On two pc's, 1 Wired kb & maus, 1 wireless, they had to keep - right click on the page - to keep the text page & scroll operation. Difficulty?

Have two Dell optiplex home computers. The two same operating system windows 7. Use a wired keyboard and mouse and the other wireless.
On Web pages only using the same browser firefox on both pc, keyboard entry text constantly updated in a dialog box like this one and to use the scrolling of the mouse or the keyboard, the mouse has to right click on the page to reactivate the scrolling or entering text.
This most often happens on web pages than others, and the problem is the same on both PCs. Used to access the internet wireless modem.

The result is very encouraging to do exactly what is suggested.

I've had the mode without failure for an hour now and there is no re-emergence of the issue of page web text of scrolling/entry so far. I'm now working my way through the process of elimination and will do the same for the other pc and report today come back later.

Tags: Firefox

Similar Questions

  • website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

    website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

    This has happened

    Each time Firefox opened

    is after upgrade to 3.5?

    http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

    You create a new profile and install only the extension Web Developer, as recommended Chris?

  • wired computer and laptop wireless work very well, but do not see the other

    What did I miss?  My laptop wireless on my WRT54GS Office 1.1 works 100% and my ethernet v connected to the same router also, but neither one sees the other, so I can't share anything.

    Everything is XP.  I ran 'Add a new connection' on both machines, but this does not seem to do.

    In other works, how can I add a hard wired computer to a functioning WRT54GS wireless network?

    Thanks for the help.

    * beep *.

    In Windows: Make sure that the workgroup name is the same on all computers.  In addition, all computers must have "file and printer sharing" turned on.  In addition, you must configure at least one shared folder on each computer.

    In addition, go to the computer on each computer software firewall and set it to "trust", other computers on your network.

    I hope this helps.

  • Computer laptop Windows 7 can see other wired PC via a wireless connection by specifying the box "search programs and files" drive letter in the start menu, but not in the network screen

    My laptop with Windows 7 (64-bit) can not see the other desktop PC running Windows XP via a wireless connection, except if it is plugged into my laptop so only I can see them on the network.
    I checked all the working groups to ensure that all are the same.

    However, when my laptop into Wi - Fi, I could see the other wired desktop PC by specifying the network path in "search programs and files" to the start menu in the Windows 7 laptop, I was able to add network folder by specifying the drive letter for the connection and file I want to connect via a right click on the network to connect a network drive...

    Then, finally I can access any other desktop pc wired to shared folder via the Wi - Fi by this method.

    But I still don't see them on eventhrough network I can access by this method. Please help me solve this problem.

    Hi Hkway,

    • You are able to see the Windows 7 machine Windows XP computer when connected through wireless and if it is accessible through network?

    First of all, check if the NetBIOS protocol is installed on your Windows XP computer. To install the NetBIOS Protocol, follow these steps:

    1. click on start, click on Control Panel and then double-click network connections.

    2. right click on the card that you want to add NetBEUI to and then click Properties.

    3. on the general tab, click on install.

    4. click on Protocol and then click Add.

    5. Click to select NetBIOS protocol in the list, and then click OK.

    6. restart your computer.

    Also make sure that NetBIOS over TCP/IP is enabled in the Windows XP computer. To do this, follow these steps.

    Turn on NetBIOS over TCP/IP

    1. click onStart, click on Control Paneland then click on network connections and Internet.

    2. click onnetwork connections.

    3. right click onLocal area connectionand then click Properties.

    4. click onInternet Protocol (TCP/IP)and then click Properties.

    5. click on the tabgeneral and then click Advanced.

    6. click on theWINS tab.

    7. underNetBIOS setting, click Enable NetBIOS over TCP/IP, and then clickOK twice.

    8. click onclose to close the local area network connection properties dialog box.

    9. close the network connections window.

     

    After following the above steps, check if you can access the computer Windows XP of Windows 7 computer using the wireless connection.

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

    The title says it all really.

    I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
    Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
    Help, please.
    Thank you.
    original title: vista detection network but will not connect

    Hi JulianBeach,

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error message you get?
    3 is connected to the domain of the computer?
    4. what happens when you try to connect to the network?

