.show();
              }
          }
          attachedObjects: [
              FileBrowseDialog {
                  id: filebrowseDialog
                  multiselect : true
                  filters : ["*.doc","*.jpg","*.txt"]
                  onSelectionCompleted: {
                      if(filebrowseDialog.filepaths.length>0)
                          filebrowseDialogLabel.text = filebrowseDialog.filepaths[0];
                      else
                          filebrowseDialogLabel.text = "no file selected";
                  }
                  onSelectionCancelled: {
                      filebrowseDialogLabel.text = "file browse dialog was cancelled";
                  }
              }
          ]
      }
  }
  

  And it's pretty much just invoke the native dialog file navigation in stunts. Please note save the file would follow a similar model, but I found that this dialog box was not particularly useful because it displays only a simple dialogbox with a text file name entry.

  See you soon

  Swann

• Lack of 'Print Settings' in the Canon printer dialog box

  Hello

  I googled around for this, but I have not found an answer to this question. Maybe someone here would know?

  I want to print a photo in Lightroom 3 on a MacBook Pro running Mac OS X 10.6 Snow Leopard. I have a printer Canon MP800R. I want Lightroom to manage the color, and I am able to choose glossy paper profile I want in the print job Panel in Lightroom. However, when I click on print and get to the part where I should disable color management in the printer dialog box I am not able to do. There is no section of print settings in the dialog box. For as far as I understand, all the important things happening in this section of print settings, see http://www.computer-darkroom.com/lr2_print/lr2-print.htm. Why I don't see print settings?

  I would add that if I go ahead anyway with Lightroom managed printing, the colors are disabled, but if I use Managed by printer colors are decent.

  Jan

  Jan

  I'm sure that the profile you choose LR Print | Print job . Color management | Profile: is not correct for your paper.

  SP4 is the profile of low quality for Photo Paper Plus Glossy which is a whole ' nother animal!

  It is, I do not think that Canon has released a specific profile for Glossy Photo paper which, I suppose, that they consider to be a document of 'consumer '.

  Whenever I used the paper, I used "managed by printer" and never imagined I could do much better with it.

  You can try setting "Canon IJ Printer Profile 2005 color" as well as the profile, but I'm reasonably confident that will give you exactly the same thing as "managed by printer" for the reason that I think it's the profile of the Canon driver applies "under the hood" when you make this choice.

  (You should try, or PP + SemiGloss Photo Paper Plus Glossy - they're good!)

  See you soon

  Tim

• Showing the full path of the file in the Save as dialog box

  I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.

  Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.

  And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.

  The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  ..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!

  I would like to just turn this simple file path bar,..., even that which is available in the Finder!

  Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian

  Imre of Glen Waverley wrote:

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  1 NO.

  2. we are all just users here and have no info about Apple's plans.

  If you do not want to let Apple know your feelings, you can send your comments here.

  http://www.Apple.com/feedback/

• Can not enter wildcard (*) in the file selection dialog box when opening a file

  It's something I've not seen before. I posted this question in the forum Autodesk AutoCad LT five days ago, but I got no answer at all. Because I'm not sure whether it is a Windows or a problem with Autocad, I thought I'll try to post here, too.

  On one of our AutoCad workstations, when you open a drawing, we cannot enter a wildcard character (*) in the file selection dialog box to help unravel the drawings.

  In other words, say there are 10 versions of a drawing with the number 5008. I should be able to enter the 5008 * and just see these ten designs. On this computer, when I try to type an asterisk (*), I get this error message: invalid character. The following characters are not allowed in file names: \ /: *? "<>

  Now, I know that they are not allowed... but I don't mean to create a file name. I'm just trying to classify them. On our other RTE Autocad workstations, the wildcard character works fine.  What's up with this one? Y at - it a setting or a variable that controls this?

  Thanks - Kevin

  Hello

  ·         The problem occurs with any other application?

  It may be some setting in Auto CAD, which raises the question, and its best you seek help from experts in DAO automatic.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't find 'save to desktop' in the Save as dialog box to an Excel on Win7

  In fact I do not see how to save any kind of file on my desktop with Win 7 and MS Office 2007 Pro.

  The game, February 3, 2011 15:44:39 + 0000, Maryriver wrote:

  I have not posted in forum excel because this problem occurs in all my MS Office 2007 Pro programs.  When I follow your suggested steps:

  "Open Excel > click on the Office button > Save As > close from the top left, click MORE > see icon on the desktop now? ' > click on the desktop.

  There is that no more save it as only includes orders for the economy in several formats, but the dialog box that opens shows not the desktop as the destination to save in.  The only affected destinations are;  models, Favorites, libraies, residential, computer group, WIN7C and network.  I explored all the and can not find any "desktop."

  Desktop is not listed under Favorites on the left side of the Save as
  dialog box? Simply click on it.

  But note that I strongly recommend against save data files in the
  desktop computer. My recommendation is that you put nothing else that shortcuts on
  the desktop computer. There are two things wrong to put the real files it:

  1. one day probably will remove you a real file, thinking that you were
  just remove a shortcut.

  2. you you cluttering up the desktop with too many files, making it difficult
  to find what you are looking for.

  You have to put your files Excel (and other real data files) in the
  Documents folder. If you have some of these files you want
  access often, put shortcuts to these files on the desktop.

