Once I connect my Photosmart C4780 to my wireless network, I lose everything internet.

Similar Questions

• I'm trying to connect my photosmart 2610 to a wireless network. Following the online instructions, I have

  I'm trying to connect my photosmart 26110 printer to my wireless home network. By following the online instructions, I find when I get to the network menu on the printer, I don't have a network configuration option. So now what?

  The printer is currently connects to a PC via USB. I want wirelessy this network printer for my Mac to print to it also.

  LAN means Local Area Network.  It comes to your home network.  WAN means Wide Area Network.  This is the port to connect to your service provider, or in other words, where the Verizon's Internet connection needs to connect.  It shouldn't be to hard to get the Macbock to install the printer on the network.  The document below will guide you in the process.  Let me know what happens.

  Install the software from the product under Mac OS X for a wired network connection (Ethernet)

• Cannot connect my Photosmart C4780 to my network wireless (home)

  Hello

  I searched this forum and tried to solve my problem, but none of the elaborate suggestions.

  I have a Photosmart C4780 and am under OSX10.8

  Recently, our internet provider changed our wireless router and our SSID. As a result, the printer that is connected to the original network and properly functioning has stopped working. I tried to connect the printer to the new network, but failed. He said now that the printer is connected to the hp network (something) and I can't change it for the new SSID.

  Could you please tell me what to do? I have installed the software mentioned in the HP website, plugged the USB cable into the printer to try to set it up, but it says that the printer cannot find any existing network (although I'm next to the printer and connected to the intended network wireless)

  Fact a little kind of hard-reset on the printer can be a good strategy? How can he do?

  Thanks in advance

  Pedro

  PS: The printer works correctly when printing via USB

  PS2: It is not an option to return the SSID of the router to the previous

  Hi @pedroa

  You say "I have installed the software mentioned in the HP website", but there is no software for the compatible with 10.8 c4780. Mountain V10.8 OS X Lion: installing and using the printer on a Mac with the Mountain Lion.

  As you know, this printer has not a wizard wireless version in the front panel instead us would typically connect the USB cable from the printer to the computer and run the installation wizard.

  Because you have 10.8 on Mac, and it there is no full feature software and drivers, you won't be the configuration wizard, to configure the printer. You may be wondering now, well how can I set up then?  Good question, we will restore the default network printers and the printer will have its own IP address designed for whats called an Ad-Hoc connection (wireless router). We will put the computer on the network printer and then print a report to get the printers IP address. At this point, we can access the built-in web server (EWS) and run the wireless from there. Once the printer on the network with the router, we can put the computer on the network and vuala that the printer and the computer will be on your network.

  To restore the default network settings - since you have done this before I guess you know how, but for others who can see the message, here are the steps

  1. Press the wireless button
  2. Select wireless settings
  3. Scroll and select default network.  Press Yes to recognize
  4. The radio turns off (the blue LED turns off).  You may need to press the wireless button to turn on wireless

  Put the computer on the network printer (temporary)

  1. click on the symbol of the airport on the upper left side of the screen Mac
  2. choose the network looking compared to the printer (we could say a variant of the name of your printer or HP setup) - it may take a few minutes to make it appear

  Print the wireless network test - wait a few minutes to make sure the computer have established an ad hoc connection, otherwise the report will not have an IP address

  1. Press the Scan button (it also the wireless menu button)
  2. Select wireless settings
  3. Testing wireless access, then select.

  The wireless network Test prints, search and note the IP address.

  Open a browser (Safari) and enter the IP address in the URL (address bar).

  Click on the network, on the left tab, click on wireless or 802.11.

  At this point, we are looking at fore 'start the wizard' should be on the right side.

  

  As soon as we will have to set up the printer to your network, you can put your computer on your own network.

  Now you can add the printer in system preferences and print

  Please let me know if that fixes the problem, thanks.

• Photosmart C4780: connection for Photosmart C4780 wireless

  I spent two hours through the simplistic menu of the printer, only to print copies of the Configuration Page of HP network and Test wireless network without success reports. I think I made all the necessary steps... such as the restoration's default network.

  "Your HP printer cannot find your wireless router. Check that your wireless router is powered. Make sure that your network printer HP (SSID) name exactly matches the network name (SSID) wireless routher yout. If they do not exactly match, run the installation of the wireless network to set up your HP printer.

  Well, I have entered my IP address of the router as the url of the browser and connected to my cable account, but was not able to change the SSID.

  I also looked at the Youtube page help HP and on discussion forums and tried to use the suggestions.

  One who seems to be similar to my situation is this:

  http://h30434.www3.HP.com/T5/LaserJet-Printing/driver-for-HP-Photosmart-C4780-for-OS-X-Mavericks/TD-...

  I, too, can't find "the HP network configuration.

  I also downloaded the Printer Driver HP Patch for my OS.

  At this point, I'm not sure that I can do. The other suggestion on this page was to find a friend with a PC. I phone my mother on-site, running Windows 10. I also downloaded its respective driver. I don't know what I should do next. Any help would be appreciated.