    Try the steps from the following link:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Wireless network card: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • How can I get a scroll bar at the bottom of the page so I can see the right side of the page when I'm with two windows?

    With two or three open pages, I have scroll bars that allow me to see the right side of the other pages, but not on the page of Firefox.

    If you have a three-button mouse, click on the middle button
    and the mouse becomes a scroll controller.

  • Using Firefox 8.0 on a MacBook Pro I can no longer enlarge the text on web pages by dragging hand two fingers. Why?

    I just downloaded Firefox 8.0.1. I have a MacBook Pro with Mac OS X 10.5.8. In the past, I could easily enlarge text on a web page by dragging two fingers apart, or even, to make the text smaller by pinching the fingers together. I can no longer do this with the latest version of Firefox. If I run Safari instead, I can still use this feature of Mac. Y at - it a setting I need to change? Or is this a bug in the new version of Firefox?

    Wow. I can't believe that I finally understood that. Thank you.

  • Two fingers tap right-click (ALPS, Yoga 500) - here's how...

    Hello

    I just wanted to share and in which case I need information later it's nice to be able to find it on the internet if I forgot.

    I bought a Yoga 500 14 - IBD (born to Win10 - not upgraded) as is was on sale and I thought why not I need a second machine. It's actually a very nice machine and the Pentium seems much better in daily chores that I imagined (but her as Atom - like execution but in fact it's more like just below i3)

    However not everything is rosy red. Like the 900 and probably many other laptops of Lenovo, he got a very annoying problem. NO TAP TWO fingers FOR a RIGHT CLICK ! Argh! Beyond me a deemed manufacturer manage to get two bad finger tap!

    The Yoga of 500 I got is like the low end version of the 500 (although it got FHD IPS) and that's probably why they put in a touchpad ALPS while my 900 has got a Synaptics.

    I have not found any information about to enable two finger tap, right-click on ALPS touchpads on the internet so I messed up a little round in regedit (I'm confident enough so has not been worried, worst restore values) thought why not share.

    1. open regedit

    2 Goto - HKEY_CURRENT_USER\SOFTWARE\Apls\Apoint\Gesture

    3. change the value of 2TapShow to 1

    4. change the value 2TapSupport to 1

    5. modify 2TapSetting value set at 13 decimal hex d

    6. do the same for HKEY_LOCAL_MACHINE\SOFTWARE\Alps\Apoint\Gesture

    7 restart the machine

    Step 5 is optional. You are now in the control panel of the ALPS under multi finger set what you want two finger tap to do! Most likely, you want to have in the context menu, but there are also other options if you care right click.

    This information is for Windows 10 ALPS driver v8.201.1611.252 so things are not exactly the same on your laptop and of course the use of information is at your own risk. Messing around in regedit can make operating system unusable if you make a mistake!

    - ENJOY YOUR 'NEW' TOUCHPAD! --

    Also while adjusting your touchpad settings you can adjust the speed. Diffinately scroll speed to the maximum and sensitivity to the max as well. ALPS seems to jerk and get the fantom clicks if you're the type who just slightly touching the touchpad. Affecting sensicity max and the touchpad features very well no involuntary jerkyness and click.

    Sorry for a minor error!

    I was writing this in my OneNote and discovered an error.

    Point 5 is 2TapFunc NOT setting (!) However, this doesn't mean probably much - only that you should open the ALPS Control Panel to then hit the function instead of working just after regedit and restart both with the fingers together.

    Sorry for inconvinience but the forum does not allow me to edit a post efter sometime!

  • two fingers of y510p elan touchpad right click problem.

    Hi, I recently bought a Lenovo Y510p, and the touchpad is using software MOMENTUM. However, by default, it seems not to allow you to use two fingers to type to right click, or three for middle click.

    After digging the question, I discovered you can make some changes by installing the driver Asus Elantech 11.5.0.9 to allow you to see a lot more options in the Control Panel, and I've changed with success the Swapping and 3 functions touch 4 fingers.