  Ken Blake (MS-MVP)

• I try to print, get the error message "Please enable setting"Enable bidirectional communication"in the printer properties dialog box.

  When I tried to print I got the message (please turn on the setting "enable bidirectional Communication" in the printer properties dialog box ") but I need to know how to do this.

  On the start menu, menu on the side right should be a button devices and printers, which will bring you to the page printers. There you can find your printer and right click on it and select Properties. This would be the place to enable two-way communication, but beyond that, I can't help you as I don't know what would the Properties window for your printer.

• Definition of area of purge without any effects in the document size dialog box

  Hi all

  
  

  Can I create a new document with the bleeding, it works very well. Should I try to change the lost funds, it seems not to be saved by the document size dialog box.

  
  

  Here is my code to create the document:

  NewDocCmd InterfacePtr < ICommand > (() Utils < IDocumentCommands >-> CreateNewCommand(K2::kFullUI));))

  NewDocCmdData InterfacePtr < INewDocCmdData > (newDocCmd, UseDefaultIID());

  newDocCmdData-> SetCreateBasicDocument (kFalse);

  newDocCmdData-> SetNewDocumentPageSize (PMPageSize (width, height));

  newDocCmdData-> SetWideOrientation ((width>height)? kTrue: kFalse);

  newDocCmdData-> SetMargins (left, top, right, bottom);

  newDocCmdData-> SetNumPages (numPages);

  newDocCmdData-> SetPagesPerSpread (1);

  newDocCmdData-> SetColumns_4 (colNum, gridDist, IColumns::kVerticalColumnOrientation);

  newDocCmdData-> SetUseUniformBleed (false);

  PMRect bleedBox.

  bleedBox.Left (mm2pt(bleedLeft/1000.f));

  bleedBox.Top (mm2pt(bleedTop/1000.f));

  bleedBox.Right (mm2pt(bleedRight/1000.f));

  bleedBox.Bottom (mm2pt(bleedBottom/1000.f));

  newDocCmdData-> SetBleedBox (bleedBox);

  Create the new document.

  CmdUtils::ProcessCommand (newDocCmd);

  The document size dialog box shows my correct bleeding.

  And this is the code I use to change him bleed (suppose bleedBox has different values now):

  InterfacePtr < ICommand > pageCmd(CmdUtils::CreateCommand(kSetPageSizeCmdBoss));)

  InterfacePtr < IDocSetupCmdData > pageData (pageCmd, IID_IDOCSETUPCMDDATA);

  pageData-> SetDocSetupCmdData (docRef, PMPageSize (width, height), 1, 1, width > height, kLeftToRightBinding, kTrue);

  pageData-> SetUseUniformBleed (false);

  pageData-> SetBleedBox (bleedBox);

  The SetPageSizeCmd process

  CmdUtils::ProcessCommand (pageCmd);

  No error, but also no change in the dialog box the size of the document. Purge values are unchanged.

  What else I have to call the dialog box to show my new bleeding?

  
  

  If I give the word

  	BB2 = pageData-> GetBleedBox();

  then bb2, later the (modified) values.

  
  

  Thanks for all your advice!

  
  

  kb_alfa

  Hi kb_alfa

  Use kSetPageSetupPrefsCmdBoss instead of kSetPageSizeCmdBoss

  -Manan

• customize the sign in dialog box / right live

  Hello

  is the standard sign customation in the still impossible dialog box or you add this service in the new version?

  To change the next screen text fragments:

  

  Thank you

  Thomas

  Hello Ulrich.

  Customization of the sign in dialog box is not currently supported. We are currently working on some additional authentication features that, when released, allows you to provide a URL to display our custom sign in the user interface in a giving web view you full control over the sign in experience. This new feature will also include support for the displaced, including SAML and OAuth2.

  As go us further in the development of this feature, I'll be able to publish the target delivery schedule.

  Kristy

• Pipette in the curve adjustment dialog box average pixels, so the color balance is watered.

  Hi all.

  When you use the pipette to set the points black and white pixels of an image in the dialog box curve setting, I found that it seems not middle of the neighbouring pixels or provide a way to select a value "monochrome".  Thus, the color balance is still impaired and is thrown way if you happen to choose a noisy pixel (for example).

  I expect that there is an option to set the size of the sampling for the pipette area, but I don't see one.  I have considered making the monochrome image, defining curves, save them as a preset, and then reload the image color and apply the preset (if she does not leave me); but this seems heavy and hokey.  What is the usual procedure to adjust the tone curve of the image without changing its color balance?

  Thanks for any idea.

  When you select an eyedropper in the curves adjustment dialog box, you went to the eyedropper tool.

  You then set the sample in the Options bar.

  In the curves adjustment layer, any pipette also has sample settings in the Options bar.

  

• Why is there not a reference point locator in the scale tool dialog box in Illustrator?

  I guess that's also a suggestion that it is, but why isn't there a reference point locator in the scale tool dialog box in Illustrator? Maybe the function exists and I'm not aware, but it would just using the tool of the easier level. I realize, I can type in mathematics to scale upwards or downwards in the palette transform or workspace, but the scale tool dialog box offers the additional advantage to allow you to preview the results, while the other options are not. Am I missing something? Any help is appreciated.

  Roger,

  Maybe it's time for a feature request:

  Feature request/Bug Report Form