  I have a D-Link router, and I can provide additional information, such as IP, WiFi SSID, pine, etc., if necessary.

  Hello

  You need to press on you first, WPS option on the printer.

  Please, try this and let me know how it goes:

  1. On the printer control panel, press the button next to Scan, and then press the button next to the Wireless Menu.

• HP Photosmart C4780 - cannot operate wireless

  I just spent 5 hours trying to implement a new Photosmart C4780, I bought for my mother.

  I ran through the installation easily enough and chose to use the wireless printer. He took a series of measures, including the selection of my wifi network, enter the key security etc but at the last stage, it failed without explanation. I don't remember the exact message, but it was something in the sense of "the printer could not be completed.

  I tried again and again to complete this and things seem to go from bad to worse.

  1. now, when I reached the page "search for wireless networks" it shows without networks despite Windows 7 showing at least 10 networks in range. I have to manually enter the SSID details and although it seems to work, the installation still fails in the final phase.

  2. strangely, the printer now seems not be able to start up. I unplugged it etc and when I turn it on the screen shows the HP logo with what appears to be a below progress bar. It's never happened that.

  I desperately need to get this job because I won't be home from my mother to Spain for the weekend. HP support seems to be Monday to Friday only, which is not very useful and there is no way on earth she could do it voluntarily.

  Any ideas on what to do next?

  OK on the front panel of the printer: Setup > WIreless > start WPS > Pushbutton.  Within 2 minutes, press the the router WPS button.

  This will connect the printer to the wireless network, then simply run again the HP software (Printer Setup & software) to complete the process.

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• Photosmart C4780: Reconnect my C4780 to my wireless network

  My C4780 was connected to my wireless network.  I accidentally restored my default settings for the network, and now I can't find a way to connect it to my network?  On the network Page of Configuration, I can see my SSID listed in the 802.11 networks discovered list, but my wireless status shows "disconnected".  The Test report of the poster PASS on wire and wireless wireless network works, but fail the network name (SSID found on).  Down in the summary section of the Configuration of this report, it lists a SSID that is not my network or one of the networks that I can see in my area.

  Reset the printer to Factory Defaults and all start over again.  Do not attach the USB cable.  Try now.

• Connect my HP C4580 to my wireless network

  My mother gave us his old HP Photosmart C4580.

  We do not have the installation disc.

  We run Mac OSX 10.9.3

  Printing software downloads automatically when you connect the printer via the USB port.

  We run a Comcast wireless router

  How we install the printer to print on the wireless network?

  Any help appreciated.

  Hi richards-k,.

  Sorry, this model has the old embedded Web server.

  Once you click Wireless (802.11), you can simply fill in the information of the network.

  If you do not know the encryption network made me know. You can also call your router company for this information.

  Here is a screenshot of the fields to fill.

  

  Enter the SSID. (your network name)

  Select Infrastructure.

  Select the encryption type. (WEP, WPA or Open - no password)

  Apply the settings.

  You have now completed the configuration of wireless network.

  Click on the airport on the upper right corner on a Mac and select your network.

  Click on the Apple.
  Click System Preferences, click the printers and scanners, and then click on the + sign, then select the printer in the list, make sure that the printer is listed beside the use: displays the name of the correct printer and not Airprint, (Airprint is a driver apple pre-installed with the basic features) click on the Add button. You may need to click the drop down to select your printer.

  Test the printer.

  Then switch back to printers and scanners and remove it from the list for the USB driver.

  Unplug the USB cable.

  Please let me know how you did.

  Thank you.

• Photosmart C4380 - not found wireless network

  My photosmart C4383 than worked fine with wifi since 2007, but yesterday he lost his IP address.

  I ran hp-setup, with connected USB and the network connection has been restored, but he disappeared after

  the first attempt to print. After that, each running hp - Setup fails with the message

  'No wireless networks found', although my wifi, provided by a Netgear router, works very well, as I have

  4 devices connected, and they immediately find the wifi on reboot.

  I don't see any explanation, except that the problem is with the photosmart himself.

  Am I wrong?

  Hey @pfrenkiel ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  I understand that you encounter connectivity problems on your Photosmart C4383. You are able to make it all work, but you are not able to get on the wireless network more.

  With the printer being as old as it is, it could very well lose functionality in its internal modem. It is not a replaceable part unfortunately. This is probably what happened because you are not able to see more networks of the printer.

  You can either continue to use the printer via the USB port or upgrade to a new printer.

  I wish I could help you on the Forums, but I simply can't. Best of luck and hope this isn't too much inconvenience.

• laptop does not connect to my wireless network it says "no internet access.

  I am not able to connect to the internet using my wireless network, I can connect to other networks, but it won't let me connect to mine it comes up with a message saying "no internet access.

  I called my broadband provider and they said that something is wrong with my laptop.

  What could be wrong?

  II tried to remove and add my network again to restart my lapop in safe mode, and then reinstall the wireless network and I have also restarted my router and laptop but I stil get the same message

  can someone help me?