    Despite this, I am fighting to change the tap water double finger.

    Is anyone able to help me with this issue?

    Thank you very much.

    mine solved it by installing the driver Asus Elantech 11.5.0.9. It will give same much u of other features also.

  • "Data dashboard" version 2.0 list drop-down list seen only "one, two, etc.» Instead of the text Enum

    I am currently using the new data on an iPad dashboard 1. I'm coding in suite developer Labview 2012. I found that switches work very well when it is associated with a shared variable. I finally managed to get the drop-down list to control a shared variable of data type typedef/enum. This control very well within the Labview program, but on the dashboard of data drop-down list shows only the "One" "two" etc... instead of the text 'This' Enum 'As' 'Other' I can write back to the dashboard with a text conversion of the enum to the dashboard and place it in a display of string over the fall down. While this gives the operator a display of the current Typedef/enum, it is not very intuitive. They must select 'One' to view 'This' "two to display 'Than' etc...

    How can I get the dashboard of data drop-down list control to display the text of the enum instead of "one" "two" etc?

    I think the point was that your question belongs to this other forum, not the forum of LabVIEW.

    (I'll ask the moderator to move this thread i).

  • U31-70 Alps touchpad - how to allow two-finger tap "right-click"?

    Hello

    I have a problem with the Alps touchpad in the U31. I would like to bring up the contextual (right click menu) with a tap two fingers on the touchpad, but everything simply, nothing happens. In the options 2 finger Alps touchpad click fires and the small sample animation clearly shows how a tap two fingers works as a right click.

    I'm pritty sure this is a software / driver issue, but I have installed v8.201.1611.250 and no new version seems to be available.

    Anyone else had this problem or knows how to solve?

    Hey spidey101,

    Thanks for your help! Remove and reinstall the drivers of the ALPS do not solve my problem, so I kept on looking and fortunately found a solution in this post:

    https://forums.Lenovo.com/T5/Lenovo-P-Y-and-Z-series/Y50-70-Alps-touchpad-add-2-and...

    In the registry settings, I changed the following parameters:

    "HKEY_CURRENT_USER > software > Alps > Apoint > Guesture.

    "2TapSupport" = dword:00000003
    "Enable2Tap" = DWORD: 00000001
    '2TapFunc' = dword:0000000 d
    "2TapSetting" = dword:000000ff
    "2TapShow" = dword:00000009

    !!! And I had to make the same changes in "HKEY_LOCAL_MACHINE > software > Alps > Apoint > Guesture ' in the work of tap to '2 fingers as a right-click' on my U31-70.

    Best regards

  • I've lost the last two digits of my valid key for xp pro sp2 and notebook, how do I get the key and support? where?

    I've lost the last two digits of my valid key for xp pro sp2 and notebook, how do I get the key and support? where?

    Hi Jonathan,.

    Please go to the Microsoft Community Forums.
    After the description of the question, I understand that you have lost the last 2 digits of the product key.
    Let me go ahead and help you with the issue.
     
    Please answer these questions, which will help us to help you best.
    1. How did you get the product key?
    2. the operating system come preinstalled on the computer?
     
    I suggest you for the link and check if that helps:
    How to identify, locate, and replace a product key
     
    See also:

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
  • Two fingers tap (right click) not enabled

    Hey guys, I was wondering if someone could show me how do to activate the two fingers press the pad touch dell. I have an Inspiron 3521 and when I started using it I have to right click with my touchpad and then he stopped for some reason any. Would appreciate the help thanks. :)

    Here is the step by step solution I solved the problem for two tap finger right click with my DELL. Just follow the steps...

    1. Press Win + R to open run, type regedit and press ENTER to open the registry editor.
    2. Go to "HKEY_CURRENT_USER\SOFTWARE\Synaptics\SynTP\TouchPadSMB2cTM2382".
    3. On the right, double-click the "MultiFingerTapFlags" entry and update its value to 3.
    4. On the right, double-click the entry '2FingerTapAction' and update its value to 2.
    5. After, go to "HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Win10".
    6. On the right, double-click the "MultiFingerTapFlags" entry and update its value to 3.
    7. On the right, double-click the entry '2FingerTapAction' and update its value to 2.

