Once I used internet I can't use any other program. I have to restart my computer to be able to use the computer again.
I use internet often and everything works OK. After I log out, I can't use any other program in my computer, Google Earth, Microsoft Office, Microsoft Works, etc., the computer can not open any program. The only thing that works is the Start button, but no program works. Any suggestions will be greatly appreciated.
Start your computer in a clean boot and check for conflicts with third-party software.
http://support.Microsoft.com/kb/929135
Note: please follow step 7 of the article mentioned above to start the computer normally, once completed the necessary troubleshooting.
If you still encounter the same question please you start a computer in safe mode with network and check.
Note: in case you have a wireless connection you will need to perform additional steps to connect to the in safe mode with network wireless internet.
Start your computer in safe mode with network.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 3
Scan you computer for infections.
Tags: Windows
Similar Questions
-
Hi guys,.
When you type information in a form in the DC or Pro Player I can enter text with fields of text etc and then save, close and return later to change the form. However once I use the function "Fill & Sign" to sign the document, and then save, it locks the file and all other fields become editable. Is there a way around this to remove this feature where it becomes locked and instead allows me to change the form after a signature is applied and saved. All the security properties of the form are on 'admitted', there is no restriction. Even though the document is locked all the properties remain still as 'authorized '.
The signing is FINAL. You cannot sign a PDF paper advance. Complete and save, do not sign.
-
I replaced my hard drive and format my computer before turning off the software PS. It need my code series now, but I had lost.
How can I solve the problem and use the software again?
If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number. The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use. If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.
-
I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7
@
3 samples of files pm6 and @jay chevako warning message
On Mon, Sep 21, 2015 at 00:25, Jay Chevako [email protected]>
-
I have the creative cloud for $60 or anything like that, and I just want to downgrade using Adobe Premiere Pro. I don't use any other programs and I don't want to pay for it
Please refer to:
FAQ: How can I change to a different plan of the creative cloud?
-
I want to use the Google toolbar. I installed of FF7. I will be able to use the toolbar again if I go back to FF4? If so, how to do that.
If my post has solved your problem, please click the 'Solved It' button next to my first post.
-
Since the update to Firefox 4 my Windows toolbar crashes after a few minutes. Firefox also uses a huge amount of memory. More than any other program and I have a lot of powerful programs. This time 222 000. More than any other program. Critical problem.
I am glad that you are making progress. With all the Firefox test gets I was optimistic, such a problem could not escaped, and that the problem is more likely to be on your own computer.
P. S.
Note there is also a bug not fixed in Firefox, causing several plugincontainer.exe to launch even for disabled plugins turned off cookies (or history).
(see comment under and /questions/812618 #answer - 175409 ) -
I have Adobe CS5.1 and must be able to open the Nikon NEF RAW files from my Nikon D4s... y at - there a downoad on the Adobe site for it or how can I get the update to do?
Hi XDCAMAN,
Photoshop requires at least version 8.4 of camera raw to be able to directly open these Nikon NEF D4S files which is available in Photoshop CS6 and above versions (not in CS5)
Reference article: supported by Adobe Camera Raw devices
You can upgrade to a higher version of Photoshop or download Adobe DNG converter to convert raw files to DNG and access these DNG files in Photoshop CS5.
Kind regards
Claes
-
I can't select any other font that Hoefler. InDesign CC15
Since the update yesterday to Indesign CC15, I can't select any other font that Hoefler. It is only occurs with new text frames. I can change the fonts in the existing documents and the existing text blocks to another font. Anyone have any idea how to solve this problem?
OSX 10.10.3 - Suitcase Fusion V5 (automatic activation of plugins not installed)
Nevermind - clearing the fonts cache solved my problem.
-
I have a single folio paid app and I want to migrate to an app of folio to multi with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi application?
I'm sure that the only way to proceed is to make a free portfolio for all the world in your new application of muli-folio. There is no way to match the records of the purchase of an application with a new application that contains a folio.
Apple wants to see at least one element of the library is available free of charge, in any case if the application has a utility when downloaded from the store anyway.
Neil
-
Once you use the tool gradient on an object, how can reset you it back?
Hello
I have a few items that I used the tool degraded with, just to try a few things, now I'm unable to apply the original gradient to the object?
Is there a way to reset the object to ignore what I changed using the gradient tool? Is in any way to reset the original slope?
Thank you!
Babs
Select the object, apply a fill Uni, then choose the shade of gradient.
-
Current versions of software:
LabVIEW 2014 SP1
LabVIEW FPGA 2014
Xilinx Vivado
Hi all
I plan to interface my FlexRIOs to the software programmed in C, then the C API FlexRIO is excellent.
My question is more economy of memory sake.
I have a PC with Visual Studio, I want to add the minimum amount of software development.
If I have a station (a separate Visual Studio PC PC) FPGA development with all LabVIEW software necessary to take the step of the use of the generator of the C API to create the necessary files of C and H, should what software I on the development PC Visual Studio in interface with the files in the generated C API?
