on xp family. Windows cannot open help and support because a system service is not ongoing enforcement.
Windows cannot open help and support because a system service is not ongoing enforcement. to resolve this problem, start the service called help and support
Welcome to the Microsoft Answers community.
In doing research, I found this article in which people have found a solution:
I hope this helps.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
"My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.
Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.
Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?
You did changes to the computer, before the show?
For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.
Check out the following link.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 how to back up and restore the registry in Windows
Connect the external hard drive on another USB port and check.
For the problem with the help and Support, check if the service is enabled.
a. click Start, click run. In the Open box, type services.msc and press ENTER.
b. right-click on the service called Help and Support , and then select Properties.
c. under the general tab, set the type Startup to Automatic and click Start.
d. close the services window and check for the issue.
I can't open windows help and support. I get a message saying "windows cannot open help and support because a system service is running, to resolve this problem, start the service named help and support.
How can I open help and support, I get a message telling me that I can't open it, as a system service runs not to solve the problem open help and support!
How can I open help and support, I get a message telling me that I can't open it, as a system service runs not to solve the problem open help and support!
Long time since I used XP but I seem to remember that if you do start - run msconfig [back] in my view, there are Services tab there where you can change the aid stopped service to start.
If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog
Original title: help & support
When you try to use help and Support on the start menu, a small window opens saying "Windows cannot open help and Support." To troubleshoot the problem, see Help and support. "It's double Dutch to me. Can someone help, please?Hi EdwardBahr,-Remember to make changes to the computer between the calendar when things worked fine and now?Try the steps listed in the following article and check, if it helps in fixing the issue:
I have a new Satellite L30, but can't access MS Help and support on the start menu. He did something in that hard drive active and so on but no help and support screen comes up. I'm sure it was there a few days of ideas?
How about using the System Restore tool?
If the option help & support has worked a few days ago, so I think he should be able to roll back the BONE until the beginning.
I think this procedure should help.
But try to use this path in the immediate window:
For more information, please see this page:
When I click on help and support, I get the error message:
"Internet explorer cannot download / help.
How can I fix it?
Try again when your laptop is connected to the Internet. As far as I know it works if the laptop is on the net only.
I get the diagnosis "Windows Media PLayer cannot play video DVDs. You may need to adjust the display settings of Windows ", etc. But I can also not help & Support 'because a system service is not running.
The problem may be something that I deleted, but I can't go in the system restore back to an earlier time
1 have had any changes made on the computer before the show?
2. what operating system is installed on the computer?
3. when exactly you get the error message?
4 are. what system service you referring? What is the full and exact error message?
5. what happens when you try to do a system restore?
See the link and check if it helps:
Windows Media Player Error Message help
If the problem is not resolved, please provide more information to help you best.
I can't open Windows Help and support. When I click it it says"Windows cannot open help and Support.because a system service is not running. To resolve this problem, start the service named 'help and Support '.How to start this service. I use win XP SP 3
To start the service, bring up the Services window:
Start-> Run-> "services.msc".
Right click on 'My Computer'-> Manage-> Services and Applications-> Services
Double-click the line that says 'help and Support '.
Make sure that "Startup Type" is "Automatic" and "Service status" is "started" (if not, click 'Start').
Original title: help and support on windows XP Home Edition / ' helpctr.exe no path of the Panel start.
He is also said to open help and Support, but when I get the file he doesent exsist. I typed the micrsoft directions but it just says: the same thing-Windows cannot find helpctr.exe... then when I try to search in the Middle it says librrary something LONG when I X out the screen goes blank then comes back healthy Windows open a window I have never heard od to type a regrestry or something can someone help me with this questionFound that I had the same problem here: http://support.microsoft.com/kb/555472
"To solve the problem, follow these steps:
Go to the Windows registry.
Navigate to the following registry key:
-Double-click HELPCTR. EXE.
Right-click (default) in the right pane, and then click on edit.
Type the following command:
Exit the registry editor and restart Windows XP".what I did export this key to work windows XP install and import the reg file for windows failure or you can manually create the key and send it to point to the location of the file if the file is missing then copies the file u do not know if the file differs from the House of Pro but its another option to take if U'r is still stuck.Sort my prob was the corruption in the reg for missing file that the hotfix may not work as such. If U still have the problem (cause the post is old) so good luck
I bought the laptop three months ago and activated Microsoft updates automatically on my machine, thanks to these updates I can not open help and Support Center icon because it blocks the machine. (Start > then click on "Help and Support") Can someoone advise me what I should do to fix the problem?
Strange, but I've studied a bit on the net and found the very interesting site:
I just downloaded codecs on a website affiliated to microsoft. I decided to remove this program and my desktop icons went, including shortcut icons. Double click on these icons got me the message "Windows cannot open this file". Then displays a folder on my desktop more Winxp32. Great, now my whole OS is on the desktop in a folder and I can't open any file. I have since run REGEDIT. EXE and am waiting for additional help in our community... God bless my friends and what you believe in... ME
A restore of the system at a time until your problem should solve your problem. Since you can not click on shortcuts to start programs, you may need to start restoring the system in accordance with the following article:
"How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
Registry key: HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/App Paths is missing HELPCTR. EXE. Want to know how to reinstall HELPCTR. EXE.