  Thanks in advance :)

  Reema,

  There are several solutions here and you have not specified what solution you have already tried and did not work. Check the posts here and specify what solutions did not work for your question.

  Additionally, you mention that you tried "installation of the wireless network" in Safe Mode. This means it that you were able to connect mode without failure, but not in the Windows? If so, you should try a clean boot to identify the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Continuous wireless network adapter lose its network connection

  It used to work very well in the beginning, but after a many windows updates, my laptop has started to lose the Wi - Fi connection every several minutes.

  Windows troubleshooting utility usually fixes the problem of reset wireless network card. Sometimes, however, it does not set it up that I restart the PC.

  The issue is not with a router because I have experience with different wifi too.

  I have Toshiba Satellite laptop computer with Windows 7 and Realtek RTL8723AE wireless adapter.

  Here is an example of this that convenience store says:

  Helper class: Layer2 Security
  Initialize status: success

  Result of diagnosis: problem found

  Root cause:
  Windows cannot connect to "mywifi".
  The wireless network security key is not correct.

  Detailed root cause:
  Layer 2 security key exchange using the key provided by the user did not generate unicast keys before timeout

  Repair option:
  Check the key to network security for "mywifi".
  View the security settings. You can then type the correct security key.

  Information for a diagnosis of connection
  Interface GUID: {b63a89ca-8412-49ed-9619-ab7f3dfa4504}
  Interface name: Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC
  Interface type: Native WiFi
  Profile: lazarfox
  SSID: mywifi
  SSID length: 8
  Connection mode: Infra
  Security is enabled: Yes
  Login ID: 7
  Security settings provided by hardware manufacturer (IHV): No.
  Profile matches network requirements: Yes
  Status of Pre-association and association: success
  Security and authentication:
  Configured security type: robust network security (ARS / WPA2) for independent networks
  Configured encryption type: CCMP (AES)
  Security connect status: 0 x 00048005 failure
  Number of security packets received: 0
  Number of security packets sent: 0
  802.1 x protocol: No.
  Key exchange initiated: Yes
  Unicast keys received: No.
  Multicast keys received: No.

  ... I suggest you to update BIOS, chipset and wireless network drivers these links and check if it helps...

  Hi, Yann,

  I updated the driver, but it did not help. Update the chipset has probably not because I have AMD (the update says that I don't have the required devices). BIOS has been updated some time (I have the latest).

  I also searched other topics and did the following:

  Disabled IP assistance service;

  Value another configurtion IP: manual and entered a fixed IP address and the default gateway.

  Turned off the Windows Firewall for this network.

  The problem seems went, at least for now, although I don't know what stage did.

• no connection is available... all wireless network disappeared... what I do

  disappeared from all wireless networks

  "no connection available.

  3 month old Dell inspiron windows 7

  impeccable wireless on old laptop

  Dell drivers and Utilities disc is weird... not me explainatory

  Most laptops have a button On / Off to toggle the wireless connectivity to security purposes. Dell Inspiron are usually Fn + F2 (noted with a little blue on the F2 key). Try typing this key combination to see if your wireless network can easily be reinstated.

  Fn + F2 is not correct, the other possibilities for a Dell would be Fn + F8 or Fn + F12. Look for the blue identification icon.

• Connect an ESXi server to a wireless network

  I want to set up ESXi on a wireless network in a non-production environment.  The plan is to use a bridge such as:

  http://store.Linksys.com/adapters/Linksys-WRT610N-WirelessN-gaming_stcVVproductId65221232VVcatId543809VVviewprod.htm

  Then to set my ESXi host to get an IP via DHCP.   I could connect my interface standard integrated network to the bridge using a regular cable.  (It is a regular physical server ESXi 5.x).

  It will seek to establish ESXi on the network?
  Can I then add VMs on that host behind the same bridge or I can't get an IP behind the bridge?

  Ok thank you

• Is it Possible to connect HP Photosmart C4780 to FiOS without CD?

  When I arrived at the origin of my printer, I have Verizon DSL and haven't had no problem setting, the printer via the software CD. Since I spent to Verizon FiOS, but my sister lost the CD. How can I connect my printer to FiOS without the CD and then connect it to my laptop? I have a MacBook Pro (OS X 10.9.1) Mavericks running - any help would be greatly appreciated. I wish I could print wireless again!

  Hi AJoyner,

  You do not have a rare problem.  You must use the software on the CD for the printer connected to the network.  You may not use the software on the CD with OS X 10.9.1.  Once the printer is connected to the network, you can use this document to install the printer driver.

  http://support.HP.com/US-en/document/c03967522=

  You can use a Windows or Mac running a version of the OS that is authorized by the CD.  The Windows driver can be downloaded and used.  But you would need to use another computer to get the printer on the network and then it might work wireless with 10.9.1

• I have a Kindle fire that does not connect to a new modem, Qwest Wireless. I tried everything I can think of. can anyone help?

  the network shows on the kindle and force is excellent, but the error is will not connect.  If I put in the wrong password it says I have a password

  error?  can anyone help?

  If I were in your shoes, I would not maintain with Amazon, these forums.