    It is necessary to restart.

    PS: If you do not find the "2FingerTapAction" just create a DWORD 32 bit, rename and update the value.

    I hope it works!

  • Spaces in line in Doc w / notes in the form of two or three lines of blank space will appear at the bottom of the body of the text

    I am writing a thesis with a lot of commit and annoyingly, often two or three lines of blank space will appear at the bottom of the body of the text (not the reference section) on a given page. Fiddling around with notes (increasing or decreasing their), or with the body, which is sometimes useful, but it's not ideal - I wouldn't need to change what I say artificially in order to use the space in the body of the text... Any help is appreciated.

    Hi Peter,.

    What application you use to write the thesis?

    If you use Microsoft Office word, then I suggest you to send this request in the dedicated forums for office for assistance. Here is a link to the forum:

    http://answers.Microsoft.com/en-us/Office/Forum/Word?tab=threads

  • 871W wired connect/ping with wireless devices

    Hello

    I have a 871W giving me fits.  I've been troubleshooting this for some days now and may not know what I am doing wrong.  My wired clients cannot communicate with wireless devices.  My wireless devices are unable to communicate with each other.  However, my wireless devices CAN connect to a wired device!  I know because I have a local webmail server on the side wired can be achieved wireless.  All devices, wired and wireless, are on VLAN 1, which is be the only vlan configured.

    My configuration file properly disinfected is attached.

    When I try to ping from a wired device to a wireless device, I get the following error:

    ~ $ ping 172.27.44.27
    PING 172.27.44.27 (172.27.44.27) 56 (84) bytes of data.
    From 172.27.44.3 icmp_seq = 1 Destination Host Unreachable
    From 172.27.44.3 icmp_seq = 2 Destination Host Unreachable
    From 172.27.44.3 icmp_seq = 3 Destination Host Unreachable
    From 172.27.44.3 icmp_seq = 4 Destination Host Unreachable
    From 172.27.44.3 icmp_seq = 5 Destination Host Unreachable
    From 172.27.44.3 icmp_seq = 6 Destination Host Unreachable

    -172.27.44.27 - ping statistics
    8 packets transmitted, 0 received, + 6 errors, 100% of time packet loss 7051ms
    pipe 3

    ~$

    Wireless devices simply timeout trying to ping each other.

    Thank you for your help.

    Chris

    Is there a firewall on the host wireless?

    Do you have wiresharked any traffic to see if it is to hit the dest host?

    Look at the config looks ok. Some additional ACL that I've not seen it used is here.

    Can ping wireless and wired a public IP address?

Maybe you are looking for

  • Add the button reload for the new theme?

    I know that I can go to the "Restorer of original theme" theme, but I don't like it. I want the button reload in the brand new theme! How can I get there? This should be a painless option to add, not force people to change the theme. I am sad to say

  • Can I replace the graphics card on Satellite Pro A100

    Hi all Just a quick question about the graphics card in my Satellite pro a100 computer laptop. I heard different stories about this. The ATI RAdeon Mobility x 1400 card can be replaced on this laptop. If so how easy it is to do and how I could tell w

  • HP dv7t-6100 CTO LM726AV: no sound HP dv7

    I have no audio work on my dv7. Previously I have just re - download and reinstall the audio drivers and that worked. That was not working. I downloaded and installed the update of the current bios with no luck. This laptop came with Beats Audio, but

  • Safari does not play well with Photobucket, Chrome not much better.

    I use Photobucket a lot and with Windows, it's great, but since I use a Mac, nothing but problems, with less Chrome.  Operation in very slow cursor handling Photobucket, difficult.  Any change, I can do on my Mac to make things better.  What hosting

  • Laptop HP G56 - 125NR GEL

    My machines operating system is Windows 7 64 bit. My machine freezes after 10 minutes, no matter if I'm on the net or desktop. There is no "any error message either. Ive already updated the latest version of the BIOS, but that has not helped all t. W