First see if it works:
The Center help and Support sometimes get broken with overzealous cleaning and there are a lot of things to 'try' who sometimes work and sometimes they are not. Sometimes people drop everything simply and never reuse Help and Support Center, but it can still be repaired.
Do you now or nave already used third-party applications on your system where the product description includes descriptive as sentences:
cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. guaranteed or all that has an icon that looks like a key, the key or the screwdriver?
We will restore some things in the registry who sometimes kill himself by malicious software or, sometimes, these cleaning programs.
Before making any changes to your registry (although I hope that this update), make a copy of your registry with this free and popular tool:
Then go to this page WWW of Riou (thanks, Ramesh).
When you click the file startmenuhelp.reg on this page with your browser, you will see a bunch of text that
is the registry information that you want to apply to your system. It seems daunting, but it's not so bad.
Press Ctrl + A to select all the text, then press Ctrl-C to copy the text to the Windows Clipboard.
Click Start, run, and then in the box, type:
Click OK to open a new Notepad file.
Press Ctrl + V to paste the information that you copied into the Windows Clipboard in the Notepad file. Save the new notebook
file on your desktop and the name of the new file something he can hold, as:
Quit Notepad and double click the file startmenuhelp.reg on your desktop and answer Yes to
the query about adding information to your registry.
Test your help and your support now, then restart and test again to make sure that the changes 'stick' with a reboot.
You can delete the file startmenuhelp.reg to your desktop.
If that does not do it, we just reinstalled the whole shebang (help) and Support.
Title: vista help and support will not start. message from the Red Cross directs me to this site, but none of the suggestions work. Come on get your fingers out microsoft and solve my problem
vista help and support will not start. box comes with red cross and a link to the microsoft support. None of the solutions presented work. pressing F1 does not work and I can't find help and I support anywhere on the system. even downloaded winhlp32.exe with no result. solution please.
Hello-What is the exact error message / complete you receive?-You are aware of any changes made on the computer before this problem?Method 1: To resolve this issue, start the Help and Support Center service and set it to automatic. To do this, follow the steps mentioned below:
(a) click Start, run and type Services.msc.(b) double click on in Help and Support.(c) to set the Startup type on automatic.(d) start the Service.Method 2: (SFC) System File Checker
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
(a) click Startand type cmd in the box start the search.
(b) right click on cmd in the programs list and then click run as administrator.
If you are prompted for an administrator password or confirmation, type your password or click on continue
(c) for the command prompts, the following line and press ENTER:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?Method 3: Follow the steps from the link below and check if the problem persists.I can't open the help that was created in Windows Help format (WinHlp32.exe)Hope this information helps.
I tried to search, but fine, I could not open as system service is missing
You can look at http://support.microsoft.com/kb/888018 to see if it applies to your situation, but be careful. Editing the registry can be very dangerous, please make a backup of your registry before making a pass at her.
For more information on how to backup/restore the XP registry, please visit:
Absolutely no warranty express or implied is delivered with this post. The poster will be held not responsible for any physical, mental, emotional, or financial loss resulting from the use of suggestions or information contained in this message. Entities who follow the advice in this post are at their own risk.
I use Windows XP Professional on my laptop HP DV9000.
When I try to open the help and support service, I get a message saying "Windows cannot open help and support because a system service is not ongoing enforcement. To resolve this problem, start the service named 'help and Support." »
I searched many websites for more information about this problem without success.
I tried to locate the program itself and once again without success.
I did nothing to my laptop in some time (months) and have installed SP3.
I tried to follow the instructions in my research, I hope, it's enough to find help here.
Check here: Control Panel, tools, Services, administration, scroll down to: help and Support, and then double-click to open the page.
Startup type: automatic
The service status: click Start, click OK
Maybe you are looking for
Hello I would like to start an automator script in a command shell with the automator command (see automator man). I would like to pass an argument to the script (such as a list of files) too much with the i - settings but my syntax has failed. This
the update has started very well, but was murdered on stage three for a few days. the computer continues to restart on every two seconds, but remains always on the third stage. I tried to stop restarting the computer snd it but the same screen comes
How can I print 11 x 17 on my newly purchased 7612 thanks to ePrint printer. If it isn't that a way will there be an update soon?
Hello! I have a problem with BlackBerry 10 Dev Alpha Simulator. When I go into the VM for the 10 Dev Alpha settings BlackBerry Simulator and enable development mode, the icon of the Mode of development will not displayed it. I can't see the IP addres
I have a laptop of Acer windows 8 that won't start - it has one blue screen with an error message and other options that work. I do not have a windows 8 dvd or any other device installation and I cannot restart my factory because I have files that ar