If all goes well, it's just (from the help)
What you need to get started
- Drivers for devices OR RIO August 2013 or later
However... The help of the C API, it gives me the full list of the software including LabVIEW and LabVIEW FPGA... (below)
What you need to get started
In addition to a RIO device like a CompactRIO reconfigurable chassis, a Single-Board RIO device or RIO PCI or PXI hardware, you need the following software to use FPGA Interface C API.
- LabVIEW 2009 SP1 or later (32-bit only)
- LabVIEW FPGA Module 2009 SP1 or later (32-bit only)
- Drivers for devices OR RIO August 2013 or later
- Operating system supported development
- Windows 8 or 8.1 (32-bit or 64-bit)
- Windows 7 Professional (32-bit or 64-bit)
- Windows Vista Business (32-bit or 64-bit version)
- Windows XP Professional SP2
- Windows Server 2008 R2 (64-bit version)
- Windows Server 2003 (64-bit version)
- Target supported OS
- Supported C/C++ compiler
So I have LabVIEW and LabVIEW FPGA on the development PC?
(If all goes well no....)
Thank you
Hey Colonel1013,
With the C API, you only need LabVIEW to build a bitfile and run the generator of C API tool, but LabVIEW is not required to run. That is, you need all the software listed, but it must not all be on the same machine. You can transfer the file lvbitx and the .c and .h files generated on another machine where you need only NOR-RIO and Visual Studio installed.
Sebastian
-
Control of disk runs whenever I starts and then displays windows so I guess it solves the problem, but I can't open any websites, even if I get to the internet. I got my connection verified by my internet provider and I had my system examined by the technical service of my provider of virus & protection all to nothing does not. Where can I find the results of analysis of disk verification? It basically says the disc must be check for compatibility, but at the end of the analysis, it publishes results for just a second. Too fast to read.
It is good - now you know what the problem is and why XP prevents running chkdsk (he's trying to help you!).
Here is a link to the article from Microsoft KB on the XP Recovery Console:
http://support.Microsoft.com/kb/307654You do not need 'install', you will have to 'use' then go to the section 'how to use the Recovery Console. Save installation if for another day.
After step 4, you should be at the command prompt in the folder c:\windows.
If anything it of a little weird or don't look right, or you don't get it, stop and you can make a CD of bootable XP Recovery Console and use it.
Don't forget: you can't question the bit of impurity of the Recovery Console. When the chkdsk /r is running clean (it may take more than one pass), reboot and see if chkdsk wants to run again or not, and then query the dirty bit again if you don't know what it is in the State. The volume must be "not dirty" or chkdsk will want to turn on every restart, until it is.
Once in the Recovery Console, follow these steps:
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
int loose connection after sleep, wake and up no internet still not found or access network AI everything without restarting!
Win7 home premium. after sleep that I return to the CV, model wakes, no enternet no surroundings, net no availible conn, can not find network sharing Center nothing, Control Panel does not open Network Center, after reboot any return to normal until it sleeps again then the same thing. Whatz upward with whom? network dot red top, tray icon click to open the network sharing Center, nada, nothing happens but the circle of rotation of caos.Hello
1. do you receive an error message when opening Network Center?
2. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps mentioned in the links below
http://support.Microsoft.com/kb/937477/en-us
http://support.Microsoft.com/kb/933872
Method 2:
Try to update the network adapter drivers using the link below.
-
After starting cold, without other programs started using Windows 7 Home Premiun for a place in the upgrade, I am unable to capture video DV camera DV over USB. The same setup work properly on Vista Home Premium. (MM6)
By using the menu "Import device", the dialog box "Import pictures and videos" identifies the camera as "Digital vidéo caméras Video Edit".
After the error message out of Movie Maker and reboot, then try again translated by "importing video has already begun."
Microsoft Windows Media Encoder 9 Series do not seem to be available for Windows 7.
Maybe you are looking for
-
Problem with iPhone 7Plus, lightning audio commands, connector and inline
Just bought a new iPhone 7 more and understand that there more listener intake. I have a pair of Bose In-Ear-Headphones who controls inline for voice/mic, volume, etc. But when connected to the adapter and plugged into the connection of the lightning
-
How can I get an IP address from an Xbox 360 that was stolen from me?
My Xbox 360 was stolen recently, and I've never written the IP address for it. Is it possible to get the IP address just to have an online account? also, is it possible to trace the IP address the next time she signs online to get a physical address
-
This morning got the 1.0.18.00 after the upgrade update pops up a window saying unfortunately, "the com.android.systemul process has stopped." and not let what anyone. Necessarily downloaded 700 MB of 1.0.14.00 threw a sd and then I have done since t
-
Hi, I synced my calendar windows (vista)) with my HTC phone, but I lost most of my calendar events in my computer. How can I get it back
-
Virtual MACHINE cannot access the vlan
We have a vSwitch with a portgroup that services our Production network with no VLAN specific specified (0). Gave us access to a new vlan on a physical Cisco switch level in our chassis and basic in our data center switches.VSwitch physical maps sho