on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

Similar Questions

• How can I use my admin account when I forgot my computer password?

  I was recently reading to make a password reset disk. I did it successfully. I also redesigned and strengthened my index of password to make it just something I'll remember.

  I also read that I could also connect to my laptop using my administrator account, if I forgot my password for the regular user. I don't know how to do this. The Vista Welcome screen shows my normal username when I start my computer. How to access my administrator account?

  It comes to my laptop. I'm the only one using it.

  A couple of years, I've had problems with one of the Service Packs. I had a very good help from Microsoft. One of the people helping me explained how to connect using the Admin account to display system information. I think she used the DOS prompt to change a setting. Then the Welcome screen showed the Admin account. But, if I can't log on my computer to do this, I can't do the account Admin appear on the Welcome screen. Is there another way to display the administrator account on the home screen?

  Ken

  Please re-read my first answer about your options.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• The computer that I'm working on now is obsolete... I bought a new one with 2 terabytes of memory external. How can I transfer all my photos on my new external drive and install cloud creative adobe on my new computer?

  The computer that I'm working on now is obsolete... I bought a new one and also bought an external hard drive of 2 terabytes. How can I transfer all my photos for 2 terabyte external and also transfermy subscription to my new computer?

  Hello

  You can refer to link below for download cloud Creative: -.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  
  

  Hope this helps!
  

• I have windows XP and installedOffice 2010. The problem is that when I start windows Messenger starts. How can I stiop to happen?

  That's the problem

  In the title

  Hello

  You can refer to the following steps:

  a. open Messenger.

  b. press the ALT on your keyboard to display the menu.

  c. choose Tools and then Options.

  d. click the sign-in the section on the left, then uncheck the option 'Automatically start messenger when I connect' as well as 'Allow' auto-sign-in options
  e. click OK, and then the Messenger of exit completely by double clicking its button on the taskbar and choose "close all windows."

• can I use a windows 7 Professional key to activate windows 7 starter edition

  can I use a windows 7 Professional key to activate windows 7 starter edition? I have a key that is not used, and I would like to use it on windows 7 starter edition. Is this possible?

  can I use a windows 7 Professional key to activate windows 7 starter edition? I have a key that is not used, and I would like to use it on windows 7 starter edition. Is this possible?

  Sorry, it is not possible. Only a Windows 7 Starter Edition key can activate Starter. A door-key Pro only lights Pro.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How can I close my hotmail account?

  I have to close my hotmail account as it has been compromised.  the system cannot me too.

  Hello

  Please see the answer in your other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/how-can-you-close-a-Hotmail-account/3a18bf4e-b04e-E011-8dfc-68b599b31bf5

  The question you have posted is bound using Windows Live (hotmail) and would be better suited in the Center to help Windows Live Hotmail. Please visit this link to find a community that will provide the support you want.

• How can I remove my Microsoft Account?

  Original title: Aleksejs Spiridonovs

  How can I remove my Microsoft Account?

  Hello

  Thanks for posting your query on the Microsoft Community.

  As you mentioned that you want to remove your Microsoft Account.

  I suggest you to refer to suggestions provided by Jean-Claude Romanky, January 20, 2013 in the thread below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-ECOMS/how-can-i-delete-a-Microsoft-account-from-a/1cffb727-1bed-4AD3-9919-a46cffe93d27

  I hope this helps. Please let us know if you need additional assistance. We will be happy to help you.

• How can I check to see if I have a corrupt registry

  How can I check to see if I have a corrupt registry and how do I fix this problem

  Hello

  If you have a damaged registry, there will be an error message and system problems are not associated registry.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  ------------------------------------------------------

  In some cases, an in Place upgrade/repair Installation is required which allows to keep the programs
  and although redundant data backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Hope these helps.

• I can't open winmail.dat (13.9 KB) which is attached to an AOL e-mail. I have Windows XP Home Edition. How can I open this file?

  I can't open winmail.dat (13.9 KB) which is attached to an AOL e-mail.  I have Windows XP Home Edition.  How can I open this file?

  original title: winmail.dat

  Try using Winmail.dat Reader

• How can I find the MAC for Windows 7 Starter Edition address?

  How can I find the MAC for Windows 7 Starter Edition address?

  You use the same method as for all other versions of Windows:
  1. click on start, then type the three letters cmd into the search box and press ENTER.
  2. Enter the following command and press ENTER:

  ipconfig/all | more

  Search for the word "physical".

  Here's an alternative:
  1. click on start, then type the three letters cmd into the search box and press ENTER.
  2. Enter the following command and press ENTER:

  ipconfig/all > "% UserProfile%\Desktop\IP.txt".

  You can now double-click the IP.txt file to your desktop and review at your leisure.

• upgrade from windows 7 starter edition to professional b and I want to go back to the starter, how can get on this subject and also the number of activation and the production of my Starter how do I get it?

  I updated level of windows 7 starter edition to professional but I want to go back to the starter. How do I go about it. I also want to know how can I get my product number and the activation number.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Samsung: Press the F4 key to the Samsung logo when you turn first.

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

• How can I get a new computer for Windows 7 starter edition to Ultimate?

  original title: if I do this, how is it working?

  I wat to buy this computer, but it comes with windows 7 starter edition, if I upgradute for windows Ultimate edition will be how it works?, because I want to use only the recognition of the word in Spanish, this is the only reason why I want to buy it, the computer is the following: Acer Aspire One 10.1 "AOD257 Netbook PC with Intel Atom N455 processor & Windows 7 Starter."

  • Intel Atom N455 processor
    1.66 GHz, 512 KB L2 Cache
  • 1 GB DDR3 SDRAM system memory
    Allows you to do the computer basics of web surfing, emails and documents
  • 250 GB SATA hard drive
    Store pictures of 166 000, 71 000 songs or 131 hours of HD video and much more
  • 10/100 fast Ethernet, LAN 802.11b/g/n wireless
    To connect to a modem high speed with Ethernet wired or wirelessly connect to a Wi - Fi signal or a hotspot with the 802.11b/g/n integrated PC connection
  • 10.1 "WSVGA CrystalBrite LED blacklit display
    Intel Graphics Media Accelerator 3150 with 64 MB of video memory dedicated.
  • I want to use it only for speech recognition in Spanish, no games, no additional program?
  • Thank you.

  http://www.microsoftstore.com/store/msstore/en_US/PD/ProductID.216647200

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/Windows-Anytime-Upgrade

  Tom Ferguson

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• My computer crashed and I had to clean and reload windows 7 Professional. How can I reload the software from Adobe. I have connected on my Adobe account, but there is no record of my purchases.

  My computer crashed and I had to clean and reload windows 7 Professional. How can I reload the software from Adobe. I have connected on my Adobe account, but there is no record of my purchases.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How can I open a photo in edit mode

  A picture, how can I open a photo in edit mode so I can change it?

  Select the Photo, and then press the return key or select view tools to edit under the Image option in the top menu.

  The option adjust in editing tools extend to the various adjustments when you click on this one. You can also add adjustments to this point of view, which are available by clicking on the Add button.

  See you soon,.

  GB